Hi, It seems that Thomas provided here as much information as he can. Maybe none had time too take care of this problem. Maybe we can try to have this braille sense work on the usb port on another machine ?
P. From: Thomas Fauvel <thomas.fauvel...@gmail.com> Subject: Re: [BRLTTY] HIMS Braille Sense does not work Date: Wed, 28 Mar 2012 20:02:15 +0200 > The braille sense works when I connect by the serial port. > lsusb1.log without brltty and braille sense > lsusb1-bs.log without brltty and with braille sense > lsusb2.log with brltty ans without braille sense > lsusb2-bs.log with brltty and braille sense > > Le 26 mars 2012 22:35, Samuel Thibault <samuel.thiba...@ens-lyon.org> a > écrit : > >> Thomas Fauvel, le Mon 26 Mar 2012 19:37:03 +0200, a écrit : >> > The file lsusb-bs.log is with braille sense. >> >> Ok, so it's 045e:930a. It however does not show up among other USB >> devices in the brltty logs, so there must be something wrong in the USB >> stack somewhere. Before running brltty, make sure that 045e:930a shows >> up in the output of lsusb (no need for -v). If it does not, check the >> tail of the output of dmesg for potential USB hub errors or some such. >> >> Samuel >> > > > > -- > ___________________________________________________________________ > Thomas Fauvel : Etudiant U-psud, Tel° ; 06.70.42.91.15 > e-mail : thomas.fauvel...@gmail.com , thomas.fau...@u-psud.fr > Site Web : https://sites.google.com/site/thomasfauvel95. > ___________________________________________________________________ _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: BRLTTY@mielke.cc For general information, go to: http://mielke.cc/mailman/listinfo/brltty
