Am I correct in understanding that the change to "enabled by default" was in 9.9.x, not in 9.8.x? The 9.9.x specifically states that is enabled by default whereas the 9.8.x documentation does not.
-----Original Message----- From: Lawrence K. Chen, P.Eng. [mailto:lkc...@ksu.edu] Sent: Tuesday, January 14, 2014 11:47 AM To: bind-users@lists.isc.org Subject: Re: Upgrading from 9.8.3 to 9.9.4 IIRC, The main change I ran into when I upgraded to 9.9.2-P1 (from 9.7.6-P4) was the change in default for empty-zones. All are enabled by default, including RFC1918 ranges whether you have any defined or not. On 01/14/14 12:16, Mike Bernhardt wrote: > Is there anything I need to know regarding changes in default > operation when upgrading from 9.8.3 to 9.9.4? I'm specifically looking > for changes that must be addressed in named.conf options in order to > keep an upgrade as transparent as possible. > > Thanks, > > Mike > > _______________________________________________ > Please visit https://lists.isc.org/mailman/listinfo/bind-users to > unsubscribe from this list > > bind-users mailing list > bind-users@lists.isc.org > https://lists.isc.org/mailman/listinfo/bind-users > -- Who: Lawrence K. Chen, P.Eng. - W0LKC - Sr. Unix Systems Administrator For: Enterprise Server Technologies (EST) -- & SafeZone Ally _______________________________________________ Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users