The fastest interface would be McASP which can clock at 50MHz and with four channels channels will give you just under 200Mbps.
Regards, John > On Apr 10, 2016, at 9:23 AM, evilwulfie <[email protected]> wrote: > > high speed I2C : 3,2 Mbit/s > > SPI UP TO 10 Mbps > > UART SERIAL 921600 <--- I think the highest serial rate > > So it looks like SPI is your highest data rate other than ethernet. > > I Am not so sure that the BBB can keep with both interfaces saturated. > > But only further testing will see if that is the case > > I cant see any way to get 8MB on any of the other interfaces. > > Maybe raw parallel data between the BBBs using GPIO pins. > > > > On 4/9/2016 7:23 PM, [email protected] > <mailto:[email protected]> wrote: >> >> If I had two BBB devices sitting right next to each other, what would be the >> fastest way to send data from one to the other--excluding Ethernet? >> >> Specifically, I'd like to be able to: >> >> Read data in from one BBB Ethernet port, send the data (unidirectionally) >> from one BBB to the other. >> Examine the data on the receiving BBB, looking for key words and deleting >> them. >> And then send the modified data back out via the Ethernet port on the >> second/receiving BBB. >> To keep up with the 100Mb/s Ethernet pipe, I'd like to see data rates in >> the 8MByte/s range. >> >> I'd love to hear even the most bizarre suggestions... >> >> >> VR/John >> -- >> For more options, visit http://beagleboard.org/discuss >> <http://beagleboard.org/discuss> >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] >> <mailto:[email protected]>. >> For more options, visit https://groups.google.com/d/optout >> <https://groups.google.com/d/optout>. > > > -- > For more options, visit http://beagleboard.org/discuss > <http://beagleboard.org/discuss> > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] > <mailto:[email protected]>. > For more options, visit https://groups.google.com/d/optout > <https://groups.google.com/d/optout>. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
