just before I've run "old" version. Should I just merely rerun the new one ... or some other additional actions are needed ? Thanks.
On Thursday, August 27, 2020 at 3:21:17 PM UTC+2, RobertCNelson wrote: > > On Thu, Aug 27, 2020 at 7:31 AM Robert Nelson <robert...@gmail.com > <javascript:>> wrote: > > > > On Thu, Aug 27, 2020 at 12:58 AM Pavel Yermolenko <py....@sunrise.ch > <javascript:>> wrote: > > > > > > Actually I have to start from scratch because as I mentioned before > BBB fails to boot from eMMC and the SD card is empty. > > > > No you don't, this is your decision. Grab a spare microSD and copy a > > console image to it, then you can boot with the spare microSD and fix > > the eMMC's extlinux.conf.. > > > > > Well I will once again regenerate the image in eMMC and once again > format the SD card in ext4. > > > At this critical stage, I had an empty SD card, formatted in ext4 with > a single "rootfs" partition. > > > So the next step (if my understanding is correct) was to create a boot > partition on the SD card, where I could then transfer MLO and u-boot.img. > > > You say I should edit exlinux.conf. > > > Ok i will do it as you suggest > > > And then? > > > What should I do with this exlinux.conf in order to create a boot > partition on the SD card. > > > BTW execution of generate_extlinux.sh (which creates exlinux.conf on > eMMC) corrupts eMMC: after execution of generate_extlinux.sh eMMC becomes > "unbootable". > > > > It's not unbootable, your using the eMMC, change the > > root=/dev/mmcblk0p1 to root=/dev/mmcblk1p1 > > > > It's hard-coded to the microSD because I spent about a minute writing > > generate_extlinux.sh to show 'how' it could be done.. > > > > > https://github.com/RobertCNelson/boot-scripts/blob/master/tools/generate_extlinux.sh#L16 > > > now fixed.. > https://github.com/RobertCNelson/boot-scripts/commit/52f044c01bf91827d771ff786ea39338add2076a > > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/565819b5-9d7f-4cd8-9a92-9af6a188045eo%40googlegroups.com.
