Hi, I'm sorry I should have clarified. The "parted /dev/sdc..." output has been copied after the crash, this is what parted crash message suggested to run and copy-paste into the bug report.
The crash happened right after the quit command. I have rebooted the machine since yesterday and having a hard time reproducing the problem. On Wed, 14 Feb 2018, at 19:24, Phil Susi wrote: > On 2/13/2018 1:33 PM, Alex March wrote: > > > > > > ----- Original message ----- > > From: Alex March <alexma...@fastmail.com> > > To: bugs-par...@gnu.org > > Subject: parted 3.2: Error: FPE_INTDIV (Integer: divide by zero)[1] > > 4833 abort (core dumped) > > Date: Tue, 13 Feb 2018 18:32:03 +0000 > > > > Hi, > > > > Latest 3.2 version. > > > > % sudo parted /dev/sdc unit co print unit s print > > [sudo] password for march: > > Model: Seagate Expansion (scsi) > > Disk /dev/sdc: 2000GB > > Sector size (logical/physical): 512B/4096B > > Partition Table: msdos > > Disk Flags: > > > > Number Start End Size Type File system Flags > > 1 1049kB 2000GB 2000GB primary ntfs > > > > Model: Seagate Expansion (scsi) > > Disk /dev/sdc: 3907029167s > > Sector size (logical/physical): 512B/4096B > > Partition Table: msdos > > Disk Flags: > > > > Number Start End Size Type File system Flags > > 1 2048s 3907028991s 3907026944s primary ntfs > > I assume this is the point where you manually typed "print devices" > without indicating that in your original message? > > > Command History: > > list > > print > > print devices > > exit > > quit > > > > Error: FPE_INTDIV (Integer: divide by zero)[1] 4833 abort (core dumped) > > parted > > The error happened after you tried to quit? Can you try to reduce the > reproduction steps to be as simple as possible? For instance, leave out > the print devices and list commands if they are not required? >
