Hello,
On 11/20/20 12:41 PM, Josh Fisher wrote:
On 11/19/20 1:32 PM, byron wrote:
I'm running version 9.0.6 on debian stretch
I have a tape library with two drives configured as follows in
bacula-sd.conf. I run 10 jobs every night and they always all run on
Drive-1. I'm now having a problem with that Drive and would like to
force all jobs to run on Drive-2. What's the easiest way to do that?
In bacula-sd.conf, place 'Autoselect = no' in the Device stanza of the
drive that is malfunctioning. Be sure to unload any tape that may be
in the drive before doing so. After updating bacula-sd.conf you will
need to restart SD.
In addition, you can change the order in the Device list of the
Autochanger resource, remove the faulty drive from the Autochanger
device list.
In more recent versions, the storage daemon will do some round robin
allocation to not use only the first device of the list. I don't
remember exactly when it was introduced, I would suggest to look the
ReleaseNotes.
Best Regards,
Eric
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
