Hello,
I have two virtual machines. With the latest versions of BRLTTY: BRLTTY
work perfectly on my Archlinux machine with my VarioUltra. on the other
hand, with Debian, my VarioUltra is not usable.
I would therefore correct the problem with my Debian machine.
I have tried to apply the patch supplied (release-all-1.patch) and it is
the same result on the two VM.
Otherwise, I don't reproduce the bugs in the same way that
Jean-Philippe. If I use my Braille display only, it's good. But if I
also use the system keyboard, BRLTTY crashes...
Please refer in attachment for a log of my Debian BRLTTY.
On 2016-08-08 6:28 am, Dave Mielke wrote:
[quoted lines by MENGUAL Jean-Philippe on 2016/08/07 at 16:50 +0200]
Please pull the latest update, and then apply the attached patch
(release-all-1.patch).
_______________________________________________
This message was sent via the BRLTTY mailing list.
To post a message, send an e-mail to: BRLTTY@mielke.cc
For general information, go to:
http://mielke.cc/mailman/listinfo/brltty
2016-08-08@00:50:40.107 [brltty] BRLTTY 5.4 rev BRLTTY-5.4-53-ge7eb2a4aM
[http://brltty.com/]
2016-08-08@00:50:40.108 [brltty] lock descriptor allocated:
queue-discarded-elements
2016-08-08@00:50:40.108 [brltty] Log Level: debug
2016-08-08@00:50:40.108 [brltty] pushed command environment: initial
2016-08-08@00:50:40.108 [brltty] report listener registered: 0:
handleUpdateBrailleOnline
2016-08-08@00:50:40.109 [brltty] program exit event added: screen-data
2016-08-08@00:50:40.109 [brltty] Working Directory: /etc
2016-08-08@00:50:40.109 [brltty] Configuration File: /etc/brltty.conf
2016-08-08@00:50:40.109 [brltty] Updatable Directory: /var/lib/brltty
2016-08-08@00:50:40.109 [brltty] Preferences File: brltty.prefs
2016-08-08@00:50:40.109 [brltty] Writable Directory: /var/run/brltty
2016-08-08@00:50:40.109 [brltty] Drivers Directory: /lib/brltty
2016-08-08@00:50:40.109 [brltty] Tables Directory: /etc/brltty
2016-08-08@00:50:40.109 [brltty] program exit event added: tunes
2016-08-08@00:50:40.109 [brltty] tune thread state change: 0 -> 1
2016-08-08@00:50:40.109 [brltty] tune thread state change: 1 -> 3
2016-08-08@00:50:40.109 [brltty] regions: text=0.0 status=0.0
2016-08-08@00:50:40.109 [brltty] shifts: full=1 half=0 vertical=5
2016-08-08@00:50:40.109 [brltty] compiling text table:
/etc/brltty/Text/fr-2007.ttb
2016-08-08@00:50:40.109 [brltty] file opened: /etc/brltty/Text/fr-2007.ttb fd=8
2016-08-08@00:50:40.109 [brltty] including data file:
/etc/brltty/Text/fr-2007.ttb
2016-08-08@00:50:40.109 [brltty] file opened: /etc/brltty/Text/ltr-latin.tti
fd=9
2016-08-08@00:50:40.109 [brltty] including data file:
/etc/brltty/Text/ltr-latin.tti
2016-08-08@00:50:40.109 [brltty] file opened: /etc/brltty/Text/ltr-alias.tti
fd=10
2016-08-08@00:50:40.109 [brltty] including data file:
/etc/brltty/Text/ltr-alias.tti
2016-08-08@00:50:40.110 [brltty] file opened: /etc/brltty/Text/num-french.tti
fd=9
2016-08-08@00:50:40.110 [brltty] including data file:
/etc/brltty/Text/num-french.tti
2016-08-08@00:50:40.110 [brltty] file opened: /etc/brltty/Text/num-alias.tti
fd=10
2016-08-08@00:50:40.110 [brltty] including data file:
/etc/brltty/Text/num-alias.tti
2016-08-08@00:50:40.111 [brltty] file opened: /etc/brltty/Text/common.tti fd=9
2016-08-08@00:50:40.111 [brltty] including data file:
/etc/brltty/Text/common.tti
2016-08-08@00:50:40.111 [brltty] file opened: /etc/brltty/Text/spaces.tti fd=10
2016-08-08@00:50:40.111 [brltty] including data file:
/etc/brltty/Text/spaces.tti
2016-08-08@00:50:40.111 [brltty] file opened: /etc/brltty/Text/boxes.tti fd=10
2016-08-08@00:50:40.111 [brltty] including data file: /etc/brltty/Text/boxes.tti
2016-08-08@00:50:40.111 [brltty] file opened: /etc/brltty/Text/blocks.tti fd=10
2016-08-08@00:50:40.111 [brltty] including data file:
/etc/brltty/Text/blocks.tti
2016-08-08@00:50:40.111 [brltty] Text Table: fr-2007
2016-08-08@00:50:40.111 [brltty] program exit event added: text-table
2016-08-08@00:50:40.111 [brltty] Attributes Table: left_right
2016-08-08@00:50:40.111 [brltty] program exit event added: attributes-table
2016-08-08@00:50:40.111 [brltty] program exit event added: contraction-table
2016-08-08@00:50:40.111 [brltty] Contraction Table: none
2016-08-08@00:50:40.111 [brltty] Keyboard Property: type=
2016-08-08@00:50:40.111 [brltty] Keyboard Property: vendor=
2016-08-08@00:50:40.111 [brltty] Keyboard Property: product=
2016-08-08@00:50:40.111 [brltty] program exit event added: keyboard-table
2016-08-08@00:50:40.111 [brltty] Keyboard Table: none
2016-08-08@00:50:40.111 [brltty] program exit event added: screen-driver
2016-08-08@00:50:40.111 [brltty] activity action request: screen-driver: start
2016-08-08@00:50:40.111 [brltty] activity state change: screen-driver:
4[preparing]
2016-08-08@00:50:40.111 [brltty] activity state change: screen-driver:
1[prepared]
2016-08-08@00:50:40.111 [brltty] activity state change: screen-driver:
2[scheduled]
2016-08-08@00:50:40.111 [brltty] BrlAPI Server: release 0.6.5
2016-08-08@00:50:40.111 [brltty] API Parameter: auth=
2016-08-08@00:50:40.111 [brltty] API Parameter: host=
2016-08-08@00:50:40.111 [brltty] API Parameter: stacksize=
2016-08-08@00:50:40.111 [brltty] program exit event added: address-table
2016-08-08@00:50:40.111 [brltty] program exit event added: api-server
2016-08-08@00:50:40.111 [brltty] program exit event added: braille-data
2016-08-08@00:50:40.111 [brltty] program exit event added: braille-driver
2016-08-08@00:50:40.111 [brltty] activity action request: braille-driver: start
2016-08-08@00:50:40.111 [brltty] activity state change: braille-driver:
4[preparing]
2016-08-08@00:50:40.111 [brltty] Braille Display Dimensions: 1 row, 1 column
2016-08-08@00:50:40.111 [brltty] regions: text=0.1 status=0.0
2016-08-08@00:50:40.111 [brltty] shifts: full=1 half=0 vertical=5
