Jason White <[EMAIL PROTECTED]> writes: > If, as I suspect, it is writing to the correct device, there may be a kernel > issue.
I've also seen usb-to-serial adaptors that did not fully support the serial port standard -- which do not work with certain serial braille displays (I think it was something related to the RTS/CTS lines, but I might be forgetting things[1]). If you can, try to swap your serial adaptor with another brand, as a last resort. [1] I've been using serial ports back in the old days where BBS (Bulletin-Board-Systems) and FidoNet were still alive and well. I once knew most of the AT command set by heart, and many strange facts about serial lines. Apparently, this knowledge is going down the drain by not being used anymore, probably for the better. Serial ports can be a real PITA, especially when it comes to finding the right cable for a particular task. -- CYa, ⡍⠁⠗⠊⠕ | Debian Developer <URL:http://debian.org/> .''`. | Get my public key via finger mlang/[EMAIL PROTECTED] : :' : | 1024D/7FC1A0854909BCCDBE6C102DDFFC022A6B113E44 `. `' `- <URL:http://delysid.org/> <URL:http://www.staff.tugraz.at/mlang/> _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: BRLTTY@mielke.cc For general information, go to: http://mielke.cc/mailman/listinfo/brltty
