Actually I have to start from scratch because as I mentioned before BBB fails to boot from eMMC and the SD card is empty. Well I will once again regenerate the image in eMMC and once again format the SD card in ext4. At this critical stage, I had an empty SD card, formatted in ext4 with a single "rootfs" partition. So the next step (if my understanding is correct) was to create a *boot* partition on the SD card, where I could then transfer *MLO* and *u-boot.img* . You say I should edit *exlinux.conf*. Ok i will do it as you suggest And then? What should I do with this *exlinux.conf* in order to create a *boot* partition on the SD card. BTW execution of *generate_extlinux.sh* (which creates *exlinux.conf* on eMMC) corrupts eMMC: after execution of *generate_extlinux.sh* eMMC becomes "unbootable".
On Thursday, August 27, 2020 at 2:47:41 AM UTC+2, RobertCNelson wrote: > > It's the eMMC, use > > root=/dev/mmcblk1p1 > > in extlinux.conf. > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/61f7914f-75de-4514-a9db-3fb61d3b560bo%40googlegroups.com.
