The following reply was made to PR kernel/6615; it has been noted by GNATS.
From: Joel Sing <[email protected]> To: Laurence Tratt <[email protected]> Cc: [email protected] Subject: Re: kernel/6615: Latest snapshot not mounting root device Date: Wed, 25 May 2011 21:56:30 +1000 On Wednesday 25 May 2011, Laurence Tratt wrote: > >Number: 6615 > >Category: kernel > >Synopsis: DH67CF fails to mount root device on latest snapshot > >Confidential: yes > >Severity: serious > >Priority: medium > >Responsible: bugs > >State: open > >Quarter: > >Keywords: > >Date-Required: > >Class: sw-bug > >Submitter-Id: unknown > >Arrival-Date: Wed May 25 08:50:01 GMT 2011 > >Closed-Date: > >Last-Modified: > >Originator: > >Release: > >Organization: > >Environment: > > System : OpenBSD 4.9 > Details : > Architecture: OpenBSD.amd64 > Machine : amd64 > > >Description: > > On my Sandy Bridge machine, the latest snapshot (May 24th) fails to > boot whereas previous snapshots (circa Apr 17) were fine. The kernel > appears to boot mostly fine but the end of the dmesg is: > softraid0 at root > panic: root device (a5d22c2aa2236afb) not found > I'm then dropped into ddb, but since my USB keyboard then stops > working, I can't get much further. > > My hunch is that this might be an AHCI problem. In older snapshots the > following line appears: > ahci0: stopping the port, softreset slot 1 was still active. > but (unless it zipped extremely fast off of the screen) I did not see > this on the newer snapshot. > > Changing the BIOS from AHCI to IDE allows the machine to boot, although > the disklabels are then all wrong (unsurprisingly) so I haven't got > past single user mode yet (since my fstab is in terms of sd0, which, > since the BIOS is in IDE mode, has then become wd0). > > This does make me wonder, however, if this might be a disklabel problem > as the DUID appears to change between snapshots (from > naa.5e83a97f58bb5e60 to a5d22c2aa2236afb?). However, I am currently > clueless with DUIDs so I may not be interpreting that correctly. The first of those is disk serial number, the second is the DUID. Can you please provide the dmesg from the current kernel when the BIOS is configured for AHCI, along with the output from `pcidump -v` (in AHCI mode also, obviously after booting the older kernel)? > >How-To-Repeat: > >Fix: > > Successful (older) dmesg: > > OpenBSD 4.9-current (GENERIC.MP) #2: Sun Apr 17 22:06:50 BST 2011 > > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 4197277696 (4002MB) > avail mem = 4071497728 (3882MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xeb170 (52 entries) > bios0: vendor Intel Corp. version "BLH6710H.86A.0110.2011.0415.1506" date > 04/15/2011 bios0: TranquilPC IXL > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP APIC SSDT MCFG HPET > acpi0: wakeup devices PS2K(S3) PS2M(S3) UAR1(S3) P0P1(S4) P0P2(S4) > P0P3(S4) P0P4(S4) GBE_(S4) BR20(S3) EUSB(S3) USBE(S3) PEX0(S4) BR21(S4) > PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4) PEX5(S4) PEX6(S4) PEX7(S4) SLPB(S0) > PWRB(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i7-2600S CPU @ 2.80GHz, 2794.10 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFL >USH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX >,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,AES,XSAVE,AVX,NXE, >LONG cpu0: 256KB 64b/line 8-way L2 cache > cpu0: apic clock running at 99MHz > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Core(TM) i7-2600S CPU @ 2.80GHz, 2793.65 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFL >USH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX >,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,AES,XSAVE,AVX,NXE, >LONG cpu1: 256KB 64b/line 8-way L2 cache > ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (P0P1) > acpiprt2 at acpi0: bus -1 (P0P2) > acpiprt3 at acpi0: bus -1 (P0P3) > acpiprt4 at acpi0: bus -1 (P0P4) > acpiprt5 at acpi0: bus 1 (PEX0) > acpiprt6 at acpi0: bus -1 (BR21) > acpiprt7 at acpi0: bus 2 (PEX1) > acpiprt8 at acpi0: bus -1 (PEX2) > acpiprt9 at acpi0: bus -1 (PEX3) > acpiprt10 at acpi0: bus -1 (PEX4) > acpiprt11 at acpi0: bus -1 (PEX5) > acpiprt12 at acpi0: bus -1 (PEX6) > acpiprt13 at acpi0: bus -1 (PEX7) > acpicpu0 at acpi0: C3, C2, C1, PSS > acpicpu1 at acpi0: C3, C2, C1, PSS > acpibtn0 at acpi0: SLPB > acpibtn1 at acpi0: PWRB > cpu0: unknown i686 model 0x2a, can't get bus clock > cpu0: Enhanced SpeedStep 2793 MHz: speeds: 2801, 2800, 2700, 2600, 2500, > 2400, 2300, 2200, 2100, 2000, 1900, 1800, 1700, 1600 MHz pci0 at mainbus0 > bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Sandy Bridge Host" rev 0x09 > vga1 at pci0 dev 2 function 0 "Intel Sandy Bridge Video" rev 0x09 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > intagp at vga1 not configured > "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > em0 at pci0 dev 25 function 0 "Intel 82579V" rev 0x05: apic 0 int 20 (irq > 10)em0: The EEPROM Checksum Is Not Valid em0: Unable to initialize the > hardware > ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x05: apic 0 int > 16 (irq 11) usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x05: > apic 0 int 22 (irq 5) azalia0: codecs: Realtek/0x0892, Intel/0x2805, using > Realtek/0x0892 audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb5: apic 0 int > 17 (irq 3) pci1 at ppb0 bus 1 > ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb5: apic 0 int > 16 (irq 11) pci2 at ppb1 bus 2 > "NEC PCIE-XHCI" rev 0x03 at pci2 dev 0 function 0 not configured > ehci1 at pci0 dev 29 function 0 vendor "Intel", unknown product 0x1c26 > rev 0x05: apic 0 int 23 (irq 7) usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > pcib0 at pci0 dev 31 function 0 "Intel H67 LPC" rev 0x05 > ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x05: apic 0 > int 19 (irq 4), AHCI 1.3 scsibus0 at ahci0: 32 targets > ahci0: stopping the port, softreset slot 1 was still active. > sd0 at scsibus0 targ 0 lun 0: <ATA, OCZ-VERTEX3, 2.02> SCSI3 0/direct > fixed naa.5e83a97f58bb5e60 sd0: 114473MB, 512 bytes/sec, 234441648 sec > total > sd1 at scsibus0 targ 1 lun 0: <ATA, SAMSUNG HD154UI, 1AG0> SCSI3 0/direct > fixed naa.50000f000b0c4037 sd1: 1430799MB, 512 bytes/sec, 2930277168 sec > total > cd0 at scsibus0 targ 2 lun 0: <Optiarc, DVD RW AD-7690H, 1.00> ATAPI > 5/cdrom removable "Intel 6 Series SMBus" rev 0x05 at pci0 dev 31 function 3 > not configured isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > mtrr: Pentium Pro MTRR support > uhub2 at uhub0 port 1 "Intel product 0x0024" rev 2.00/0.00 addr 2 > run0 at uhub2 port 2 "Ralink 802.11 n WLAN" rev 2.00/1.01 addr 3 > run0: MAC/BBP RT2860 (rev 0x0101), RF RT2820 (MIMO 2T2R), address > 00:1c:f0:8b:06:0b umass0 at uhub2 port 3 configuration 1 interface 0 > "Generic USB2.0-CRW" rev 2.00/51.95 addr 4 umass0: using SCSI over > Bulk-Only > scsibus1 at umass0: 2 targets, initiator 0 > sd2 at scsibus1 targ 1 lun 0: <Generic-, Compact Flash, 1.00> SCSI0 > 0/direct removable sd3 at scsibus1 targ 1 lun 1: <Generic-, SM/xD-Picture, > 1.00> SCSI0 0/direct removable sd4 at scsibus1 targ 1 lun 2: <Generic-, > SD/MMC, 1.00> SCSI0 0/direct removable sd5 at scsibus1 targ 1 lun 3: > <Generic-, MS/MS-Pro, 1.00> SCSI0 0/direct removable ugen0 at uhub2 port 4 > "COMPRO VideoMate IR20" rev 2.00/89.ab addr 5 uhub3 at uhub1 port 1 "Intel > product 0x0024" rev 2.00/0.00 addr 2 uhidev0 at uhub3 port 3 configuration > 1 interface 0 "MALTRON USB Multimedia Keyboard" rev 1.10/1.22 addr 3 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 modifier keys, 6 key codes, country code 13 > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at uhub3 port 3 configuration 1 interface 1 "MALTRON USB > Multimedia Keyboard" rev 1.10/1.22 addr 3 uhidev1: iclass 3/0, 3 report ids > uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0 > uhid1 at uhidev1 reportid 3: input=2, output=0, feature=0 > uhub4 at uhub3 port 7 "ATEN International product 0x7000" rev 1.10/1.00 > addr 4 uhidev2 at uhub4 port 1 configuration 1 interface 0 "ATEN Advance > Tech Inc. CS-1764 