On Thu, Jul 04, 2019 at 09:13:22AM +0200, Raimo Niskanen wrote: > I just freed a Lenovo U350 IdeaPad from Windows 10 Home and installed > OpenBSD 6.5 on it (the installer gets better and better - now I installed > the sets via https and cdn.openbsd.org; really slick!), and when starting X > it panicked. > > During the first installation I selected to start xenodm and at firstboot > it panicked right after firmware installation during kernel relinking. > Both firmware files and kernel appeared to be damaged after reboot and fsck. > > So this is after a second installation where I selected to not start > xenodm, which allowed me to update firmware, syspatch reboot again > and wait for quiescent filesystem before starting xenodm, and then; > it panicked. > > I hope it is simply not that machdep.allowaperture=0; if that was needed > Xorg should just refuse to start, right?
It was not. With machdep.allowaperture=0 I get the same panic. Suggestion, anyone? / Raimo Niskanen > > Here are screenshots from the panic, ddb> trace and ps output: > > https://mailfence.com/pub/docs/raimo_niskanen/web/panic.jpg > https://mailfence.com/pub/docs/raimo_niskanen/web/trace-0.jpg > https://mailfence.com/pub/docs/raimo_niskanen/web/trace-1.jpg > https://mailfence.com/pub/docs/raimo_niskanen/web/ps-1.jpg > https://mailfence.com/pub/docs/raimo_niskanen/web/ps-2.jpg > https://mailfence.com/pub/docs/raimo_niskanen/web/ps-3.jpg > > And here is the dmesg: > > OpenBSD 6.5 (GENERIC.MP) #1: Mon May 27 18:27:59 CEST 2019 > > r...@syspatch-65-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 4105912320 (3915MB) > avail mem = 3971837952 (3787MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe3810 (24 entries) > bios0: vendor LENOVO version "1CCN24WW" date 11/10/2009 > bios0: LENOVO IdeaPad U350 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP HPET MCFG APIC BOOT SLIC SSDT SSDT SSDT > acpi0: wakeup devices P0P2(S4) P0P1(S4) USB0(S3) USB1(S3) USB2(S3) USBR(S3) > EHC1(S3) USB3(S3) USB4(S3) USB5(S3) EHC2(S3) HDEF(S4) PXSX(S4) RP01(S4) > PXSX(S4) RP02(S4) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpimcfg0 at acpi0 > acpimcfg0: addr 0xe0000000, bus 0-255 > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Genuine Intel(R) CPU U7300 @ 1.30GHz, 1296.97 MHz, 06-17-0a > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN > cpu0: 3MB 64b/line 8-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges > cpu0: apic clock running at 247MHz > cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2.1.3, IBE > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Genuine Intel(R) CPU U7300 @ 1.30GHz, 1607.97 MHz, 06-17-0a > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN > cpu1: 3MB 64b/line 8-way L2 cache > cpu1: smt 0, core 1, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (P0P2) > acpiprt2 at acpi0: bus 9 (P0P1) > acpiprt3 at acpi0: bus 2 (RP01) > acpiprt4 at acpi0: bus 3 (RP02) > acpiprt5 at acpi0: bus 8 (RP06) > acpiec0 at acpi0 > acpicpu0 at acpi0: !C2(100@57 mwait.3@0x30), C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: !C2(100@57 mwait.3@0x30), C1(1000@1 mwait.1), PSS > acpitz0 at acpi0: critical temperature is 98 degC > acpipci0 at acpi0 PCI0: _OSC failed > acpicmos0 at acpi0 > "SYN1031" at acpi0 not configured > "VPC2004" at acpi0 not configured > acpiac0 at acpi0: AC unit online > acpibat0 at acpi0: BAT1 model "L901" serial type LION oem "CPT-A28" > acpibtn0 at acpi0: LID_ > acpibtn1 at acpi0: PWRB > acpibtn2 at acpi0: SLPB > "PNP0C14" at acpi0 not configured > acpials0 at acpi0: ALSD > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD03 > cpu0: Enhanced SpeedStep 1296 MHz: speeds: 1300, 1200, 800 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07 > inteldrm0 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07 > drm0 at inteldrm0 > intagp0 at inteldrm0 > agp0 at intagp0: aperture at 0xd0000000, size 0x10000000 > inteldrm0: msi > inteldrm0: 1366x768, 32bpp > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 16 > uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 21 > uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 19 > ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 19 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 > addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi > azalia0: codecs: Conexant/0x5066, Intel/0x2802, using Conexant/0x5066 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi > pci1 at ppb0 bus 2 > ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi > pci2 at ppb1 bus 3 > iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: msi, MIMO > 1T2R, MoW, address 00:24:d6:00:bb:7a > ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: msi > pci3 at ppb2 bus 5 > ppb3 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: msi > pci4 at ppb3 bus 6 > ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: msi > pci5 at ppb4 bus 7 > ppb5 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x03: msi > pci6 at ppb5 bus 8 > bge0 at pci6 dev 0 function 0 "Broadcom BCM57780" rev 0x01, BCM57780 A1 > (0x57780001): msi, address 00:26:9e:6f:23:48 > brgphy0 at bge0 phy 1: BCM57780 10/100/1000baseT PHY, rev. 1 > uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 23 > uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 19 > uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 18 > ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 23 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 > addr 1 > ppb6 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93 > pci7 at ppb6 bus 9 > pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03 > ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2 > ahci0: port 0: 3.0Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD3200BEVT-2, 11.0> SCSI3 0/direct > fixed naa.50014ee0ac4fd90e > sd0: 305245MB, 512 bytes/sector, 625142448 sectors > ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 2 int 19 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500 SO-DIMM > spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-8500 SO-DIMM > usb2 at uhci0: USB revision 1.0 > uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 > addr 1 > usb3 at uhci1: USB revision 1.0 > uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 > addr 1 > usb4 at uhci2: USB revision 1.0 > uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 > addr 1 > usb5 at uhci3: USB revision 1.0 > uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 > addr 1 > usb6 at uhci4: USB revision 1.0 > uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 > addr 1 > usb7 at uhci5: USB revision 1.0 > uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 > addr 1 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > wsmouse0 at pms0 mux 0 > pms0: Synaptics touchpad, firmware 7.2, 0x1c0b1 0xa40000 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > vmm0 at mainbus0: VMX (using slow L1TF mitigation) > uvideo0 at uhub0 port 5 configuration 1 interface 0 "BISON Corporation Lenovo > EasyCamera" rev 2.00/3.17 addr 2 > video0 at uvideo0 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed > sd1: 281599MB, 512 bytes/sector, 576716655 sectors > root on sd1a (ade017f291cda44d.a) swap on sd1b dump on sd1b > -- > > / Raimo Niskanen, Erlang/OTP, Ericsson AB -- / Raimo Niskanen, Erlang/OTP, Ericsson AB
