---------- Forwarded message ---------- From: Stuart Henderson <s...@spacehopper.org> Date: Thu, 4 Jul 2019 11:36:22 +0100 Subject: Re: umsm: sparc64 To: Kihaguru Gathura <pqscr...@gmail.com> Cc: m...@openbsd.org
On 2019/07/04 12:52, Kihaguru Gathura wrote: > Hereby attached the new multiprocessor kernel with umsm working ok. > > The error message appears for each connection made to cuaU. This might > potentially populate dmesg logs over time. > > Error message: > umsm0: this device is not using CDC notify message in intr pipe. > Please send your dmesg to <bugs@openbsd.org>, thanks. > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0: Please send your dmesg to bugs@openbsd.org :-) > Kihaguru. > > www# dmesg > console is /pci@83,4000/isa@7/su@0,3f8 > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2019 OpenBSD. All rights reserved. https://www.OpenBSD.org > > OpenBSD 6.5 (WWW.MP) #0: Thu Jul 4 08:43:43 EAT 2019 > kihag...@www.datastore.ke:/usr/src/sys/arch/sparc64/compile/WWW.MP > real mem = 17179869184 (16384MB) > avail mem = 16862576640 (16081MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root: Fujitsu Siemens PRIMEPOWER250 2x SPARC64 V > cpu0 at mainbus0: FJSV,SPARC64-V (rev 5.1) @ 1979 MHz > cpu0: physical 128K instruction (64 b/l), 128K data (64 b/l), 3072K > external (64 b/l) > cpu1 at mainbus0: FJSV,SPARC64-V (rev 5.1) @ 1979 MHz > cpu1: physical 128K instruction (64 b/l), 128K data (64 b/l), 3072K > external (64 b/l) > psycho0 at mainbus0 addr 0xfffb2000: SUNW,psycho, impl 0, version 4, ign c0 > psycho0: bus range 0-0, PCI bus 0 > psycho0: dvma map fe000000-ffffffff, STC0 enabled > pci0 at psycho0 > ebus0 at pci0 dev 1 function 0 "Sun PCIO EBus2" rev 0x01 > "FJSV,scfc" at ebus0 addr 210000-210085, 220000-220031, 260000-260001, > 270000-28ffff ivec 0x23 not configured > "FJSV,flashprom" at ebus0 addr 0-3fffff not configured > clock1 at ebus0 addr 250000-251fff: mk48t59 > "FJSV,panel" at ebus0 addr 210011-210011 ivec 0x25 not configured > ebus1 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00 > com0 at ebus1 addr 3f8-3ff ivec 0x2b: ns16550a, 16 byte fifo > com0: console > com1 at ebus1 addr 2e8-2ef ivec 0x2b: ns16550a, 16 byte fifo > hme0 at pci0 dev 1 function 1 "Sun HME" rev 0x01: ivec 0xe1, address > 00:0b:5d:f3:a7:5c > nsphyter0 at hme0 phy 1: DP83843 10/100 PHY, rev. 0 > mpi0 at pci0 dev 2 function 1 "Symbios Logic 53c1030" rev 0x07: ivec 0xe0 > mpi0: 0, firmware 1.0.12.0 > scsibus1 at mpi0: 16 targets, initiator 7 > sym0 at scsibus1 targ 0 lun 0: <FUJITSU, MAT3073N SUN72G, 0602> SCSI2 > 0/direct fixed serial.FUJITSU_MAT3073N_SUN72G_000506B00RAR_AAN0P5200RAR > sd0 at scsibus0 targ 0 lun 0: <FUJITSU, MAT3073N SUN72G, 0602> SCSI2 > 0/direct fixed serial.FUJITSU_MAT3073N_SUN72G_000506B00RAR_AAN0P5200RAR > sd0: 70007MB, 512 bytes/sector, 143374738 sectors > sym1 at scsibus1 targ 1 lun 0: <FUJITSU, MAT3073N SUN72G, 0602> SCSI2 > 0/direct fixed serial.FUJITSU_MAT3073N_SUN72G_000506B00SSL_AAN0P5200SSL > sd1 at scsibus0 targ 1 lun 0: <FUJITSU, MAT3073N SUN72G, 0602> SCSI2 > 0/direct fixed serial.FUJITSU_MAT3073N_SUN72G_000506B00SSL_AAN0P5200SSL > sd1: 70007MB, 512 bytes/sector, 143374738 sectors > mpi0: target 0 Sync at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1 > mpi0: target 1 Sync at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1 > pciide0 at pci0 dev 13 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc4: > DMA, channel 0 configured to native-PCI, channel 1 configured to > native-PCI > pciide0: using ivec 0xe4 for native-PCI interrupt > atapiscsi0 at pciide0 channel 0 drive 0 > scsibus2 at atapiscsi0: 2 targets > cd0 at scsibus2 targ 0 lun 0: <MATSHITA, DVD-ROM SR-8178, PY28> ATAPI > 5/cdrom removable > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > pciide0: channel 1 disabled (no drives) > ohci0 at pci0 dev 10 function 0 "Acer Labs M5237 USB" rev 0x03: ivec > 0xe9, version 1.0, legacy support > usb0 at ohci0: USB revision 1.0 > uhub0 at usb0 configuration 1 interface 0 "Acer Labs OHCI root hub" > rev 1.00/1.00 addr 1 > psycho1 at mainbus0 addr 0xfff9e000: SUNW,psycho, impl 0, version 4, ign c0 > psycho1: bus range 128-128, PCI bus 128 > psycho1: dvma map fe000000-ffffffff, STC0 enabled, STC1 enabled > pci1 at psycho1 > bge0 at pci1 dev 1 function 0 "Fujitsu PRIMEPOWER250/450 LAN" rev > 0x02, BCM5702/5703 A2 (0x1002): ivec 0xc0, address 00:0b:5d:f4:27:5c > brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2 > "counter-timer" at mainbus0 addr 0xfff8bc00 not configured > umsm0 at uhub0 port 1 configuration 1 interface 0 "HUAWEI HUAWEI > Mobile" rev 2.00/1.02 addr 2 > ucom0 at umsm0 > umsm1 at uhub0 port 1 configuration 1 interface 1 "HUAWEI HUAWEI > Mobile" rev 2.00/1.02 addr 2 > ucom1 at umsm1 > umsm2 at uhub0 port 1 configuration 1 interface 2 "HUAWEI HUAWEI > Mobile" rev 2.00/1.02 addr 2 > ucom2 at umsm2 > umass0 at uhub0 port 1 configuration 1 interface 3 "HUAWEI HUAWEI > Mobile" rev 2.00/1.02 addr 2 > umass0: using SCSI over Bulk-Only > scsibus3 at umass0: 2 targets, initiator 0 > cd1 at scsibus3 targ 1 lun 0: <HUAWEI, Mass Storage, 2.31> SCSI2 > 5/cdrom removable > umass1 at uhub0 port 1 configuration 1 interface 4 "HUAWEI HUAWEI > Mobile" rev 2.00/1.02 addr 2 > umass1: using SCSI over Bulk-Only > scsibus4 at umass1: 2 targets, initiator 0 > sd2 at scsibus4 targ 1 lun 0: <HUAWEI, SD Storage, 2.31> SCSI2 > 0/direct removable > vscsi0 at root > scsibus5 at vscsi0: 256 targets > softraid0 at root > scsibus6bootpath: /pci@83,4000/FJSV,ulsa@2,1/disk@0,0 > root on sd0a (e489192361503865.a) swap on sd0b dump on sd0b > umsm0: this device is not using CDC notify message in intr pipe. > Please send your dmesg to <bugs@openbsd.org>, thanks. > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 > www# > > > > > On 7/3/19, Kihaguru Gathura <pqscr...@gmail.com> wrote: > >> Try adding umsm to /sys/arch/sparc64/conf/GENERIC and build a new kernel. > >> If it works ok, report back, maybe we can add it to the standard kernel. > > > > Have added umsm to GENERIC and built a new kernel => modem works as > > desired at cuaU0 -s 115200. > > > > Next will build a multiprocessor kernel using GENERIC.MP and continue > > testing and using the modem. > > > > However error messages noted at dmesg (umsm0: this device is not using > > CDC notify message in intr pipe.) > > > > Thank you, > > > > Kihaguru. > > > > +++++++++++++++++++++++++++++++++++++++++++++++++ > > console is /pci@83,4000/isa@7/su@0,3f8 > > Copyright (c) 1982, 1986, 1989, 1991, 1993 > > The Regents of the University of California. All rights reserved. > > Copyright (c) 1995-2019 OpenBSD. All rights reserved. > > https://www.OpenBSD.org > > > > OpenBSD 6.5 (WWW) #0: Wed Jul 3 13:36:10 EAT 2019 > > r...