On 2/13/2018 1:33 PM, Alex March wrote: > > > ----- Original message ----- > From: Alex March <alexma...@fastmail.com> > To: bugs-par...@gnu.org > Subject: parted 3.2: Error: FPE_INTDIV (Integer: divide by zero)[1] 4833 > abort (core dumped) > Date: Tue, 13 Feb 2018 18:32:03 +0000 > > Hi, > > Latest 3.2 version. > > % sudo parted /dev/sdc unit co print unit s print > [sudo] password for march: > Model: Seagate Expansion (scsi) > Disk /dev/sdc: 2000GB > Sector size (logical/physical): 512B/4096B > Partition Table: msdos > Disk Flags: > > Number Start End Size Type File system Flags > 1 1049kB 2000GB 2000GB primary ntfs > > Model: Seagate Expansion (scsi) > Disk /dev/sdc: 3907029167s > Sector size (logical/physical): 512B/4096B > Partition Table: msdos > Disk Flags: > > Number Start End Size Type File system Flags > 1 2048s 3907028991s 3907026944s primary ntfs
I assume this is the point where you manually typed "print devices" without indicating that in your original message? > Command History: > list > print > print devices > exit > quit > > Error: FPE_INTDIV (Integer: divide by zero)[1] 4833 abort (core dumped) > parted The error happened after you tried to quit? Can you try to reduce the reproduction steps to be as simple as possible? For instance, leave out the print devices and list commands if they are not required?
