[quoted lines by Rob Meredith on 2008/08/22 at 10:27 -0400]
>Knowing that you implemented supporting using the Braille Connect 12 explains
>a lot,
We made a very conscious decision that it was better to support dots 7 and 8
than to have extra space bars.
>I would be glad to help you determine what codes are sent for the specific dot
>7 and 8 keys on the Connect 24, but I need pretty specific instructions!
No problem. Why not try guessing first, though. Could you please try the
attached patch (baum-dots78-1.patch) and let me know if it works? I don't know
which revision of brltty you're using. This patch is against the development
stream but should also work for release 3.10.
--
Dave Mielke | 2213 Fox Crescent | I believe that the Bible is the
Phone: 1-613-726-0014 | Ottawa, Ontario | Word of God. Please contact me
EMail: [EMAIL PROTECTED] | Canada K2A 1H7 | if you're concerned about Hell.
http://FamilyRadio.com/ | http://Mielke.cc/bible/
Index: BrailleDrivers/Baum/braille.c
===================================================================
--- BrailleDrivers/Baum/braille.c (revision 3915)
+++ BrailleDrivers/Baum/braille.c (working copy)
@@ -447,23 +447,25 @@
#define BAUM_KEY_BLU BAUM_KEY(0X20, BACK6)
#define BAUM_SHIFT_DOT (BAUM_SHIFT_BACK10A + BAUM_WIDTH_BACK10A)
-#define BAUM_WIDTH_DOT 6
+#define BAUM_WIDTH_DOT 8
#define BAUM_KEY_DOT1 BAUM_KEY(0X01, DOT)
#define BAUM_KEY_DOT2 BAUM_KEY(0X02, DOT)
#define BAUM_KEY_DOT3 BAUM_KEY(0X04, DOT)
#define BAUM_KEY_DOT4 BAUM_KEY(0X08, DOT)
#define BAUM_KEY_DOT5 BAUM_KEY(0X10, DOT)
#define BAUM_KEY_DOT6 BAUM_KEY(0X20, DOT)
+#define BAUM_KEY_DOT7 BAUM_KEY(0X40, DOT)
+#define BAUM_KEY_DOT8 BAUM_KEY(0X80, DOT)
#define BAUM_SHIFT_BUTTON (BAUM_SHIFT_DOT + BAUM_WIDTH_DOT)
-#define BAUM_WIDTH_BUTTON 8
-#define BAUM_KEY_B9 BAUM_KEY(0X01, BUTTON)
-#define BAUM_KEY_B0 BAUM_KEY(0X02, BUTTON)
-#define BAUM_KEY_B11 BAUM_KEY(0X04, BUTTON)
-#define BAUM_KEY_F1 BAUM_KEY(0X10, BUTTON)
-#define BAUM_KEY_F2 BAUM_KEY(0X20, BUTTON)
-#define BAUM_KEY_F3 BAUM_KEY(0X40, BUTTON)
-#define BAUM_KEY_F4 BAUM_KEY(0X80, BUTTON)
+#define BAUM_WIDTH_BUTTON 7
+#define BAUM_KEY_F1 BAUM_KEY(0X01, BUTTON)
+#define BAUM_KEY_F2 BAUM_KEY(0X02, BUTTON)
+#define BAUM_KEY_F3 BAUM_KEY(0X04, BUTTON)
+#define BAUM_KEY_F4 BAUM_KEY(0X08, BUTTON)
+#define BAUM_KEY_B9 BAUM_KEY(0X10, BUTTON)
+#define BAUM_KEY_B0 BAUM_KEY(0X20, BUTTON)
+#define BAUM_KEY_B11 BAUM_KEY(0X40, BUTTON)
#define BAUM_SHIFT_JOYSTICK (BAUM_SHIFT_BUTTON + BAUM_WIDTH_BUTTON)
#define BAUM_WIDTH_JOYSTICK 5
@@ -2207,6 +2209,7 @@
} else if (routingKeyCount == 0) {
if (keys && (keys == (keys & (BAUM_KEY_DOT1 | BAUM_KEY_DOT2 |
BAUM_KEY_DOT3 |
BAUM_KEY_DOT4 | BAUM_KEY_DOT5 |
BAUM_KEY_DOT6 |
+ BAUM_KEY_DOT7 | BAUM_KEY_DOT8 |
BAUM_KEY_B9 | BAUM_KEY_B0)))) {
command = BRL_BLK_PASSDOTS;
#define DOT(dot,key) if (keys & BAUM_KEY_##key) command |= BRL_DOT##dot
@@ -2216,6 +2219,8 @@
DOT(4, DOT4);
DOT(5, DOT5);
DOT(6, DOT6);
+ DOT(7, DOT7);
+ DOT(8, DOT8);
DOT(7, B9);
DOT(8, B0);
#undef DOT
_______________________________________________
This message was sent via the BRLTTY mailing list.
To post a message, send an e-mail to: BRLTTY@mielke.cc
For general information, go to: http://mielke.cc/mailman/listinfo/brltty