@www.datastore.ke:/usr/src/sys/arch/sparc64/compile/WWW > > real mem = 17179869184 (16384MB) > > avail mem = 16862699520 (16081MB) > > mpath0 at root > > scsibus0 at mpath0: 256 targets > > mainbus0 at root: Fujitsu Siemens PRIMEPOWER250 2x SPARC64 V > > cpu0 at mainbus0: FJSV,SPARC64-V (rev 5.1) @ 1979 MHz > > cpu0: physical 128K instruction (64 b/l), 128K data (64 b/l), 3072K > > external (64 b/l) > > "FJSV,SPARC64-V" at mainbus0 not configured > > psycho0 at mainbus0 addr 0xfffb2000: SUNW,psycho, impl 0, version 4, ign c0 > > psycho0: bus range 0-0, PCI bus 0 > > psycho0: dvma map fe000000-ffffffff, STC0 enabled > > pci0 at psycho0 > > ebus0 at pci0 dev 1 function 0 "Sun PCIO EBus2" rev 0x01 > > "FJSV,scfc" at ebus0 addr 210000-210085, 220000-220031, 260000-260001, > > 270000-28ffff ivec 0x23 not configured > > "FJSV,flashprom" at ebus0 addr 0-3fffff not configured > > clock1 at ebus0 addr 250000-251fff: mk48t59 > > "FJSV,panel" at ebus0 addr 210011-210011 ivec 0x25 not configured > > ebus1 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00 > > com0 at ebus1 addr 3f8-3ff ivec 0x2b: ns16550a, 16 byte fifo > > com0: console > > com1 at ebus1 addr 2e8-2ef ivec 0x2b: ns16550a, 16 byte fifo > > hme0 at pci0 dev 1 function 1 "Sun HME" rev 0x01: ivec 0xe1, address > > 00:0b:5d:f3:a7:5c > > nsphyter0 at hme0 phy 1: DP83843 10/100 PHY, rev. 0 > > mpi0 at pci0 dev 2 function 1 "Symbios Logic 53c1030" rev 0x07: ivec 0xe0 > > mpi0: 0, firmware 1.0.12.0 > > scsibus1 at mpi0: 16 targets, initiator 7 > > sym0 at scsibus1 targ 0 lun 0: <FUJITSU, MAT3073N SUN72G, 0602> SCSI2 > > 0/direct fixed serial.FUJITSU_MAT3073N_SUN72G_000506B00RAR_AAN0P5200RAR > > sd0 at scsibus0 targ 0 lun 0: <FUJITSU, MAT3073N SUN72G, 0602> SCSI2 > > 0/direct fixed serial.FUJITSU_MAT3073N_SUN72G_000506B00RAR_AAN0P5200RAR > > sd0: 70007MB, 512 bytes/sector, 143374738 sectors > > sym1 at scsibus1 targ 1 lun 0: <FUJITSU, MAT3073N SUN72G, 0602> SCSI2 > > 0/direct fixed serial.FUJITSU_MAT3073N_SUN72G_000506B00SSL_AAN0P5200SSL > > sd1 at scsibus0 targ 1 lun 0: <FUJITSU, MAT3073N SUN72G, 0602> SCSI2 > > 0/direct fixed serial.FUJITSU_MAT3073N_SUN72G_000506B00SSL_AAN0P5200SSL > > sd1: 70007MB, 512 bytes/sector, 143374738 sectors > > mpi0: target 0 Sync at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1 > > mpi0: target 1 Sync at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1 > > pciide0 at pci0 dev 13 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc4: > > DMA, channel 0 configured to native-PCI, channel 1 configured to > > native-PCI > > pciide0: using ivec 0xe4 for native-PCI interrupt > > atapiscsi0 at pciide0 channel 0 drive 0 > > scsibus2 at atapiscsi0: 2 targets > > cd0 at scsibus2 targ 0 lun 0: <MATSHITA, DVD-ROM SR-8178, PY28> ATAPI > > 5/cdrom removable > > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > > pciide0: channel 1 disabled (no drives) > > ohci0 at pci0 dev 10 function 0 "Acer Labs M5237 USB" rev 0x03: ivec > > 0xe9, version 1.0, legacy support > > usb0 at ohci0: USB revision 1.0 > > uhub0 at usb0 configuration 1 interface 0 "Acer Labs OHCI root hub" > > rev 1.00/1.00 addr 1 > > psycbrgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2 > > timer0 at mainbus0 addr 0xfff8bc00 ivec 0xec, 