2016-08-08@00:50:40.111 [brltty] activity state change: braille-driver:
1[prepared]
2016-08-08@00:50:40.111 [brltty] activity state change: braille-driver:
2[scheduled]
2016-08-08@00:50:40.111 [brltty] program exit event added: speech-data
2016-08-08@00:50:40.111 [brltty] program exit event added: speech-driver
2016-08-08@00:50:40.111 [brltty] activity action request: speech-driver: start
2016-08-08@00:50:40.111 [brltty] activity state change: speech-driver:
4[preparing]
2016-08-08@00:50:40.111 [brltty] activity state change: speech-driver:
1[prepared]
2016-08-08@00:50:40.111 [brltty] activity state change: speech-driver:
2[scheduled]
2016-08-08@00:50:40.111 [brltty] Speech Input: none
2016-08-08@00:50:40.111 [brltty] program exit event added: sessions
2016-08-08@00:50:40.111 [brltty] pushed command environment: main
2016-08-08@00:50:40.111 [brltty] pushed command handler: unhandled
2016-08-08@00:50:40.111 [brltty] pushed command handler: miscellaneous
2016-08-08@00:50:40.111 [brltty] pushed command handler: learn
2016-08-08@00:50:40.111 [brltty] pushed command handler: speech
2016-08-08@00:50:40.111 [brltty] pushed command handler: clipboard
2016-08-08@00:50:40.111 [brltty] pushed command handler: preferences
2016-08-08@00:50:40.111 [brltty] pushed command handler: toggle
2016-08-08@00:50:40.111 [brltty] report listener registered: 3:
brailleWindowUpdatedListener
2016-08-08@00:50:40.111 [brltty] pushed command handler: touch
2016-08-08@00:50:40.111 [brltty] report listener registered: 0:
keycodeCommandDataResetListener
2016-08-08@00:50:40.111 [brltty] pushed command handler: keycodes
2016-08-08@00:50:40.111 [brltty] report listener registered: 0:
inputCommandDataResetListener
2016-08-08@00:50:40.111 [brltty] pushed command handler: input
2016-08-08@00:50:40.111 [brltty] pushed command handler: navigation
2016-08-08@00:50:40.111 [brltty] pushed command handler: screen
2016-08-08@00:50:40.111 [brltty] pushed command handler: custom
2016-08-08@00:50:40.111 [brltty] pushed command handler: API
2016-08-08@00:50:40.111 [brltty] activity state change: screen-driver:
6[starting]
2016-08-08@00:50:40.112 [brltty] checking for screen driver: lx
2016-08-08@00:50:40.112 [brltty] initializing screen driver: lx
2016-08-08@00:50:40.112 [brltty] device directory: /dev
2016-08-08@00:50:40.112 [brltty] checking screen device: /dev/vcsa
2016-08-08@00:50:40.112 [brltty] screen device: vcsa
2016-08-08@00:50:40.112 [brltty] checking console device: /dev/tty0
2016-08-08@00:50:40.112 [brltty] console device: tty0
2016-08-08@00:50:40.112 [brltty] device opened: /dev/tty1: fd=10
2016-08-08@00:50:40.112 [brltty] device opened: /dev/vcsa: fd=11
2016-08-08@00:50:40.112 [brltty] starting host command: /sbin/modprobe -q uinput
2016-08-08@00:50:40.113 [brltty] host command exit status: 0: /sbin/modprobe
2016-08-08@00:50:40.113 [brltty] activity state change: braille-driver:
6[starting]
2016-08-08@00:50:40.113 [brltty] checking braille device: usb:
2016-08-08@00:50:40.113 [brltty] checking for braille driver: bm
2016-08-08@00:50:40.113 [brltty] initializing braille driver: bm -> usb:
2016-08-08@00:50:40.128 [brltty] USB: Manufacturer Name: BAUM Systeme GmbH
2016-08-08@00:50:40.131 [brltty] USB: Product Description: VarioUltra40
2016-08-08@00:50:40.135 [brltty] USB: Serial Number:
a7af605f-7740-4dae-b329-202daf5ab80d
2016-08-08@00:50:40.174 [brltty] program exit event added:
sorted-usb-serial-adapters
2016-08-08@00:50:40.181 [brltty] probing with Baum HID2 protocol
2016-08-08@00:50:40.202 [brltty] activity state change: speech-driver:
6[starting]
2016-08-08@00:50:40.202 [brltty] no autodetectable speech drivers
2016-08-08@00:50:40.202 [brltty] checking for speech driver: no
2016-08-08@00:50:40.202 [brltty] initializing speech driver: no
2016-08-08@00:50:40.202 [brltty] Speech Driver: no [NoSpeech]
2016-08-08@00:50:40.202 [brltty] NoSpeech Speech Driver:
2016-08-08@00:50:40.202 [brltty] activity state change: speech-driver:
3[started]
2016-08-08@00:50:40.202 [brltty] Baum Device Identity: VarioUltra40
2016-08-08@00:50:40.263 [brltty] Cell Count: 40 (40 text, 0 status)
2016-08-08@00:50:40.468 [brltty] Braille Display Dimensions: 1 row, 40 columns
2016-08-08@00:50:40.468 [brltty] regions: text=0.40 status=0.0
2016-08-08@00:50:40.468 [brltty] shifts: full=40 half=20 vertical=5
2016-08-08@00:50:40.468 [brltty] Key Bindings: ultra
2016-08-08@00:50:40.468 [brltty] program exit event added: sorted-command-table
2016-08-08@00:50:40.469 [brltty] file opened: /etc/brltty/Input/bm/ultra.ktb
fd=21
2016-08-08@00:50:40.469 [brltty] including data file:
/etc/brltty/Input/bm/ultra.ktb
2016-08-08@00:50:40.469 [brltty] file opened: /etc/brltty/Input/bm/display6.kti
fd=22
2016-08-08@00:50:40.469 [brltty] including data file:
/etc/brltty/Input/bm/display6.kti
2016-08-08@00:50:40.469 [brltty] file opened: /etc/brltty/Input/bm/d6.kti fd=23
2016-08-08@00:50:40.469 [brltty] including data file:
/etc/brltty/Input/bm/d6.kti
2016-08-08@00:50:40.469 [brltty] file opened: /etc/brltty/Input/bm/routing6.kti
fd=22
2016-08-08@00:50:40.469 [brltty] including data file:
/etc/brltty/Input/bm/routing6.kti
2016-08-08@00:50:40.469 [brltty] file opened: /etc/brltty/Input/bm/b9b10.kti
fd=22
2016-08-08@00:50:40.469 [brltty] including data file:
/etc/brltty/Input/bm/b9b10.kti
2016-08-08@00:50:40.469 [brltty] file opened: /etc/brltty/Input/bm/keyboard.kti
fd=23
2016-08-08@00:50:40.469 [brltty] including data file:
/etc/brltty/Input/bm/keyboard.kti
2016-08-08@00:50:40.469 [brltty] program exit event added:
sorted-keyboard-functions
2016-08-08@00:50:40.469 [brltty] file opened:
/etc/brltty/Input/bm/../chords.kti fd=24
2016-08-08@00:50:40.469 [brltty] including data file:
/etc/brltty/Input/bm/../chords.kti
2016-08-08@00:50:40.469 [brltty] file opened:
/etc/brltty/Input/bm/../toggle.kti fd=25
