Dear Michal, Again, thank you very much for your information and advice, which is most appreciated.
As I only have a couple of Centos 6 servers remaining which do not use DNSTAP, I got things working by using rpmbuild with "--without dnstap" which worked very well for me. Purely out of curiosity, I did try building libevent which failed miserably:- >[root@li1523-85 ~]# rpmbuild --rebuild --define 'dist .el6' --without scl >isc-bind-libevent-2.1.8-6.el6.src.rpm >Installing isc-bind-libevent-2.1.8-6.el6.src.rpm >warning: InstallSourcePackage at: psm.c:244: Header V3 RSA/SHA1 Signature, key >ID 4168cd93: NOKEY >warning: user mockbuild does not exist - using root >warning: group mock does not exist - using root >warning: user mockbuild does not exist - using root >warning: group mock does not exist - using root >warning: user mockbuild does not exist - using root >warning: group mock does not exist - using root >Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.i9w0GF >+ umask 022 >+ cd /root/rpmbuild/BUILD >+ LANG=C >+ export LANG >+ unset DISPLAY >+ cd /root/rpmbuild/BUILD >+ rm -rf isc-bind-libevent-2.1.8-stable >+ /usr/bin/gzip -dc /root/rpmbuild/SOURCES/libevent-2.1.8-stable.tar.gz >+ /bin/tar -xf - >+ STATUS=0 >+ '[' 0 -ne 0 ']' >+ cd isc-bind-libevent-2.1.8-stable >/var/tmp/rpm-tmp.i9w0GF: line 38: cd: isc-bind-libevent-2.1.8-stable: No such >file or directory >error: Bad exit status from /var/tmp/rpm-tmp.i9w0GF (%prep) > > >RPM build errors: > InstallSourcePackage at: psm.c:244: Header V3 RSA/SHA1 Signature, key ID > 4168cd93: NOKEY > user mockbuild does not exist - using root > group mock does not exist - using root > user mockbuild does not exist - using root > group mock does not exist - using root > user mockbuild does not exist - using root > group mock does not exist - using root > Bad exit status from /var/tmp/rpm-tmp.i9w0GF (%prep) >[root@li1523-85 ~]# ls /root/rpmbuild/BUILD >libevent-2.1.8-stable >[root@li1523-85 ~]# ls /root/rpmbuild/SOURCES >libevent-2.1.8-stable.tar.gz libevent-nonettests.patch >[root@li1523-85 ~]# For my part, I am not concerned about this as I am not using DNSTAP and only mention the issue in case others encounter it. Best wishes, Matthew ------ >From: Micha? K?pie? <mic...@isc.org> >To: Matthew Richardson <matthe...@itconsult.co.uk> >Cc: bind-users@lists.isc.org >Date: Mon, 27 May 2019 13:12:36 +0200 >Subject: Re: isc-bind-esv Repository - "yum update" doing undesirable things! >> Thank you for your most helpful advice. On Centos 7, I have easily managed >> to build the non-scl packages using the following method starting with a >> default Centos 7 (I was using Linode) logged in as root:- >> >> (...) >> >> However, my luck is not quite as good with Centos 6 where my method is >> similar:- >> >> (...) >> >> but the rpmbuild fails due to a couple of missing dependencies:- >> >> (...) > >What you are observing is one of the reasons we decided to provide our >own packages - namely, that building BIND with dnstap support on a >platform which does not readily supply all relevant build requirements >is a bit of a pain in the neck. The reason your CentOS 7 build >succeeded is that EPEL 7 contains the required build dependencies for >dnstap support in BIND; EPEL 6 lacks these and thus the build fails. > >> Thus far, I have failed on Centos 6 to identify how or where to install >> these two depedencies, for which I would ideally like a package rather than >> compiling from source. > >You have two options here: > > - build without dnstap support, by using "--without dnstap", > > - make the build requirements available in the build environment, most > likely by first building them from source as well (you can use the > SRPMs in our Coprs for convenience), in this order: > > 1. libevent > 2. fstrm > 3. protobuf > 4. protobuf-c > >> I have tried (what I thought was obvious) of >> installing the current Centos 6 Copr packages on the build machine, but >> that did not assist. > >The development packages in our Coprs can only be used for building a >Software Collection [1]. Thus, installing them as they are will not >allow you to compile a non-SCL version of BIND with dnstap support. > >Hope this helps! > >[1]: unless you rebuild them using "--without scl", of course _______________________________________________ Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users