V1.4.132" rev 1.10/1.00 addr 5 uhidev2: iclass 3/1 > ukbd1 at uhidev2: 8 modifier keys, 6 key codes > wskbd2 at ukbd1 mux 1 > wskbd2: connecting to wsdisplay0 > uhidev3 at uhub4 port 1 configuration 1 interface 1 "ATEN Advance Tech > Inc. CS-1764 V1.4.132" rev 1.10/1.00 addr 5 uhidev3: iclass 3/1 > ums0 at uhidev3: 5 buttons, Z dir > wsmouse0 at ums0 mux 0 > uhidev4 at uhub4 port 3 configuration 1 interface 0 "Logitech Trackball" > rev 1.10/2.20 addr 6 uhidev4: iclass 3/1 > ums1 at uhidev4: 3 buttons, Z dir > wsmouse1 at ums1 mux 0 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > root on sd0a swap on sd0b dump on sd0b > > > Successful new dmesg using IDE not AHCI mode (please note I haven't taken > this into multi-user mode as the disklabels drop one into single-user > mode): > > OpenBSD 4.9-current (GENERIC.MP) #7: Mon May 23 21:24:59 MDT 2011 > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 4197285888 (4002MB) > avail mem = 4063350784 (3875MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe9450 (52 entries) > bios0: vendor Intel Corp. version "BLH6710H.86A.0110.2011.0415.1506" date > 04/15/2011 bios0: TranquilPC IXL > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP APIC SSDT MCFG HPET > acpi0: wakeup devices PS2K(S3) PS2M(S3) UAR1(S3) P0P1(S4) P0P2(S4) > P0P3(S4) P0P4(S4) GBE_(S4) BR20(S3) EUSB(S3) USBE(S3) PEX0(S4) BR21(S4) > PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4) PEX5(S4) PEX6(S4) PEX7(S4) SLPB(S0) > PWRB(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i7-2600S CPU @ 2.80GHz, 2794.05 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFL >USH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX >,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,AES,XSAVE,AVX,NXE, >LONG cpu0: 256KB 64b/line 8-way L2 cache > cpu0: apic clock running at 99MHz > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Core(TM) i7-2600S CPU @ 2.80GHz, 2793.66 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFL >USH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX >,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,AES,XSAVE,AVX,NXE, >LONG cpu1: 256KB 64b/line 8-way L2 cache > ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (P0P1) > acpiprt2 at acpi0: bus -1 (P0P2) > acpiprt3 at acpi0: bus -1 (P0P3) > acpiprt4 at acpi0: bus -1 (P0P4) > acpiprt5 at acpi0: bus 1 (PEX0) > acpiprt6 at acpi0: bus -1 (BR21) > acpiprt7 at acpi0: bus 2 (PEX1) > acpiprt8 at acpi0: bus -1 (PEX2) > acpiprt9 at acpi0: bus -1 (PEX3) > acpiprt10 at acpi0: bus -1 (PEX4) > acpiprt11 at acpi0: bus -1 (PEX5) > acpiprt12 at acpi0: bus -1 (PEX6) > acpiprt13 at acpi0: bus -1 (PEX7) > acpicpu0 at acpi0: C3, C2, C1, PSS > acpicpu1 at acpi0: C3, C2, C1, PSS > acpibtn0 at acpi0: SLPB > acpibtn1 at acpi0: PWRB > cpu0: Enhanced SpeedStep 2793 MHz: speeds: 2801, 2800, 2700, 2600, 2500, > 2400, 2300, 2200, 2100, 2000, 1900, 1800, 1700, 1600 MHz pci0 at mainbus0 > bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09 > vga1 at pci0 dev 2 function 0 "Intel GT1 Video" rev 0x09 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > intagp at vga1 not configured > "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > em0 at pci0 dev 25 function 0 "Intel 82579V" rev 0x05: apic 0 int 20, > address e0:69:95:2e:42:6d ehci0 at pci0 dev 26 function 0 "Intel 6 Series > USB" rev 0x05: apic 0 int 16 usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x05: > apic 0 int 22 azalia0: codecs: Realtek/0x0892, Intel/0x2805, using > Realtek/0x0892 audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb5: apic 0 int > 17 pci1 at ppb0 bus 1 > ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb5: apic 0 int > 16 pci2 at ppb1 bus 2 > "NEC PCIE-XHCI" rev 0x03 at pci2 dev 0 function 0 not configured > ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x05: apic 0 int > 23 usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > pcib0 at pci0 dev 31 function 0 "Intel H67 LPC" rev 0x05 > pciide0 at pci0 dev 31 function 2 "Intel 6 Series SATA" rev 0x05: