Hello, wt., 30 mar 2021 o 05:40 Vikrant Agarwal <vikran...@hotmail.com> napisał(a):
> Hi All , After upgrading firmware on the quantum to the newest , the > Drives doesn’t seems to be getting reconzied on the bacula . Getting > below error , Any advice and help please ? > > > > Enter autochanger drive[0]: > > Enter autochanger slot: 48 > > 3307 Issuing autochanger "unload slot 49, drive 0" command. > > 3995 Bad autochanger "unload slot 49, drive 0": ERR=Child exited with code > 1 > > Results=Unloading drive 0 into Storage Element 49...mtx: Request Sense: > Long Report=yes > > mtx: Request Sense: Valid Residual=no > > mtx: Request Sense: Error Code=70 (Current) > > mtx: Request Sense: Sense Key=Illegal Request > > mtx: Request Sense: FileMark=no > > mtx: Request Sense: EOM=no > > mtx: Request Sense: ILI=no > > mtx: Request Sense: Additional Sense Code = 53 > > mtx: Request Sense: Additional Sense Qualifier = 01 > > mtx: Request Sense: Field in Error = 00 > > mtx: Request Sense: BPV=no > > mtx: Request Sense: Error in CDB=no > > mtx: Request Sense: SKSV=yes > > mtx: Request Sense: Field Pointer = 00 00 > > MOVE MEDIUM from Element Address 256 to 4144 Failed > > > > *3901 Unable to open device ""Drive-0" (/dev/sg2)": ERR=dev.c:513 Unable > to open device "Drive-0" (/dev/sg2): ERR=Operation not permitted * > Are you absolutely sure that your autochanger/robot is at /dev/sg2 now? You can always check if your system recognizes your tape library using commands: lsscsi and mtx. If all in with these commands will work fine then Bacula will work too. best regards -- Radosław Korzeniewski rados...@korzeniewski.net
_______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