0xed > > umsm0 at uhub0 port 1 configuration 1 interface 0 "HUAWEI HUAWEI > > Mobile" rev 2.00/1.02 addr 2 > > ucom0 at umsm0 > > umsm1 at uhub0 port 1 configuration 1 interface 1 "HUAWEI HUAWEI > > Mobile" rev 2.00/1.02 addr 2 > > ucom1 at umsm1 > > umsm2 at uhub0 port 1 configuration 1 interface 2 "HUAWEI HUAWEI > > Mobile" rev 2.00/1.02 addr 2 > > ucom2 at umsm2 > > umass0 at uhub0 port 1 configuration 1 interface 3 "HUAWEI HUAWEI > > Mobile" rev 2.00/1.02 addr 2 > > umass0: using SCSI over Bulk-Only > > scsibus3 at umass0: 2 targets, initiator 0 > > cd1 at scsibus3 targ 1 lun 0: <HUAWEI, Mass Storage, 2.31> SCSI2 > > 5/cdrom removable > > umass1 at uhub0 port 1 configuration 1 interface 4 "HUAWEI HUAWEI > > Mobile" rev 2.00/1.02 addr 2 > > umass1: using SCSI over Bulk-Only > > scsibus4 at umass1: 2 targets, initiator 0 > > sd2 at scsibus4 targ 1 lun 0: <HUAWEI, SD Storage, 2.31> SCSI2 > > 0/direct removable > > vscsi0 at root > > scsibus5 at vscsi0: 256 targets > > softraid0 at root > > scsibus6 at softraid0: 256 targets > > bootpath: /pci@83,4000/FJSV,ulsa@2,1/disk@0,0 > > root on sd0a (e489192361503865.a) swap on sd0b dump on sd0b > > umsm0: this device is not using CDC notify message in intr pipe. > > Please send your dmesg to <bugs@openbsd.org>, thanks. > > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 > > umsm0: this device is not using CDC notify message in intr pipe. > > Please send your dmesg to <bugs@openbsd.org>, thanks. > > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 > > umsm0: this device is not using CDC notify message in intr pipe. > > Please send your dmesg to <bugs@openbsd.org>, thanks. > > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 > > umsm0: this device is not using CDC notify message in intr pipe. > > Please send your dmesg to <bugs@openbsd.org>, thanks. > > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 > > umsm0: this device is not using CDC notify message in intr pipe. > > Please send your dmesg to <bugs@openbsd.org>, thanks. > > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 > > umsm0: this device is not using CDC notify message in intr pipe. > > Please send your dmesg to <bugs@openbsd.org>, thanks. > > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 > > umsm0: this device is not using CDC notify message in intr pipe. > > Please send your dmesg to <bugs@openbsd.org>, thanks. > > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 > > umsm0: this device is not using CDC notify message in intr pipe. > > Please send your dmesg to <bugs@openbsd.org>, thanks. > > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 > > umsm0: this device is not using CDC notify message in intr pipe. > > Please send your dmesg to <bugs@openbsd.org>, thanks. > > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 > > umsm0: this device is not using CDC notify message in intr pipe. > > Please send your dmesg to <bugs@openbsd.org>, thanks. > > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 > > umsm0: this device is not using CDC notify message in intr pipe. > > Please send your dmesg to <bugs@openbsd.org>, thanks. > > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 > > ho1 at mainbus0 addr 0xfff9e000: SUNW,psycho, impl 0, version 4, ign c0 > > psycho1: bus range 128-128, PCI bus 128 > > psycho1: dvma map