The TAPE group is OK, but not the complete story. For some reason my setup has sch0 (the name given to my autochanger) as a cd/dvd. I have added CRROM to by bareos user and i still does not work. Looking into have to change sch0 from CDROM to TAPE. root@backup:~# lsscsi [0:0:0:0] tape HP Ultrium 5-SCSI Z6DW /dev/st0 [0:0:0:1] mediumx HP 1x8 G2 AUTOLDR 4.30 /dev/sch0 [3:0:0:0] disk ATA Samsung SSD 850 2B6Q /dev/sda [4:0:0:0] disk ATA WDC WD5000AAKX-0 1H19 /dev/sdb [5:0:0:0] cd/dvd HL-DT-ST DVD-RAM GH10N EX02 /dev/sr0 [6:0:0:0] disk ATA WDC WD7501AALS-0 0K05 /dev/sdc
Greg On Monday, October 9, 2023 at 5:16:46 AM UTC-5 Andreas Rogge wrote: > Am 02.10.23 um 12:28 schrieb Philip Dalrymple: > > Yes but the default command (tape) had sudo in it so needed to be in the > > sudoers file, I had the same issue at my last company > > but that was 5 years ago and I had forgotten. > You don't need sudo. The bareos user should be in the "tape" group and > thus doesn't need sudo to run mtx. > > Best Regards, > Andreas > -- > Andreas Rogge [email protected] > Bareos GmbH & Co. KG Phone: +49 221-630693-86 <+49%20221%2063069386> > http://www.bareos.com > > Sitz der Gesellschaft: Köln | Amtsgericht Köln: HRA 29646 > Komplementär: Bareos Verwaltungs-GmbH > Geschäftsführer: Stephan Dühr, Jörg Steffens, Philipp Storz > -- You received this message because you are subscribed to the Google Groups "bareos-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/bareos-users/93f7f9d1-4336-40fb-bc64-2b2e184c4056n%40googlegroups.com.
