On Tuesday, February 11, 2025 3:10:14 PM CET Turritopsis Dohrnii Teo En Ming wrote: > I had considered getting Raspberry Pi before. But the problem is that the > device supports only 1 network card. > > Regards, > > Mr. Turritopsis Dohrnii Teo En Ming > Targeted Individuals in Singapore
There is always the option to pick something like a Banana Pi R4 (a router board) instead, but you might want to ask yourself why you need it. It's a common trope among "big server men" to want dozens of cores, terabytes of memory and petabytes of storage for dozens of ports... But on the handful of machines I do have multiple NICs on, I never use them. They don't tend to fail to the point of needing redundancy IME, and dumb switches on a UPS never really fail for me either. But for things like clustered storage, there is a case to be made for a dedicated set of lines just for that, for performance's sake. Probably not something you should concern yourself with at this point though. There is, however, something to be said about your uplink to the internet, as well as your power lines. On one of my travels, I had construction workers ram their shovels into the telephone lines (Belgium's national network situation is rather terrible). Let's just say that I was not pleased. It was eventually resolved, but raised the question about the merits of 4G failover. Generally speaking, start small and see which failures occur in your environment and why. Then progressively address them as they happen. Helps to establish rationale for what you build and why. -- Met vriendelijke groet, Michael De Roover Mail: i...@nixmagic.com Web: michael.de.roover.eu.org -- Visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information. bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users
