Good call out. I'd always enabled empty-zones so didn't get bit by that, but do think the move to 9.9 is when masterfile-format bit some. Not a big deal if you're aware of it. Other than that the upgrade as quick and painless. I would suggest testing the upgrade on a VM or somewhere first...always good to confirm for your exact configuration.
-----Original Message----- From: "<Lawrence K. Chen>", "P.Eng." <lkc...@ksu.edu> Organization: Kansas State University - ITS/Enterprise Server Technologies Date: Tuesday, January 14, 2014 2:46 PM To: "bind-users@lists.isc.org" <bind-users@lists.isc.org> Subject: Re: Upgrading from 9.8.3 to 9.9.4 >IIRC, The main change I ran into when I upgraded to 9.9.2-P1 (from >9.7.6-P4) was the change in default for empty-zones. All are enabled by >default, including RFC1918 ranges whether you have any defined or not. > >On 01/14/14 12:16, Mike Bernhardt wrote: >> Is there anything I need to know regarding changes in default operation >>when >> upgrading from 9.8.3 to 9.9.4? I'm specifically looking for changes that >> must be addressed in named.conf options in order to keep an upgrade as >> transparent as possible. >> >> Thanks, >> >> Mike >> >> _______________________________________________ >> Please visit https://lists.isc.org/mailman/listinfo/bind-users to >>unsubscribe from this list >> >> bind-users mailing list >> bind-users@lists.isc.org >> https://lists.isc.org/mailman/listinfo/bind-users >> > >-- >Who: Lawrence K. Chen, P.Eng. - W0LKC - Sr. Unix Systems Administrator >For: Enterprise Server Technologies (EST) -- & SafeZone Ally >_______________________________________________ >Please visit https://lists.isc.org/mailman/listinfo/bind-users to >unsubscribe from this list > >bind-users mailing list >bind-users@lists.isc.org >https://lists.isc.org/mailman/listinfo/bind-users _______________________________________________ Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users