DMA, > channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide0: using apic 0 int 19 for native-PCI interrupt > wd0 at pciide0 channel 0 drive 0: <OCZ-VERTEX3> > wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors > atapiscsi0 at pciide0 channel 0 drive 1 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <Optiarc, DVD RW AD-7690H, 1.00> ATAPI > 5/cdrom removable wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 > cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5 > wd1 at pciide0 channel 1 drive 0: <SAMSUNG HD154UI> > wd1: 16-sector PIO, LBA48, 1430799MB, 2930277168 sectors > wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 6 > ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x05: apic 0 > int 18 iic0 at ichiic0 > iic0: addr 0x2d 00=05 01=01 02=42 03=0a 04=0a 05=01 06=01 07=3c 08=00 > 09=4d 0b=01 20=02 21=01 22=46 23=46 24=4f 25=52 26=55 27=4d 28=4d 29=4d > 2a=7b 2b=a6 31=00 33=4d 34=02 35=5d 36=00 38=00 39=c1 3a=02 3b=01 3c=24 > 3d=46 3f=00 40=4d 42=4d 43=4d 44=23 45=00 46=00 47=00 48=01 4e=01 50=30 > 51=80 52=00 53=4b 54=00 55=50 56=05 57=fe words 00=05ff 01=01ff 02=42ff > 03=0aff 04=0aff 05=01ff 06=01ff 07=3cff iic0: addr 0x4b 40=14 words 00=ffff > 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff spdmem0 at iic0 > addr 0x52: 4GB DDR3 SDRAM PC3-10600 > pciide1 at pci0 dev 31 function 5 "Intel 6 Series SATA" rev 0x05: DMA, > channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide1: using > apic 0 int 19 for native-PCI interrupt > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > mtrr: Pentium Pro MTRR support > uhub2 at uhub0 port 1 "Intel product 0x0024" rev 2.00/0.00 addr 2 > run0 at uhub2 port 2 "Ralink 802.11 n WLAN" rev 2.00/1.01 addr 3 > run0: MAC/BBP RT2860 (rev 0x0101), RF RT2820 (MIMO 2T2R), address > 00:1c:f0:8b:06:0b umass0 at uhub2 port 3 configuration 1 interface 0 > "Generic USB2.0-CRW" rev 2.00/51.95 addr 4 umass0: using SCSI over > Bulk-Only > scsibus1 at umass0: 2 targets, initiator 0 > sd0 at scsibus1 targ 1 lun 0: <Generic-, Compact Flash, 1.00> SCSI0 > 0/direct removable sd1 at scsibus1 targ 1 lun 1: <Generic-, SM/xD-Picture, > 1.00> SCSI0 0/direct removable sd2 at scsibus1 targ 1 lun 2: <Generic-, > SD/MMC, 1.00> SCSI0 0/direct removable sd3 at scsibus1 targ 1 lun 3: > <Generic-, MS/MS-Pro, 1.00> SCSI0 0/direct removable ugen0 at uhub2 port 4 > "COMPRO VideoMate IR20" rev 2.00/89.ab addr 5 uhub3 at uhub1 port 1 "Intel > product 0x0024" rev 2.00/0.00 addr 2 uhidev0 at uhub3 port 3 configuration > 1 interface 0 "MALTRON USB Multimedia Keyboard" rev 1.10/1.22 addr 3 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 modifier keys, 6 key codes, country code 13 > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at uhub3 port 3 configuration 1 interface 1 "MALTRON USB > Multimedia Keyboard" rev 1.10/1.22 addr 3 uhidev1: iclass 3/0, 3 report ids > uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0 > uhid1 at uhidev1 reportid 3: input=2, output=0, feature=0 > uhub4 at uhub3 port 7 "ATEN International product 0x7000" rev 1.10/1.00 > addr 4 uhidev2 at uhub4 port 1 configuration 1 interface 0 "ATEN Advance > Tech Inc. CS-1764 V1.4.132" rev 1.10/1.00 addr 5 uhidev2: iclass 3/1 > ukbd1 at uhidev2: 8 modifier keys, 6 key codes > wskbd2 at ukbd1 mux 1 > wskbd2: connecting to wsdisplay0 > uhidev3 at uhub4 port 1 configuration 1 interface 1 "ATEN Advance Tech > Inc. CS-1764 V1.4.132" rev 1.10/1.00 addr 5 uhidev3: iclass 3/1 > ums0 at uhidev3: 5 buttons, Z dir > wsmouse0 at ums0 mux 0 > uhidev4 at uhub4 port 3 configuration 1 interface 0 "Logitech Trackball" > rev 1.10/2.20 addr 6 uhidev4: iclass 3/1 > ums1 at uhidev4: 3 buttons, Z dir > wsmouse1 at ums1 mux 0 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > root on wd0a (a5d22c2aa2236afb.a) swap on wd0b dump on wd0b > syncing disks... done > rebooting... > > >Release-Note: > >Audit-Trail: > >Unformatted: -- "Reason is not automatic. Those who deny it cannot be conquered by it. Do not count on them. Leave them alone." -- Ayn Rand
