I tried virt for disk and network. This still hangs. I tried AHCI which also
hangs. As you mentioned vmware workstation is now free, I will try that next.
None of my linux VirtualBox vms had trouble.
Console log of AHCI disk and vert network hanging. This is with openbox and a
serial console telneted in to:
cannot open cd0a:/etc/random.seed: No such file or directory
booting cd0a:/7.5/amd64/bsd.rd: 4076463+1688576+3891240+0+70860
[109+464016+317541]=0xaa40e8
entry point at 0xffffffff81001000
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2024 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 7.5 (RAMDISK_CD) #76: Wed Mar 20 15:53:54 MDT 2024
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 4278124544 (4079MB)
avail mem = 4144271360 (3952MB)
random: good seed from bootblocks
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe1000 (10 entries)
bios0: vendor innotek GmbH version "VirtualBox" date 12/01/2006
bios0: innotek GmbH VirtualBox
acpi0 at bios0: ACPI 4.0
acpi0: tables DSDT FACP APIC SSDT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: 13th Gen Intel(R) Core(TM) i7-13620H, 2901.79 MHz, 06-ba-02, patch
ffffffff
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,SSSE3,CX16,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,ABM,3DNOWP,ITSC,FSGSBASE,BMI1,BMI2,INVPCID,RDSEED,CLFLUSHOPT,MD_CLEAR,L1DF,ARAT,IBRS_ALL,RSBA,MDS_NO,IF_PSCHANGE,TAA_NO,SBDR_SSDP_N,FBSDP_NO,PSDP_NO
cpu0: 48KB 64b/line 12-way D-cache, 32KB 64b/line 8-way I-cache, 1MB 64b/line
10-way L2 cache, 24MB 64b/line 12-way L3 cache
cpu0: apic clock running at 999MHz
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins, remapped
acpiprt0 at acpi0: bus 0 (PCI0)
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
com0 at acpi0 SRL0 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
com0: console
"PNP0C0A" at acpi0 not configured
"ACPI0003" at acpi0 not configured
acpicpu at acpi0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
"Intel 82371SB ISA" rev 0x00 at pci0 dev 1 function 0 not configured
vga1 at pci0 dev 2 function 0 "VMware SVGA II" rev 0x00
vga1: aperture needed
wsdisplay at vga1 not configured
virtio0 at pci0 dev 3 function 0 "Qumranet Virtio Network" rev 0x00
vio0 at virtio0: address 08:00:27:95:13:67
virtio0: apic 4 int 19
"InnoTek Guest Service" rev 0x00 at pci0 dev 4 function 0 not configured
"Intel 82801AA AC97" rev 0x01 at pci0 dev 5 function 0 not configured
ohci0 at pci0 dev 6 function 0 "Apple Intrepid USB" rev 0x00: apic 4 int 22,
version 1.0
"Intel 82371AB Power" rev 0x08 at pci0 dev 7 function 0 not configured
ehci0 at pci0 dev 11 function 0 "Intel 82801FB USB" rev 0x00: apic 4 int 19
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
ahci0 at pci0 dev 13 function 0 "Intel 82801HBM AHCI" rev 0x02: apic 4 int 21,
AHCI 1.1
ahci0: device on port 0 didn't come ready, TFD: 0x171<ERR>
ahci0: port 0: 3.0Gb/s
ahci0: device on port 1 didn't come ready, TFD: 0x131<ERR>
ahci0: port 1: 3.0Gb/s
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, VBOX HARDDISK, 1.0>
t10.ATA_VBOX_HARDDISK_VBe5a94db8-0b6a30e9_
sd0: 16384MB, 512 bytes/sector, 33554432 sectors
cd0 at scsibus0 targ 1 lun 0: <VBOX, CD-ROM, 1.0> removable
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Apple OHCI root hub" rev 1.00/1.00
addr 1
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0 mux 1
softraid0 at root
scsibus1 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
WARNING: CHECK AND RESET THE DATE!