2016-08-08@00:50:40.469 [brltty] including data file:
/etc/brltty/Input/bm/../toggle.kti
2016-08-08@00:50:40.469 [brltty] file opened:
/etc/brltty/Input/bm/../toggle.kti fd=25
2016-08-08@00:50:40.469 [brltty] including data file:
/etc/brltty/Input/bm/../toggle.kti
2016-08-08@00:50:40.469 [brltty] file opened:
/etc/brltty/Input/bm/../toggle.kti fd=25
2016-08-08@00:50:40.469 [brltty] including data file:
/etc/brltty/Input/bm/../toggle.kti
2016-08-08@00:50:40.469 [brltty] file opened:
/etc/brltty/Input/bm/../toggle.kti fd=25
2016-08-08@00:50:40.470 [brltty] including data file:
/etc/brltty/Input/bm/../toggle.kti
2016-08-08@00:50:40.470 [brltty] file opened:
/etc/brltty/Input/bm/../toggle.kti fd=25
2016-08-08@00:50:40.470 [brltty] including data file:
/etc/brltty/Input/bm/../toggle.kti
2016-08-08@00:50:40.470 [brltty] file opened:
/etc/brltty/Input/bm/../toggle.kti fd=25
2016-08-08@00:50:40.470 [brltty] including data file:
/etc/brltty/Input/bm/../toggle.kti
2016-08-08@00:50:40.470 [brltty] file opened:
/etc/brltty/Input/bm/../toggle.kti fd=25
2016-08-08@00:50:40.470 [brltty] including data file:
/etc/brltty/Input/bm/../toggle.kti
2016-08-08@00:50:40.470 [brltty] file opened:
/etc/brltty/Input/bm/../toggle.kti fd=25
2016-08-08@00:50:40.470 [brltty] including data file:
/etc/brltty/Input/bm/../toggle.kti
2016-08-08@00:50:40.470 [brltty] file opened:
/etc/brltty/Input/bm/../toggle.kti fd=25
2016-08-08@00:50:40.470 [brltty] including data file:
/etc/brltty/Input/bm/../toggle.kti
2016-08-08@00:50:40.470 [brltty] file opened:
/etc/brltty/Input/bm/../toggle.kti fd=25
2016-08-08@00:50:40.470 [brltty] including data file:
/etc/brltty/Input/bm/../toggle.kti
2016-08-08@00:50:40.470 [brltty] file opened: /etc/brltty/Input/bm/../menu.kti
fd=25
2016-08-08@00:50:40.470 [brltty] including data file:
/etc/brltty/Input/bm/../menu.kti
2016-08-08@00:50:40.473 [brltty] Key Table: /etc/brltty/Input/bm/ultra.ktb
2016-08-08@00:50:40.473 [brltty] constructing special screen: help
2016-08-08@00:50:40.473 [brltty] report listener registered: 0:
brlapi_handleReports
2016-08-08@00:50:40.473 [brltty] Braille Driver: bm [Baum]
2016-08-08@00:50:40.473 [brltty] Baum Braille Driver:
2016-08-08@00:50:40.473 [brltty] Braille Parameter: protocol=
2016-08-08@00:50:40.473 [brltty] Braille Parameter: variokeys=
2016-08-08@00:50:40.473 [brltty] Braille Device: usb:
2016-08-08@00:50:40.473 [brltty] Old Preferences File: /etc/brltty-bm.prefs
2016-08-08@00:50:40.474 [brltty] cannot open file: /etc/brltty-bm.prefs: No
such file or directory
2016-08-08@00:50:40.474 [brltty] regions: text=0.40 status=0.0
2016-08-08@00:50:40.474 [brltty] shifts: full=40 half=20 vertical=5
2016-08-08@00:50:40.474 [brltty] program exit event added: alert-tunes
2016-08-08@00:50:40.474 [brltty] activity state change: braille-driver:
3[started]
2016-08-08@00:50:40.474 [brltty] device opened: /dev/tty0: fd=22
2016-08-08@00:50:40.474 [tune-thread] starting host command: /sbin/modprobe -q
pcspkr
2016-08-08@00:50:40.476 [tune-thread] host command exit status: 0:
/sbin/modprobe
2016-08-08@00:50:40.476 [tune-thread] console opened: fd=21
2016-08-08@00:50:40.476 [tune-thread] program exit event added: console-stream
2016-08-08@00:50:40.476 [tune-thread] beeper enabled
2016-08-08@00:50:40.476 [tune-thread] tone: MSecs:60 Freq:329
2016-08-08@00:50:40.507 [brltty] Baum Serial Number: <private>
2016-08-08@00:50:40.507 [brltty] Baum Device Identity: VarioUltra40
2016-08-08@00:50:40.507 [brltty] Baum Serial Number: <private>
2016-08-08@00:50:40.539 [tune-thread] tone: MSecs:100 Freq:440
2016-08-08@00:50:40.614 [brltty] checking uinput device: /dev/uinput
2016-08-08@00:50:40.614 [brltty] uinput device: uinput
2016-08-08@00:50:40.614 [brltty] device opened: /dev/uinput: fd=23
2016-08-08@00:50:40.614 [brltty] uinput opened: uinput fd=23
2016-08-08@00:50:40.614 [brltty] report listener registered: 1:
lxBrailleOfflineListener
2016-08-08@00:50:40.614 [brltty] Screen Driver: lx [Linux]
2016-08-08@00:50:40.614 [brltty] Linux Screen Driver:
2016-08-08@00:50:40.614 [brltty] Screen Parameter: charset=
2016-08-08@00:50:40.614 [brltty] Screen Parameter: debugsfm=
2016-08-08@00:50:40.614 [brltty] Screen Parameter: hfb=
2016-08-08@00:50:40.614 [brltty] Screen Parameter: vt=
2016-08-08@00:50:40.614 [brltty] activity state change: screen-driver:
3[started]
2016-08-08@00:50:40.614 [brltty] report listener unregistered: 0:
brlapi_handleReports
2016-08-08@00:50:40.614 [brltty] pushed command environment: message
2016-08-08@00:50:40.614 [brltty] pushed command handler: message
2016-08-08@00:50:42.008 [brltty] program exit event added: command-queue
2016-08-08@00:50:42.008 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:42.008 [brltty] popped command handler: message
2016-08-08@00:50:42.008 [brltty] popped command environment: message
2016-08-08@00:50:42.008 [brltty] report listener registered: 0:
brlapi_handleReports
2016-08-08@00:50:42.015 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:42.544 [tune-thread] beeper disabled
2016-08-08@00:50:43.685 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:43.696 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:43.808 [brltty] command: 002209 (PASSDOTS: type braille dots
[14])
2016-08-08@00:50:43.874 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:43.885 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:44.011 [brltty] command: 002209 (PASSDOTS: type braille dots
[14])
2016-08-08@00:50:44.080 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:44.089 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:44.205 [brltty] command: 002209 (PASSDOTS: type braille dots
[14])
2016-08-08@00:50:44.305 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:44.357 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:44.440 [brltty] command: 002209 (PASSDOTS: type braille dots
