> > *Do enthusiasts have professional equipment? No.* >> > > *That's an assumptio and depends on the definition of "enthusiast". I like > the point of view that Robert Budde shared above:* >
Exactly, well sort of. I would not consider myself an enthusiast, but I am a serious hobbyist. While I do not personally own such equipment, I do have access to just about anything a "professional" has access to in my home. As my buddy has been an EE for IDK 35 + years, and has acquired quite a collection. Professional grade Oscilloscopes, logic analyzers, emulators, 80's arcade PCB test equipment, and last but not least reflow ovens. One home made out of a convection oven using an MSP430 launchpad( for which I wrote the code ), and a professional infrared reflow oven. To be sure, there is a lot more, but I think the point is made. On Wed, Jul 8, 2015 at 9:14 AM, Maxim Podbereznyy <[email protected]> wrote: > well, they cost ~$1.7 each in Digikey and there is an Altium library for > the module where you can find the symbol and the footprint for the whole > module. I guess the Altium library can be imported to other CADs if > necessary. Having such library minimizes errors on the PCB. I did not have > any problems at all > > 2015-07-08 17:06 GMT+03:00 Robert Budde <[email protected]>: > >> In fact, those high density connectors can be a pain on their own: >> - they cost an awful lot of money even in medium quantaties >> - alignment is critical, especially if you have more than one per board. >> Small alignment errors - which sometimes are even hard to avoid when using >> properly designed alignment holes - can lead to stress on the contacts >> and/or result in contact failures. The tolerances allowed in the connector >> specs have to be split up to alignment errors on both baseboard and som - >> making life not easier. >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > > > -- > LinkedIn - http://www.linkedin.com/in/maximpodbereznyy > Company - http://www.linkedin.com/company/mentorel > Facebook - https://www.facebook.com/mentorel.company > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
