I just freed a Lenovo U350 IdeaPad from Windows 10 Home and installed OpenBSD 6.5 on it (the installer gets better and better - now I installed the sets via https and cdn.openbsd.org; really slick!), and when starting X it panicked.
During the first installation I selected to start xenodm and at firstboot it panicked right after firmware installation during kernel relinking. Both firmware files and kernel appeared to be damaged after reboot and fsck. So this is after a second installation where I selected to not start xenodm, which allowed me to update firmware, syspatch reboot again and wait for quiescent filesystem before starting xenodm, and then; it panicked. I hope it is simply not that machdep.allowaperture=0; if that was needed Xorg should just refuse to start, right? Here are screenshots from the panic, ddb> trace and ps output: https://mailfence.com/pub/docs/raimo_niskanen/web/panic.jpg https://mailfence.com/pub/docs/raimo_niskanen/web/trace-0.jpg https://mailfence.com/pub/docs/raimo_niskanen/web/trace-1.jpg https://mailfence.com/pub/docs/raimo_niskanen/web/ps-1.jpg https://mailfence.com/pub/docs/raimo_niskanen/web/ps-2.jpg https://mailfence.com/pub/docs/raimo_niskanen/web/ps-3.jpg And here is the dmesg: OpenBSD 6.5 (GENERIC.MP) #1: Mon May 27 18:27:59 CEST 2019 r...@syspatch-65-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 4105912320 (3915MB) avail mem = 3971837952 (3787MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe3810 (24 entries) bios0: vendor LENOVO version "1CCN24WW" date 11/10/2009 bios0: LENOVO IdeaPad U350 acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP HPET MCFG APIC BOOT SLIC SSDT SSDT SSDT acpi0: wakeup devices P0P2(S4) P0P1(S4) USB0(S3) USB1(S3) USB2(S3) USBR(S3) EHC1(S3) USB3(S3) USB4(S3) USB5(S3) EHC2(S3) HDEF(S4) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimcfg0 at acpi0 acpimcfg0: addr 0xe0000000, bus 0-255 acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Genuine Intel(R) CPU U7300 @ 1.30GHz, 1296.97 MHz, 06-17-0a cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN cpu0: 3MB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges cpu0: apic clock running at 247MHz cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2.1.3, IBE cpu1 at mainbus0: apid 1 (application processor) cpu1: Genuine Intel(R) CPU U7300 @ 1.30GHz, 1607.97 MHz, 06-17-0a cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN cpu1: 3MB 64b/line 8-way L2 cache cpu1: smt 0, core 1, package 0 ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (P0P2) acpiprt2 at acpi0: bus 9 (P0P1) acpiprt3 at acpi0: bus 2 (RP01) acpiprt4 at acpi0: bus 3 (RP02) acpiprt5 at acpi0: bus 8 (RP06) acpiec0 at acpi0 acpicpu0 at acpi0: !C2(100@57 mwait.3@0x30), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: !C2(100@57 mwait.3@0x30), C1(1000@1 mwait.1), PSS acpitz0 at acpi0: critical temperature is 98 degC acpipci0 at acpi0 PCI0: _OSC failed acpicmos0 at acpi0 "SYN1031" at acpi0 not configured "VPC2004" at acpi0 not configured acpiac0 at acpi0: AC unit online acpibat0 at acpi0: BAT1 model "L901" serial type LION oem "CPT-A28" acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: PWRB acpibtn2 at acpi0: SLPB "PNP0C14" at acpi0 not configured acpials0 at acpi0: ALSD acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: DD03 cpu0: Enhanced SpeedStep 1296 MHz: speeds: 1300, 1200, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07 inteldrm0 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07 drm0 at inteldrm0 intagp0 at inteldrm0 agp0 at intagp0: aperture at 0xd0000000, size 0x10000000 inteldrm0: msi inteldrm0: 1366x768, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 16 uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 21 uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 19 ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 19 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi azalia0: codecs: Conexant/0x5066, Intel/0x2802, using Conexant/0x5066 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi pci1 at ppb0 bus 2 ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi pci2 at ppb1 bus 3 iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: msi, MIMO 1T2R, MoW, address 00:24:d6:00:bb:7a ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: msi pci3 at ppb2 bus 5 ppb3 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: msi pci4 at ppb3 bus 6 ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: msi pci5 at ppb4 bus 7 ppb5 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x03: msi pci6 at ppb5 bus 8 bge0 at pci6 dev 0 function 0 "Broadcom BCM57780" rev 0x01, BCM57780 A1 (0x57780001): msi, address 00:26:9e:6f:23:48 brgphy0 at bge0 phy 1: BCM57780 10/100/1000baseT PHY, rev. 1 uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 23 uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 19 uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 18 ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb6 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93 pci7 at ppb6 bus 9 pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03 ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2 ahci0: port 0: 3.0Gb/s scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD3200BEVT-2, 11.0> SCSI3 0/direct fixed naa.50014ee0ac4fd90e sd0: 305245MB, 512 bytes/sector, 625142448 sectors ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 2 int 19 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500 SO-DIMM spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-8500 SO-DIMM usb2 at uhci0: USB revision 1.0 uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb7 at uhci5: USB revision 1.0 uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) wsmouse0 at pms0 mux 0 pms0: Synaptics touchpad, firmware 7.2, 0x1c0b1 0xa40000 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 vmm0 at mainbus0: VMX (using slow L1TF mitigation) uvideo0 at uhub0 port 5 configuration 1 interface 0 "BISON Corporation Lenovo EasyCamera" rev 2.00/3.17 addr 2 video0 at uvideo0 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed sd1: 281599MB, 512 bytes/sector, 576716655 sectors root on sd1a (ade017f291cda44d.a) swap on sd1b dump on sd1b -- / Raimo Niskanen, Erlang/OTP, Ericsson AB