[14])
2016-08-08@00:50:44.516 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:44.520 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:44.619 [brltty] command: 002209 (PASSDOTS: type braille dots
[14])
2016-08-08@00:50:44.681 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:44.687 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:44.706 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:44.812 [brltty] command: 002219 (PASSDOTS: type braille dots
[145])
2016-08-08@00:50:44.853 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:44.874 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:44.884 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:44.989 [brltty] command: 002219 (PASSDOTS: type braille dots
[145])
2016-08-08@00:50:45.350 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:45.467 [brltty] command: 002002 (KEY_BACKSPACE: backspace key)
2016-08-08@00:50:45.531 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:45.617 [brltty] command: 002002 (KEY_BACKSPACE: backspace key)
2016-08-08@00:50:45.688 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:45.753 [brltty] command: 002002 (KEY_BACKSPACE: backspace key)
2016-08-08@00:50:45.825 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:45.893 [brltty] command: 002002 (KEY_BACKSPACE: backspace key)
2016-08-08@00:50:45.968 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:46.033 [brltty] command: 002002 (KEY_BACKSPACE: backspace key)
2016-08-08@00:50:46.120 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:46.206 [brltty] command: 002002 (KEY_BACKSPACE: backspace key)
2016-08-08@00:50:46.277 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:46.346 [brltty] command: 002002 (KEY_BACKSPACE: backspace key)
2016-08-08@00:50:46.427 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:46.489 [brltty] command: 002002 (KEY_BACKSPACE: backspace key)
2016-08-08@00:50:46.981 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:47.002 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:47.002 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:47.012 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:47.192 [brltty] command: 00221D (PASSDOTS: type braille dots
[1345])
2016-08-08@00:50:47.237 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:47.317 [brltty] command: 002201 (PASSDOTS: type braille dots
[1])
2016-08-08@00:50:47.378 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:47.388 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:47.405 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:47.412 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:47.520 [brltty] command: 00221D (PASSDOTS: type braille dots
[1345])
2016-08-08@00:50:47.571 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:47.593 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:47.603 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:47.703 [brltty] command: 002215 (PASSDOTS: type braille dots
[135])
2016-08-08@00:50:48.438 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:48.570 [brltty] command: 002200 (PASSDOTS: type braille dots
[space])
2016-08-08@00:50:49.450 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:49.589 [brltty] command: 002002 (KEY_BACKSPACE: backspace key)
2016-08-08@00:50:49.650 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:49.752 [brltty] command: 002002 (KEY_BACKSPACE: backspace key)
2016-08-08@00:50:49.817 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:49.879 [brltty] command: 002002 (KEY_BACKSPACE: backspace key)
2016-08-08@00:50:49.945 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:50.033 [brltty] command: 002002 (KEY_BACKSPACE: backspace key)
2016-08-08@00:50:50.119 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:50.197 [brltty] command: 002002 (KEY_BACKSPACE: backspace key)
2016-08-08@00:50:50.269 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:50.347 [brltty] command: 002002 (KEY_BACKSPACE: backspace key)
2016-08-08@00:50:50.713 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:50.771 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:50.984 [brltty] command: 002209 (PASSDOTS: type braille dots
[14])
2016-08-08@00:50:51.063 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:51.081 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:51.103 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:51.220 [brltty] command: 002219 (PASSDOTS: type braille dots
[145])
2016-08-08@00:50:51.387 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:51.507 [brltty] command: 002200 (PASSDOTS: type braille dots
[space])
2016-08-08@00:50:51.666 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:51.676 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:51.837 [brltty] command: 00220C (PASSDOTS: type braille dots
[34])
2016-08-08@00:50:51.947 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:52.093 [brltty] command: 002000 (KEY_ENTER: enter key)
2016-08-08@00:50:54.385 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:54.403 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:54.530 [brltty] command: 002209 (PASSDOTS: type braille dots
[14])
2016-08-08@00:50:54.583 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:54.595 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:54.611 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:54.715 [brltty] command: 002219 (PASSDOTS: type braille dots
[145])
2016-08-08@00:50:54.925 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:55.025 [brltty] command: 002200 (PASSDOTS: type braille dots
[space])
2016-08-08@00:50:55.537 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:55.554 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:55.681 [brltty] command: 002211 (PASSDOTS: type braille dots
[15])
