Hello,
please configure your mailer to wrap lines below 80 characters per line.
72 to 75 is usually OK.
Thank you.
On 02.03.10 14:02, Fuat Demir (Garanti Teknoloji) wrote:
> I have 2 slave 1 master server.
> master is located in different subnet from the slaves.
> Lets say, 10.1.1.1 (ns1) and 10.1.1.2 (ns2) are the real ip addresses of the
> slaves which have public NAT address for allowing queries from internet for
> authoritive zones. These public address lets say 1.1.1.1 (ns1) and 1.1.1.2
> (ns2).
> In conf file of slaves i have a statement that "notify no".
where? in the options {} statement? in the view {} statements? Or in the
zone {} statement for xxx.com?
> When i configured conf file and reconfigure in slaves, i see transfer logs
> like this,
>
> in the xfer log of ns1, it says "notify: info: client 1.1.1.2#25998: received
> notify for zone 'xxx.com'
>
> in the xfer log of ns2, it says "notify: info: client 1.1.1.1#25998: received
> notify for zone 'xxx.com'
>
> Please note that, ns1 recieves notify form the public address of ns2 and ns2
> recieves notify from the public address of ns1.
> In both slave server, domain names for ns1 and ns2 are the public addresses
> of itselves.
check all notify settings in config file. Maybe the one you see is not the
one that applies.
--
Matus UHLAR - fantomas, [email protected] ; http://www.fantomas.sk/
Warning: I wish NOT to receive e-mail advertising to this address.
Varovanie: na tuto adresu chcem NEDOSTAVAT akukolvek reklamnu postu.
BSE = Mad Cow Desease ... BSA = Mad Software Producents Desease
_______________________________________________
bind-users mailing list
[email protected]
https://lists.isc.org/mailman/listinfo/bind-users
