Richard, What you found out is correct. You cannot alter AD for specific external routes.
On Sat, Jul 18, 2009 at 6:26 PM, Meraz, Richard <[email protected]>wrote: > The task in Vol1 Lab1 3.10 states, “Traffic to the networks learned from > BB1 should prefer the path viva S0/2/1 over S0/2/0. Traffic to the networks > learned from BB2 should prefer the path via S0/2/0.” > > > > Paths from BB1 were internal to EIGRP 679 > > Paths from BB2 were external to EIGRP 679 > > > > At first I created my ACL and then used a lower distance (85 I think it > was) for routes from BB1, and did the same for routes from BB2. > > This worked for the routes from BB1 which changed from 90 to 85 > > This did not work for routes from BB2. The distance stayed at 170. > > > > I ended up using an offset list for routes from BB2, and all was well. > > > > I wondered afterward though, is it possible to change the AD for only > particular EIGRP external routes and not other external EIGRP routes? > Unfortunately, I was doing the graded labs so I couldn’t replicate > afterward. > > > > Thanks for the help! > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > -- Bryan Bartik CCIE #23707 (R&S), CCNP Sr. Support Engineer - IPexpert, Inc. URL: http://www.IPexpert.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