2016-08-08@00:50:55.754 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:55.765 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:55.765 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:55.765 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:55.896 [brltty] command: 00221E (PASSDOTS: type braille dots
[2345])
2016-08-08@00:50:55.947 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:55.957 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:56.067 [brltty] command: 002209 (PASSDOTS: type braille dots
[14])
2016-08-08@00:50:56.327 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:56.414 [brltty] command: 002000 (KEY_ENTER: enter key)
2016-08-08@00:50:56.482 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:56.549 [brltty] command: 002000 (KEY_ENTER: enter key)
2016-08-08@00:50:57.934 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:57.942 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:57.953 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:58.140 [brltty] command: 002219 (PASSDOTS: type braille dots
[145])
2016-08-08@00:50:58.318 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:58.339 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:58.346 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:58.375 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:58.575 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:58.586 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:58.817 [brltty] command: 00223F (PASSDOTS: type braille dots
[123456])
2016-08-08@00:50:59.551 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:59.683 [brltty] command: 002002 (KEY_BACKSPACE: backspace key)
2016-08-08@00:50:59.758 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:59.819 [brltty] command: 002002 (KEY_BACKSPACE: backspace key)
2016-08-08@00:50:59.913 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:50:59.988 [brltty] command: 002002 (KEY_BACKSPACE: backspace key)
2016-08-08@00:51:01.077 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:51:01.106 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:51:01.239 [brltty] command: 002209 (PASSDOTS: type braille dots
[14])
2016-08-08@00:51:01.278 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:51:01.289 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:51:01.306 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:51:01.453 [brltty] command: 002219 (PASSDOTS: type braille dots
[145])
2016-08-08@00:51:01.641 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:51:01.946 [brltty] command: 002200 (PASSDOTS: type braille dots
[space])
2016-08-08@00:51:05.473 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:51:05.489 [brltty] command: 002210 (PASSDOTS: type braille dots
[5])
2016-08-08@00:51:08.097 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:51:08.111 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:51:08.111 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:51:08.111 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:51:08.249 [brltty] command: 00223C (PASSDOTS: type braille dots
[3456])
2016-08-08@00:51:08.353 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:51:08.365 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:51:08.365 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:51:08.403 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:51:08.527 [brltty] command: 00223C (PASSDOTS: type braille dots
[3456])
2016-08-08@00:51:08.588 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:51:08.606 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:51:08.606 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:51:08.709 [brltty] command: 002232 (PASSDOTS: type braille dots
[256])
2016-08-08@00:51:09.427 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:51:09.528 [brltty] command: 002002 (KEY_BACKSPACE: backspace key)
2016-08-08@00:51:09.601 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:51:09.713 [brltty] command: 002002 (KEY_BACKSPACE: backspace key)
2016-08-08@00:51:09.815 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:51:09.909 [brltty] command: 002002 (KEY_BACKSPACE: backspace key)
2016-08-08@00:51:09.973 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:51:10.062 [brltty] command: 002002 (KEY_BACKSPACE: backspace key)
2016-08-08@00:51:10.133 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:51:10.200 [brltty] command: 002002 (KEY_BACKSPACE: backspace key)
2016-08-08@00:51:10.264 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:51:10.352 [brltty] command: 002002 (KEY_BACKSPACE: backspace key)
2016-08-08@00:51:10.392 [brltty] command: 000000 (NOOP: do nothing)
2016-08-08@00:51:10.486 [brltty] command: 002002 (KEY_BACKSPACE: backspace key)
2016-08-08@00:51:15.148 [brltty] USB bulk transfer error 110: Connection timed
out.
2016-08-08@00:51:15.148 [brltty] activity action request: braille-driver: stop
2016-08-08@00:51:15.148 [brltty] activity state change: braille-driver:
9[stopping]
2016-08-08@00:51:15.148 [brltty] report listener unregistered: 0:
brlapi_handleReports
2016-08-08@00:51:15.181 [brltty] activity state change: braille-driver:
0[stopped]
2016-08-08@00:51:15.181 [brltty] reinitializing braille driver
2016-08-08@00:51:15.181 [brltty] activity action request: braille-driver: start
2016-08-08@00:51:15.181 [brltty] activity state change: braille-driver:
4[preparing]
2016-08-08@00:51:15.181 [brltty] Braille Display Dimensions: 1 row, 1 column
2016-08-08@00:51:15.181 [brltty] regions: text=0.1 status=0.0
2016-08-08@00:51:15.181 [brltty] shifts: full=1 half=0 vertical=5
2016-08-08@00:51:15.181 [brltty] activity state change: braille-driver:
1[prepared]
2016-08-08@00:51:15.181 [brltty] activity state change: braille-driver:
2[scheduled]
2016-08-08@00:51:15.181 [tune-thread] beeper enabled
2016-08-08@00:51:15.181 [tune-thread] tone: MSecs:60 Freq:329
2016-08-08@00:51:15.181 [brltty] activity state change: braille-driver:
6[starting]