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
Welcome to the OpenBSD/amd64 7.5 installation program.
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell? i
i
At any prompt except password prompts you can escape to a shell by
typing '!'. Default answers are shown in []'s and are selected by
pressing RETURN. You can exit this program at any time by pressing
Control-C, but this can leave your system in an inconsistent state.
Terminal type? [vt220] System hostname? (short form, e.g. 'foo')
A response is required.
System hostname? (short form, e.g. 'foo') A response is required.
System hostname? (short form, e.g. 'foo') obsd75.awohl.com
obsd75.awohl.com
Available network interfaces are: vio0 vlan0.
Network interface to configure? (name, lladdr, '?', or 'done') [vio0] IPv4
address for vio0? (or 'autoconf' or 'none') [autoconf]
----- Original message -----
From: Stefan Fritsch <s...@openbsd.org>
To: Aaron Wohl <w...@awohl.com>
Cc: bugs@openbsd.org
Subject: Re: osbd 7.5 7.4 under virtualbox
Date: Wednesday, September 04, 2024 3:38 PM
Hi Aaron,
On Wed, 4 Sep 2024, Aaron Wohl wrote:
> I did try virtio but I don't recall the result. I will retry and let
> you know. I added a serial console a VirtualBox machine and switched to
> it at boot>. Below is a log you asked for of the hang I get with an
> e1000, 4GB of ram, 100gb IDE disk 4 processors.
Thanks. Nothing particularily weird stands out and I am not familiar with
virtualbox. But you should try not using IDE for hard disk and cdrom. Ahci
or virtio are preferable. Or maybe nvme.
Cheers,
Stefan
>
>
> >> OpenBSD/amd64 CDBOOT 3.65
> boot>
> cannot open cd0a:/etc/random.seed: No such file or directory
> booting cd0a:/7.5/amd64/bsd.rd: 4076463+1688576+3891240+0+708608
> [109+464016+317541]=0xaa40e8
> entry point at 0xffffffff81001000
> Copyright (c) 1982, 1986, 1989, 1991, 1993
> The Regents of the University of California. All rights reserved.
> Copyright (c) 1995-2024 OpenBSD. All rights reserved. https://www.OpenBSD.org
>
> OpenBSD 7.5 (RAMDISK_CD) #76: Wed Mar 20 15:53:54 MDT 2024
> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
> real mem = 4278124544 (4079MB)
> avail mem = 4144271360 (3952MB)
> random: good seed from bootblocks
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe1000 (10 entries)
> bios0: vendor innotek GmbH version "VirtualBox" date 12/01/2006
> bios0: innotek GmbH VirtualBox
> acpi0 at bios0: ACPI 4.0
> acpi0: tables DSDT FACP APIC SSDT
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: 13th Gen Intel(R) Core(TM) i7-13620H, 2925.09 MHz, 06-ba-02, patch
> ffffffff
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,SSSE3,CX16,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,ABM,3DNOWP,ITSC,FSGSBASE,BMI1,BMI2,INVPCID,RDSEED,CLFLUSHOPT,MD_CLEAR,L1DF,ARAT,IBRS_ALL,RSBA,MDS_NO,IF_PSCHANGE,TAA_NO,SBDR_SSDP_N,FBSDP_NO,PSDP_NO
> cpu0: 48KB 64b/line 12-way D-cache, 32KB 64b/line 8-way I-cache, 1MB 64b/line
> 10-way L2 cache, 24MB 64b/line 12-way L3 cache
> cpu0: apic clock running at 1000MHz
> cpu at mainbus0: not configured
> cpu at mainbus0: not configured
> cpu at mainbus0: not configured
> ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins, remapped
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
> com0 at acpi0 SRL0 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
> com0: console
> "PNP0C0A" at acpi0 not configured
> "ACPI0003" at acpi0 not configured
> acpicpu at acpi0 not configured
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
> "Intel 82371SB ISA" rev 0x00 at pci0 dev 1 function 0 not configured
