Hej Ludo,
I see that some time has passed and I believe that the issue can be closed.
Long story short, my hdd has died and I bought a new one and
re-installed. I could imagine that the errors I was running into were
related to the impending hardware failure -- that's a speculation,
though. Anyway, following your suggestions brought me to the same point
I was at earlier (gdb didnt show anything useful).
Another possible source of error I have not mentioned before (I simply
forgot about it): after the fresh install, I swapped the swap and /home
partition using another OS (I have two hdds, each of which has a
different OS). I don't know if that could've been the problem and/or one
reason the hdd died.
Anyway, I'm thankful for your supportive attitude and your time.
Have a good day,
Olivier
Am 12.06.20 um 16:12 schrieb Ludovic Courtès:
Hi Olivier,
o.ro...@posteo.net skribis:
I followed the steps you mentioned, the results you find here:
https://www.mediafire.com/file/g5yz8f3pput8f3w/gdb-output/file . The
only part I omitted from the gdb output is the first lines mentioned
the license. (Will look at IPFS, maybe next time :))
Since it’s a small file, you can send it as an attachment.
GDB shows:
--8<---------------cut here---------------start------------->8---
Core was generated by
`/gnu/store/0m0vd873jp61lcm4xa3ljdgx381qa782-guile-3.0.2/bin/guile
--no-auto-com'.
Program terminated with signal SIGBUS, Bus error.
#0 0x00007f90885ccc78 in ?? ()
[Current thread is 1 (LWP 845)]
(gdb) thread apply all bt
Thread 9 (LWP 853):
#0 0x00007f90884d90a4 in ?? ()
#1 0x0000000000000001 in ?? ()
#2 0x0000000000000001 in ?? ()
#3 0x00007f90840c9a30 in ?? ()
#4 0x00007f90840c95a0 in ?? ()
#5 0x00007f90840ca700 in ?? ()
#6 0x00007f90885ac067 in ?? ()
#7 0x00007f90845efa80 in ?? ()
#8 0x00007f90884fed94 in ?? ()
#9 0x0000000000000001 in ?? ()
#10 0x00007f90840c95a0 in ?? ()
--8<---------------cut here---------------end--------------->8---
That means debugging info is lacking. To address that, could you run:
guix build $(guix gc --derivers
/gnu/store/0m0vd873jp61lcm4xa3ljdgx381qa782-guile-3.0.2)
and then:
echo 'set debug-file-directory
/gnu/store/9lg4gssswn2cwn54p6jjy6nld16ah795-guile-3.0.2-debug/lib/debug' >>
~/.gdbinit
At that point, you can try again to run:
gdb --core=./core
That will hopefully show more useful info.
Thanks in advance!
Ludo’.