2016-08-08@00:51:15.181 [brltty] checking braille device: usb:
2016-08-08@00:51:15.181 [brltty] checking for braille driver: bm
2016-08-08@00:51:15.181 [brltty] initializing braille driver: bm -> usb:
2016-08-08@00:51:15.206 [brltty] USB: Manufacturer Name: BAUM Systeme GmbH
2016-08-08@00:51:15.209 [brltty] USB: Product Description: VarioUltra40
2016-08-08@00:51:15.213 [brltty] USB: Serial Number:
a7af605f-7740-4dae-b329-202daf5ab80d
2016-08-08@00:51:15.259 [brltty] probing with Baum HID2 protocol
2016-08-08@00:51:15.262 [tune-thread] tone: MSecs:60 Freq:220
2016-08-08@00:51:15.280 [brltty] Baum Device Identity: VarioUltra40
2016-08-08@00:51:15.345 [brltty] Cell Count: 40 (40 text, 0 status)
2016-08-08@00:51:15.542 [brltty] Braille Display Dimensions: 1 row, 40 columns
2016-08-08@00:51:15.542 [brltty] regions: text=0.40 status=0.0
2016-08-08@00:51:15.542 [brltty] shifts: full=40 half=20 vertical=5
2016-08-08@00:51:15.542 [brltty] Key Bindings: ultra
2016-08-08@00:51:15.543 [brltty] file opened: /etc/brltty/Input/bm/ultra.ktb
fd=24
2016-08-08@00:51:15.543 [brltty] including data file:
/etc/brltty/Input/bm/ultra.ktb
2016-08-08@00:51:15.543 [brltty] file opened: /etc/brltty/Input/bm/display6.kti
fd=25
2016-08-08@00:51:15.543 [brltty] including data file:
/etc/brltty/Input/bm/display6.kti
2016-08-08@00:51:15.543 [brltty] file opened: /etc/brltty/Input/bm/d6.kti fd=26
2016-08-08@00:51:15.543 [brltty] including data file:
/etc/brltty/Input/bm/d6.kti
2016-08-08@00:51:15.544 [brltty] file opened: /etc/brltty/Input/bm/routing6.kti
fd=25
2016-08-08@00:51:15.544 [brltty] including data file:
/etc/brltty/Input/bm/routing6.kti
2016-08-08@00:51:15.544 [brltty] file opened: /etc/brltty/Input/bm/b9b10.kti
fd=25
2016-08-08@00:51:15.544 [brltty] including data file:
/etc/brltty/Input/bm/b9b10.kti
2016-08-08@00:51:15.544 [brltty] file opened: /etc/brltty/Input/bm/keyboard.kti
fd=26
2016-08-08@00:51:15.544 [brltty] including data file:
/etc/brltty/Input/bm/keyboard.kti
2016-08-08@00:51:15.545 [brltty] file opened:
/etc/brltty/Input/bm/../chords.kti fd=27
2016-08-08@00:51:15.545 [brltty] including data file:
/etc/brltty/Input/bm/../chords.kti
2016-08-08@00:51:15.545 [brltty] file opened:
/etc/brltty/Input/bm/../toggle.kti fd=28
2016-08-08@00:51:15.545 [brltty] including data file:
/etc/brltty/Input/bm/../toggle.kti
2016-08-08@00:51:15.545 [brltty] file opened:
/etc/brltty/Input/bm/../toggle.kti fd=28
2016-08-08@00:51:15.545 [brltty] including data file:
/etc/brltty/Input/bm/../toggle.kti
2016-08-08@00:51:15.545 [brltty] file opened:
/etc/brltty/Input/bm/../toggle.kti fd=28
2016-08-08@00:51:15.545 [brltty] including data file:
/etc/brltty/Input/bm/../toggle.kti
2016-08-08@00:51:15.546 [brltty] file opened:
/etc/brltty/Input/bm/../toggle.kti fd=28
2016-08-08@00:51:15.546 [brltty] including data file:
/etc/brltty/Input/bm/../toggle.kti
2016-08-08@00:51:15.546 [brltty] file opened:
/etc/brltty/Input/bm/../toggle.kti fd=28
2016-08-08@00:51:15.546 [brltty] including data file:
/etc/brltty/Input/bm/../toggle.kti
2016-08-08@00:51:15.546 [brltty] file opened:
/etc/brltty/Input/bm/../toggle.kti fd=28
2016-08-08@00:51:15.546 [brltty] including data file:
/etc/brltty/Input/bm/../toggle.kti
2016-08-08@00:51:15.546 [brltty] file opened:
/etc/brltty/Input/bm/../toggle.kti fd=28
2016-08-08@00:51:15.546 [brltty] including data file:
/etc/brltty/Input/bm/../toggle.kti
2016-08-08@00:51:15.547 [brltty] file opened:
/etc/brltty/Input/bm/../toggle.kti fd=28
2016-08-08@00:51:15.547 [brltty] including data file:
/etc/brltty/Input/bm/../toggle.kti
2016-08-08@00:51:15.547 [brltty] file opened:
/etc/brltty/Input/bm/../toggle.kti fd=28
2016-08-08@00:51:15.547 [brltty] including data file:
/etc/brltty/Input/bm/../toggle.kti
2016-08-08@00:51:15.547 [brltty] file opened:
/etc/brltty/Input/bm/../toggle.kti fd=28
2016-08-08@00:51:15.547 [brltty] including data file:
/etc/brltty/Input/bm/../toggle.kti
2016-08-08@00:51:15.547 [brltty] file opened: /etc/brltty/Input/bm/../menu.kti
fd=28
2016-08-08@00:51:15.547 [brltty] including data file:
/etc/brltty/Input/bm/../menu.kti
2016-08-08@00:51:15.552 [brltty] Key Table: /etc/brltty/Input/bm/ultra.ktb
2016-08-08@00:51:15.554 [brltty] report listener registered: 0:
brlapi_handleReports
2016-08-08@00:51:15.554 [brltty] Braille Driver: bm [Baum]
2016-08-08@00:51:15.554 [brltty] Baum Braille Driver:
2016-08-08@00:51:15.555 [brltty] Braille Parameter: protocol=
2016-08-08@00:51:15.555 [brltty] Braille Parameter: variokeys=
2016-08-08@00:51:15.555 [brltty] Braille Device: usb:
2016-08-08@00:51:15.555 [brltty] Old Preferences File: /etc/brltty-bm.prefs
2016-08-08@00:51:15.555 [brltty] cannot open file: /etc/brltty-bm.prefs: No
such file or directory
2016-08-08@00:51:15.555 [brltty] regions: text=0.40 status=0.0
2016-08-08@00:51:15.555 [brltty] shifts: full=40 half=20 vertical=5
2016-08-08@00:51:15.555 [brltty] activity state change: braille-driver:
3[started]
2016-08-08@00:51:15.555 [tune-thread] tone: MSecs:60 Freq:329
2016-08-08@00:51:15.596 [brltty] report listener unregistered: 0:
brlapi_handleReports
2016-08-08@00:51:15.596 [brltty] pushed command environment: message
2016-08-08@00:51:15.596 [brltty] pushed command handler: message
2016-08-08@00:51:15.617 [tune-thread] tone: MSecs:100 Freq:440
2016-08-08@00:51:15.639 [brltty] Baum Serial Number: <private>
2016-08-08@00:51:15.639 [brltty] Baum Device Identity: VarioUltra40
2016-08-08@00:51:15.639 [brltty] Baum Serial Number: <private>
2016-08-08@00:51:17.619 [tune-thread] beeper disabled
2016-08-08@00:51:19.649 [brltty] popped command handler: message
2016-08-08@00:51:19.649 [brltty] popped command environment: message
2016-08-08@00:51:19.649 [brltty] report listener registered: 0:
brlapi_handleReports
2016-08-08@00:51:20.652 [brltty] USB bulk transfer error 110: Connection timed
out.