> pciide0 at pci0 dev 1 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0
> configured to compatibility, channel 1 configured to compatibility
> wd0 at pciide0 channel 0 drive 0: <VBOX HARDDISK>
> wd0: 128-sector PIO, LBA, 16384MB, 33554432 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <VBOX, CD-ROM, 1.0> removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> vga1 at pci0 dev 2 function 0 "VMware SVGA II" rev 0x00
> vga1: aperture needed
> wsdisplay at vga1 not configured
> em0 at pci0 dev 3 function 0 "Intel 82540EM" rev 0x02: apic 4 int 19, address
> 08:00:27:95:13:67
> "InnoTek Guest Service" rev 0x00 at pci0 dev 4 function 0 not configured
> "Intel 82801AA AC97" rev 0x01 at pci0 dev 5 function 0 not configured
> ohci0 at pci0 dev 6 function 0 "Apple Intrepid USB" rev 0x00: apic 4 int 22,
> version 1.0
> "Intel 82371AB Power" rev 0x08 at pci0 dev 7 function 0 not configured
> ehci0 at pci0 dev 11 function 0 "Intel 82801FB USB" rev 0x00: apic 4 int 19
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
> addr 1
> usb1 at ohci0: USB revision 1.0
> uhub1 at usb1 configuration 1 interface 0 "Apple OHCI root hub" rev 1.00/1.00
> addr 1
> isa0 at mainbus0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0 mux 1
> softraid0 at root
> scsibus1 at softraid0: 256 targets
> root on rd0a swap on rd0b dump on rd0b
> WARNING: CHECK AND RESET THE DATE!
> erase ^?, werase ^W, kill ^U, intr ^C, status ^T
>
> Welcome to the OpenBSD/amd64 7.5 installation program.
> (I)nstall, (U)pgrade, (A)utoinstall or (S)hell?
>
> At any prompt except password prompts you can escape to a shell by
> typing '!'. Default answers are shown in []'s and are selected by
> pressing RETURN. You can exit this program at any time by pressing
> Control-C, but this can leave your system in an inconsistent state.
>
> Terminal type? [vt220] System hostname? (short form, e.g. 'foo')
>
>
> A response is required.
> System hostname? (short form, e.g. 'foo') A response is required.
> System hostname? (short form, e.g. 'foo') obsd75.awohl.com
> obsd75.awohl.com
>
>
> Available network interfaces are: em0 vlan0.
> Network interface to configure? (name, lladdr, '?', or 'done') [em0] IPv4
> address for em0? (or 'autoconf' or 'none') [autoconf]
>
>
>
> ----- Original message -----
> From: Stefan Fritsch <s...@openbsd.org>
> To: Aaron Wohl <w...@awohl.com>
> Cc: bugs@openbsd.org
> Subject: Re: osbd 7.5 7.4 under virtualbox
> Date: Wednesday, September 04, 2024 8:36 AM
>
> Hi,
>
> On Wed, 4 Sep 2024, Aaron Wohl wrote:
>
> > I have used openbsd for over a decade on real hardware and virtual
> > machines in vmware and virtual box. This is the first time I have run
> > into hangs like this.
> >
> > It often hangs during boot from install_75.iso or cd74.iso at the V4 IP
> > after picking autoconf for em0. If I change the hardware network
> > adapter from m1000 desktop to m1000 server that part works and it gets
> > further along.
> >
> > With IDE set for the disk it sometimes gets incredibly slow trying to do
> > any disk access or setup the drivers for IDE. It can take 15min to get
> > past the IDE driver lines in the boot. Switching the disk to SCSI in
> > the VirtualBox config works better. But still hangs later on.
>
> Have you tried virtio network instead of e1000? Also, it would be helpful
> if you could somehow post the full console output from the boot, either by
> redirecting it to a serial console, or if it does not hang all the time by
> doing dmesg via ssh.
>
> Cheers,
> Stefan
>