fe000000-ffffffff, STC0 enabled, STC1 enabled > > pci1 at psycho1 > > sd2 at scsibus4 targ 1 lun 0: <HUAWEI, SD Storage, 2.31> SCSI2 > > 0/direct removable > > vscsi0 at root > > scsibus5 at vscsi0: 256 targets > > softraid0 at root > > scsibus6 at softraid0: 256 targets > > bootpath: /pci@83,4000/FJSV,ulsa@2,1/disk@0,0 > > root on sd0a (e489192361503865.a) swap on sd0b dump on sd0b > > umsm0: this device is not using CDC notify message in intr pipe. > > Please send your dmesg to <bugs@openbsd.org>, thanks. > > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 > > umsm0: this device is not using CDC notify message in intr pipe. > > Please send your dmesg to <bugs@openbsd.org>, thanks. > > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 > > umsm0: this device is not using CDC notify message in intr pipe. > > Please send your dmesg to <bugs@openbsd.org>, thanks. > > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 > > umsm0: this device is not using CDC notify message in intr pipe. > > Please send your dmesg to <bugs@openbsd.org>, thanks. > > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 > > umsm0: this device is not using CDC notify message in intr pipe. > > Please send your dmesg to <bugs@openbsd.org>, thanks. > > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 > > umsm0: this device is not using CDC notify message in intr pipe. > > Please send your dmesg to <bugs@openbsd.org>, thanks. > > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 > > umsm0: this device is not using CDC notify message in intr pipe. > > Please send your dmesg to <bugs@openbsd.org>, thanks. > > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 > > umsm0: this device is not using CDC notify message in intr pipe. > > Please send your dmesg to <bugs@openbsd.org>, thanks. > > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 > > umsm0: this device is not using CDC notify message in intr pipe. > > Please send your dmesg to <bugs@openbsd.org>, thanks. > > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 > > umsm0: this device is not using CDC notify message in intr pipe. > > Please send your dmesg to <bugs@openbsd.org>, thanks. > > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 > > umsm0: this device is not using CDC notify message in intr pipe. > > Please send your dmesg to <bugs@openbsd.org>, thanks. > > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 > > umsm0: this device is not using CDC notify message in intr pipe. > > Please send your dmesg to <bugs@openbsd.org>, thanks. > > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 > > umsm0: this device is not using CDC notify message in intr pipe. > > Please send your dmesg to <bugs@openbsd.org>, thanks. > > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 > > umsm0: this device is not using CDC notify message in intr pipe. > > Please send your dmesg to <bugs@openbsd.org>, thanks. > > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 > > umsm0: this device is not using CDC notify message in intr pipe. > > Please send your dmesg to <bugs@openbsd.org>, thanks. > > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 > > umsm0: this device is not using CDC notify message in intr pipe. > > Please send your dmesg to <bugs@openbsd.org>, thanks. > > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 > >