2016-08-08@00:51:20.653 [brltty] activity action request: braille-driver: stop
2016-08-08@00:51:20.653 [brltty] activity state change: braille-driver:
9[stopping]
2016-08-08@00:51:20.653 [brltty] report listener unregistered: 0:
brlapi_handleReports
2016-08-08@00:51:20.689 [tune-thread] beeper enabled
2016-08-08@00:51:20.689 [tune-thread] tone: MSecs:60 Freq:329
2016-08-08@00:51:20.689 [brltty] activity state change: braille-driver:
0[stopped]
2016-08-08@00:51:20.689 [brltty] reinitializing braille driver
2016-08-08@00:51:20.689 [brltty] activity action request: braille-driver: start
2016-08-08@00:51:20.689 [brltty] activity state change: braille-driver:
4[preparing]
2016-08-08@00:51:20.689 [brltty] Braille Display Dimensions: 1 row, 1 column
2016-08-08@00:51:20.689 [brltty] regions: text=0.1 status=0.0
2016-08-08@00:51:20.689 [brltty] shifts: full=1 half=0 vertical=5
2016-08-08@00:51:20.689 [brltty] activity state change: braille-driver:
1[prepared]
2016-08-08@00:51:20.689 [brltty] activity state change: braille-driver:
2[scheduled]
2016-08-08@00:51:20.689 [brltty] activity state change: braille-driver:
6[starting]
2016-08-08@00:51:20.689 [brltty] checking braille device: usb:
2016-08-08@00:51:20.689 [brltty] checking for braille driver: bm
2016-08-08@00:51:20.689 [brltty] initializing braille driver: bm -> usb:
2016-08-08@00:51:20.693 [brltty] USB: Manufacturer Name: BAUM Systeme GmbH
2016-08-08@00:51:20.697 [brltty] USB: Product Description: VarioUltra40
2016-08-08@00:51:20.700 [brltty] USB: Serial Number:
a7af605f-7740-4dae-b329-202daf5ab80d
2016-08-08@00:51:20.746 [brltty] probing with Baum HID2 protocol
2016-08-08@00:51:20.753 [tune-thread] tone: MSecs:60 Freq:220
2016-08-08@00:51:20.767 [brltty] Baum Device Identity: VarioUltra40
2016-08-08@00:51:20.845 [brltty] Cell Count: 40 (40 text, 0 status)
2016-08-08@00:51:21.033 [brltty] Braille Display Dimensions: 1 row, 40 columns
2016-08-08@00:51:21.033 [brltty] regions: text=0.40 status=0.0
2016-08-08@00:51:21.033 [brltty] shifts: full=40 half=20 vertical=5
2016-08-08@00:51:21.033 [brltty] Key Bindings: ultra
2016-08-08@00:51:21.033 [brltty] file opened: /etc/brltty/Input/bm/ultra.ktb
fd=24
2016-08-08@00:51:21.033 [brltty] including data file:
/etc/brltty/Input/bm/ultra.ktb
2016-08-08@00:51:21.033 [brltty] file opened: /etc/brltty/Input/bm/display6.kti
fd=25
2016-08-08@00:51:21.033 [brltty] including data file:
/etc/brltty/Input/bm/display6.kti
2016-08-08@00:51:21.033 [brltty] file opened: /etc/brltty/Input/bm/d6.kti fd=26
2016-08-08@00:51:21.033 [brltty] including data file:
/etc/brltty/Input/bm/d6.kti
2016-08-08@00:51:21.033 [brltty] file opened: /etc/brltty/Input/bm/routing6.kti
fd=25
2016-08-08@00:51:21.033 [brltty] including data file:
/etc/brltty/Input/bm/routing6.kti
2016-08-08@00:51:21.033 [brltty] file opened: /etc/brltty/Input/bm/b9b10.kti
fd=25
2016-08-08@00:51:21.033 [brltty] including data file:
/etc/brltty/Input/bm/b9b10.kti
2016-08-08@00:51:21.034 [brltty] file opened: /etc/brltty/Input/bm/keyboard.kti
fd=26
2016-08-08@00:51:21.034 [brltty] including data file:
/etc/brltty/Input/bm/keyboard.kti
2016-08-08@00:51:21.034 [brltty] file opened:
/etc/brltty/Input/bm/../chords.kti fd=27
2016-08-08@00:51:21.034 [brltty] including data file:
/etc/brltty/Input/bm/../chords.kti
2016-08-08@00:51:21.034 [brltty] file opened:
/etc/brltty/Input/bm/../toggle.kti fd=28
2016-08-08@00:51:21.034 [brltty] including data file:
/etc/brltty/Input/bm/../toggle.kti
2016-08-08@00:51:21.034 [brltty] file opened:
/etc/brltty/Input/bm/../toggle.kti fd=28
2016-08-08@00:51:21.034 [brltty] including data file:
/etc/brltty/Input/bm/../toggle.kti
2016-08-08@00:51:21.034 [brltty] file opened:
/etc/brltty/Input/bm/../toggle.kti fd=28
2016-08-08@00:51:21.034 [brltty] including data file:
/etc/brltty/Input/bm/../toggle.kti
2016-08-08@00:51:21.034 [brltty] file opened:
/etc/brltty/Input/bm/../toggle.kti fd=28
2016-08-08@00:51:21.034 [brltty] including data file:
/etc/brltty/Input/bm/../toggle.kti
2016-08-08@00:51:21.034 [brltty] file opened:
/etc/brltty/Input/bm/../toggle.kti fd=28
2016-08-08@00:51:21.034 [brltty] including data file:
/etc/brltty/Input/bm/../toggle.kti
2016-08-08@00:51:21.034 [brltty] file opened:
/etc/brltty/Input/bm/../toggle.kti fd=28
2016-08-08@00:51:21.034 [brltty] including data file:
/etc/brltty/Input/bm/../toggle.kti
2016-08-08@00:51:21.034 [brltty] file opened:
/etc/brltty/Input/bm/../toggle.kti fd=28
2016-08-08@00:51:21.034 [brltty] including data file:
/etc/brltty/Input/bm/../toggle.kti
2016-08-08@00:51:21.034 [brltty] file opened:
/etc/brltty/Input/bm/../toggle.kti fd=28
2016-08-08@00:51:21.034 [brltty] including data file:
/etc/brltty/Input/bm/../toggle.kti
2016-08-08@00:51:21.034 [brltty] file opened:
/etc/brltty/Input/bm/../toggle.kti fd=28
2016-08-08@00:51:21.034 [brltty] including data file:
/etc/brltty/Input/bm/../toggle.kti
2016-08-08@00:51:21.034 [brltty] file opened:
/etc/brltty/Input/bm/../toggle.kti fd=28
2016-08-08@00:51:21.034 [brltty] including data file:
/etc/brltty/Input/bm/../toggle.kti
2016-08-08@00:51:21.035 [brltty] file opened: /etc/brltty/Input/bm/../menu.kti
fd=28
2016-08-08@00:51:21.035 [brltty] including data file:
/etc/brltty/Input/bm/../menu.kti
2016-08-08@00:51:21.037 [brltty] Key Table: /etc/brltty/Input/bm/ultra.ktb
2016-08-08@00:51:21.038 [brltty] report listener registered: 0:
brlapi_handleReports
2016-08-08@00:51:21.038 [brltty] Braille Driver: bm [Baum]
2016-08-08@00:51:21.038 [brltty] Baum Braille Driver:
2016-08-08@00:51:21.038 [brltty] Braille Parameter: protocol=
2016-08-08@00:51:21.038 [brltty] Braille Parameter: variokeys=
2016-08-08@00:51:21.038 [brltty] Braille Device: usb:
2016-08-08@00:51:21.038 [brltty] Old Preferences File: /etc/brltty-bm.prefs
2016-08-08@00:51:21.038 [brltty] cannot open file: /etc/brltty-bm.prefs: No
such file or directory
2016-08-08@00:51:21.038 [brltty] regions: text=0.40 status=0.0
2016-08-08@00:51:21.038 [brltty] shifts: full=40 half=20 vertical=5
2016-08-08@00:51:21.038 [brltty] activity state change: braille-driver:
3[started]
2016-08-08@00:51:21.038 [brltty] stopping program components
2016-08-08@00:51:21.038 [brltty] stopping program component: command-queue
