Comments interspersed below...
On Jun 29, 2009, at 5:42 PM, Mark Andrews wrote:
Hi Mark, thanks for the reply. I do not understand your last
suggestion. If the domain in question is customtruckgraphics.us, can
you show me an example of how to do this?
% dig ns us
; <<>> DiG 9.3.6-P1 <<>> ns us
;; global options: printcmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 38654
;; flags: qr rd ra; QUERY: 1, ANSWER: 6, AUTHORITY: 0, ADDITIONAL: 6
;; QUESTION SECTION:
;us. IN NS
;; ANSWER SECTION:
us. 518400 IN NS a.gtld.biz.
us. 518400 IN NS i.gtld.biz.
us. 518400 IN NS c.gtld.biz.
us. 518400 IN NS b.gtld.biz.
us. 518400 IN NS j.gtld.biz.
us. 518400 IN NS k.gtld.biz.
;; ADDITIONAL SECTION:
a.gtld.biz. 516703 IN A 209.173.53.162
b.gtld.biz. 516685 IN A 209.173.57.162
c.gtld.biz. 516677 IN A 209.173.60.65
i.gtld.biz. 516687 IN A 156.154.96.126
k.gtld.biz. 516672 IN A 156.154.72.65
j.gtld.biz. 516601 IN AAAA
2001:503:a124:ffff:ffff:ffff:ffff:ff7e
;; Query time: 438 msec
;; SERVER: 127.0.0.1#53(127.0.0.1)
;; WHEN: Tue Jun 30 10:32:37 2009
;; MSG SIZE rcvd: 232
% dig +norec customtruckgraphics.us ns @a.gtld.biz
; <<>> DiG 9.3.6-P1 <<>> +norec customtruckgraphics.us ns @a.gtld.biz
;; global options: printcmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 22320
;; flags: qr; QUERY: 1, ANSWER: 0, AUTHORITY: 2, ADDITIONAL: 0
;; QUESTION SECTION:
;customtruckgraphics.us. IN NS
;; AUTHORITY SECTION:
customtruckgraphics.us. 7200 IN NS NS1.OCTANEDNS.COM.
customtruckgraphics.us. 7200 IN NS NS2.OCTANEDNS.COM.
;; Query time: 242 msec
;; SERVER: 209.173.53.162#53(209.173.53.162)
;; WHEN: Tue Jun 30 10:33:22 2009
;; MSG SIZE rcvd: 89
So, the idea is to `dig ns us` and fish out any? of the NS's in the
result set, store that NS, and feed it to dig again, with `dig +norec
customtruckgraphics.us ns @a.gtld.biz` where `a.gtld.biz` is the
result I stored?
I can not
rebuild named entirely, as it was enough trouble getting DLZ working
on RHEL. I would just need to fish out dig, and build that separate.
I suspect you will find it easier to just fully upgrade.
You may need to go find test rpms. I'm not a Linux guy but
I'm sure they shouldn't be hard to find or for that matter
convert a existing source on.
I wish I could, the bind that they are running is the only one I could
find to get to work with DLZ, and it was core dumping all over the
place. I barely know linux, and would rather not touch it. If it is
possible to just build dig on rhel, I could go that route.
Though I am not understanding the versions, you were using 9.3.6 and I
am using
DiG 9.6.0-P1-RedHat-9.6.0-2.P1
Since I am more current than you, I would estimate that the one bug is
fixed if it is in your version, of course, that is not the case:
dig customtruckgraphics.us NS +trace -4 or -6 @4.2.2.1 +short
dig: can't find IPv6 networking.
Is this bug is a regression?
I am giving it a go to build it on RHEL now, and just pull dig out.
Thanks for any other help.
--
Scott * If you contact me off list replace talklists@ with scott@ *
_______________________________________________
bind-users mailing list
bind-users@lists.isc.org
https://lists.isc.org/mailman/listinfo/bind-users
