By the way, it seems to be caused by the default emulated chipset PIIX3. Switching to ICH9, it proceeds further but fails to access the disk. Attached is the log of the serial console.
Diego El lun, 11 ago 2025 a las 22:45, Diego Nieto Cid (<dnie...@gmail.com>) escribió: > Hello, > > I added some printf here and there and it seems there is no HPET table in > VirtualBox APIC, at > least no one can be found in the way we are discovering them. > > So, hpet_addr remains uninitialized. This is what I get on the serial > console. There seems to be > only FACP, APIC and SSDT tables. > ------------------------------- > ECTMAP: min:613 low:736 high:1227 > acpi_apic_init :: called > ACPI >= v2.0 > acpi_apic_init :: try to get XSDT pointer... > acpi_apic_init :: try to get XSDT pointer: ffffffff849b5030 (3) > acpi_apic_init :: try to get APIC table pointer... > acpi_get_apic2 :: XSDT TABLE: F A C P > acpi_get_apic2 :: XSDT TABLE: A P I C > acpi_get_apic2 :: XSDT TABLE: S S D T > acpi_apic_init :: try to get APIC table pointer: ffffffff849b7240 > ACPI: > rsdp = 0x3ff0030 > rsdt/xsdt = 0xffffffff849b5030 (n = 3) > 8 bit APIC ids > APIC entry=0xffffffff849b726c end=0xffffffff849b7294 > APIC entry=0xffffffff849b726c end=0xffffffff849b7294 > APIC entry=0xffffffff849b7276 end=0xffffffff849b7294 > APIC entry=0xffffffff849b7280 end=0xffffffff849b7294 > APIC entry=0xffffffff849b7288 end=0xffffffff849b7294 > CPUS: > CPU 0 - APIC ID 0 - addr=0xffffffff849b9000 > IOAPICS: > IOAPIC 0 - APIC ID 1 - addr=0xffffffff849ba000 > IOAPIC version 0x20 > IRQ override: pin=0 gsi=2 trigger=EDGE polarity=HIGH > IRQ override: pin=9 gsi=9 trigger=LEVEL polarity=LOW > IOAPIC 0 configured with GSI 0-23 > com 2 out of range > RTC time is 2025-08-11 22:36:14 > hpet_init :: called > ../i386/i386/apic.c:428: hpet_init: Assertion `hpet_addr != 0' > failed.panic ../kern/debug.c:103: Debugger: Debugger invoked, but there > isn't one! > -------------------------------- > > Cheers, > Diego > > El lun, 11 ago 2025 a las 11:01, Bruno Haible via Bug reports for the GNU > Hurd (<bug-hurd@gnu.org>) escribió: > >> The image from November 2024 >> >> https://cdimage.debian.org/cdimage/ports/latest/hurd-amd64/debian-hurd-20241115.img.tar.xz >> boots fine in VirtualBox (7.0.x on Ubuntu). >> >> The image from August 2025 >> >> https://cdimage.debian.org/cdimage/ports/latest/hurd-amd64/debian-hurd-amd64-20250807.img.tar.xz >> does not boot in VirtualBox (7.0.x on Ubuntu). >> It reboots after some I/O APIC message. >> Find attached a screen capture and the log. >> >> This is with I/O APIC on in the VM's configuration. >> If I turn I/O APIC off, it does not even get that far: it hangs during >> boot. >> >> Bruno >> >>
hurd-vm-com0.log
Description: Binary data