2016-08-08@00:51:21.038 [brltty] stopping program component: console-stream
2016-08-08@00:51:21.038 [brltty] stopping program component: alert-tunes
2016-08-08@00:51:21.039 [tune-thread] tone: MSecs:60 Freq:329
2016-08-08@00:51:21.039 [brltty] report listener unregistered: 0:
brlapi_handleReports
2016-08-08@00:51:21.039 [brltty] pushed command environment: message
2016-08-08@00:51:21.039 [brltty] pushed command handler: message
2016-08-08@00:51:21.039 [tune-thread] console opened: fd=21
2016-08-08@00:51:21.039 [tune-thread] program exit event added: console-stream
2016-08-08@00:51:21.069 [brltty] Baum Serial Number: <private>
2016-08-08@00:51:21.069 [brltty] Baum Device Identity: VarioUltra40
2016-08-08@00:51:21.069 [brltty] Baum Serial Number: <private>
2016-08-08@00:51:21.101 [tune-thread] tone: MSecs:100 Freq:440
2016-08-08@00:51:23.105 [tune-thread] beeper disabled
2016-08-08@00:51:25.078 [brltty] popped command handler: message
2016-08-08@00:51:25.078 [brltty] popped command environment: message
2016-08-08@00:51:25.078 [brltty] report listener registered: 0:
brlapi_handleReports
2016-08-08@00:51:25.078 [brltty] stopping program component: console-stream
2016-08-08@00:51:25.078 [brltty] stopping program component:
sorted-keyboard-functions
2016-08-08@00:51:25.078 [brltty] stopping program component:
sorted-command-table
2016-08-08@00:51:25.078 [brltty] stopping program component:
sorted-usb-serial-adapters
2016-08-08@00:51:25.078 [brltty] stopping program component: sessions
2016-08-08@00:51:25.078 [brltty] popped command handler: API
2016-08-08@00:51:25.078 [brltty] popped command handler: custom
2016-08-08@00:51:25.078 [brltty] popped command handler: screen
2016-08-08@00:51:25.078 [brltty] popped command handler: navigation
2016-08-08@00:51:25.078 [brltty] popped command handler: input
2016-08-08@00:51:25.078 [brltty] report listener unregistered: 0:
inputCommandDataResetListener
2016-08-08@00:51:25.078 [brltty] popped command handler: keycodes
2016-08-08@00:51:25.078 [brltty] report listener unregistered: 0:
keycodeCommandDataResetListener
2016-08-08@00:51:25.078 [brltty] popped command handler: touch
2016-08-08@00:51:25.078 [brltty] report listener unregistered: 3:
brailleWindowUpdatedListener
2016-08-08@00:51:25.078 [brltty] popped command handler: toggle
2016-08-08@00:51:25.078 [brltty] popped command handler: preferences
2016-08-08@00:51:25.078 [brltty] popped command handler: clipboard
2016-08-08@00:51:25.078 [brltty] popped command handler: speech
2016-08-08@00:51:25.078 [brltty] popped command handler: learn
2016-08-08@00:51:25.078 [brltty] popped command handler: miscellaneous
2016-08-08@00:51:25.078 [brltty] popped command handler: unhandled
2016-08-08@00:51:25.078 [brltty] popped command environment: main
2016-08-08@00:51:25.078 [brltty] stopping program component: speech-driver
2016-08-08@00:51:25.078 [brltty] activity action request: speech-driver: stop
2016-08-08@00:51:25.078 [brltty] activity state change: speech-driver:
9[stopping]
2016-08-08@00:51:25.079 [brltty] activity state change: speech-driver:
0[stopped]
2016-08-08@00:51:25.079 [brltty] stopping program component: speech-data
2016-08-08@00:51:25.079 [brltty] stopping program component: braille-driver
2016-08-08@00:51:25.079 [brltty] report listener unregistered: 0:
brlapi_handleReports
2016-08-08@00:51:25.079 [brltty] pushed command environment: message
2016-08-08@00:51:25.079 [brltty] pushed command handler: message
2016-08-08@00:51:25.437 [brltty] popped command handler: message
2016-08-08@00:51:25.437 [brltty] popped command environment: message
2016-08-08@00:51:25.437 [brltty] report listener registered: 0:
brlapi_handleReports
2016-08-08@00:51:25.437 [brltty] activity action request: braille-driver: stop
2016-08-08@00:51:25.437 [brltty] activity state change: braille-driver:
9[stopping]
2016-08-08@00:51:25.437 [brltty] report listener unregistered: 0:
brlapi_handleReports
2016-08-08@00:51:25.472 [brltty] program exit event added: alert-tunes
2016-08-08@00:51:25.472 [brltty] activity state change: braille-driver:
0[stopped]
2016-08-08@00:51:25.472 [brltty] stopping program component: alert-tunes
2016-08-08@00:51:25.472 [tune-thread] console opened: fd=12
2016-08-08@00:51:25.472 [tune-thread] program exit event added: console-stream
2016-08-08@00:51:25.472 [tune-thread] beeper enabled
2016-08-08@00:51:25.472 [tune-thread] tone: MSecs:60 Freq:329
2016-08-08@00:51:25.533 [tune-thread] tone: MSecs:60 Freq:220
2016-08-08@00:51:25.597 [brltty] stopping program component: console-stream
2016-08-08@00:51:25.597 [brltty] stopping program component: braille-data
2016-08-08@00:51:25.597 [brltty] stopping program component: api-server
2016-08-08@00:51:25.597 [server-main] select: Interrupted system call
2016-08-08@00:51:25.598 [brltty] stopping program component: address-table
2016-08-08@00:51:25.598 [brltty] stopping program component: screen-driver
2016-08-08@00:51:25.598 [brltty] activity action request: screen-driver: stop
2016-08-08@00:51:25.598 [brltty] activity state change: screen-driver:
9[stopping]
2016-08-08@00:51:25.598 [brltty] report listener unregistered: 1:
lxBrailleOfflineListener
2016-08-08@00:51:25.714 [brltty] activity state change: screen-driver:
0[stopped]
2016-08-08@00:51:25.714 [brltty] stopping program component: keyboard-table
2016-08-08@00:51:25.714 [brltty] stopping program component: contraction-table
2016-08-08@00:51:25.714 [brltty] stopping program component: attributes-table
2016-08-08@00:51:25.714 [brltty] stopping program component: text-table
2016-08-08@00:51:25.714 [brltty] stopping program component: tunes
2016-08-08@00:51:25.714 [tune-thread] beeper disabled
2016-08-08@00:51:25.714 [tune-thread] tune thread state change: 3 -> 4
2016-08-08@00:51:25.714 [brltty] tune thread state change: 4 -> 5
2016-08-08@00:51:25.714 [brltty] stopping program component: screen-data
2016-08-08@00:51:25.714 [brltty] destructing special screen: help
2016-08-08@00:51:25.714 [brltty] stopping program component: log
_______________________________________________
This message was sent via the BRLTTY mailing list.
To post a message, send an e-mail to: BRLTTY@mielke.cc
For general information, go to: http://mielke.cc/mailman/listinfo/brltty
