On 02/10/2017 05:02 PM, Dan Langille wrote: >>>> NOTE: this message is not about resolving the permissions error. It is >>>> about [what appears to be] a DNS issue. >>>> >>>> Please help me understand which hostname is not being resolved in these >>>> messages. My checks with dig to verify DNS have found no errors. >>>> >>>> I have checked: >>>> >>>> Client: crey-fd >>>> Read Storage: "bacula-sd-01-file" >>>> Write Storage: "tape01" (From Job resource) >>>> >>>> I've checked the bacula configuration files, looked for the Address, and >>>> run 'dig +short' on the hostname >>>> >>>> Then, with the IP address from the previous dig, I do 'dig +short -x'. >>>> I get the original hostname. >>>> >>>> Ideas please? >>>> >>>> >>>> >>>> First email: >>>> ### >>>> 10-Feb 15:17 bacula-dir JobId 256313: Warning: FileSet MD5 digest not >>>> found. >>>> 10-Feb 15:17 bacula-dir JobId 256313: The following 1 JobId was chosen >>>> to be copied: 255998 >>>> 10-Feb 15:17 bacula-dir JobId 256313: Copying using JobId=255998 >>>> Job=slocum_jail_snapshots.2017-02-05_03.04.00_46 >>>> 10-Feb 15:17 bacula-dir JobId 256313: Bootstrap records written to >>>> /usr/local/bacula/working/bacula-dir.restore.27.bsr >>>> 10-Feb 15:17 bacula-dir JobId 256313: Start Copying JobId 256313, >>>> Job=CopyToTape-Full-LTO4.2017-02-10_15.17.52_17 >>>> 10-Feb 15:17 bacula-dir JobId 256313: Using Device "vDrive-0" to read. >>>> 10-Feb 15:17 bacula-sd-01-sd JobId 256313: Ready to read from volume >>>> "FullAuto-1369" on file device "vDrive-0" (/usr/local/bacula/volumes). >>>> 10-Feb 15:17 bacula-sd-01-sd JobId 256313: Forward spacing Volume >>>> "FullAuto-1369" to file:block 0:214. >>>> 10-Feb 15:18 bacula-sd-01-sd JobId 256313: Error: bsock.c:453 Wrote 3814 >>>> bytes to client:Hostname not found:9103, but only 0 accepted. >>>> 10-Feb 15:18 bacula-sd-01-sd JobId 256313: Fatal error: read.c:284 Error >>>> sending to File daemon. ERR=Broken pipe >>>> 10-Feb 15:18 bacula-sd-01-sd JobId 256313: Elapsed time=00:00:08, >>>> Transfer rate=14.46 K Bytes/second >>>> 10-Feb 15:18 bacula-sd-01-sd JobId 256313: Error: bsock.c:375 Socket has >>>> errors=1 on call to client:Hostname not found:9103 >>>> 10-Feb 15:18 bacula-sd-01-sd JobId 256313: Fatal error: fd_cmds.c:142 >>>> Read data not accepted >>>> 10-Feb 15:18 bacula-sd-01-sd JobId 256313: Error: bsock.c:375 Socket has >>>> errors=1 on call to client:Hostname not found:9103 >>>> 10-Feb 15:18 bacula-dir JobId 256313: Error: Bacula bacula-dir 7.4.4 >>>> (28Sep16): >>>> Build OS: amd64-portbld-freebsd11.0 freebsd 11.0-RELEASE-p6 >>>> Prev Backup JobId: 255998 >>>> Prev Backup Job: slocum_jail_snapshots.2017-02-05_03.04.00_46 >>>> New Backup JobId: 256314 >>>> Current JobId: 256313 >>>> Current Job: CopyToTape-Full-LTO4.2017-02-10_15.17.52_17 >>>> Backup Level: Full >>>> Client: crey-fd >>>> FileSet: "EmptyCopyToTape" 2011-02-20 20:53:31 >>>> Read Pool: "FullFile" (From Job resource) >>>> Read Storage: "bacula-sd-01-file" (From Pool resource) >>>> Write Pool: "FullsLTO4" (From Job resource) >>>> Write Storage: "tape01" (From Job resource) >>>> Catalog: "MyCatalog" (From Client resource) >>>> Start time: 10-Feb-2017 15:17:55 >>>> End time: 10-Feb-2017 15:18:05 >>>> Elapsed time: 10 secs >>>> Priority: 430 >>>> SD Files Written: 9 >>>> SD Bytes Written: 115,699 (115.6 KB) >>>> Rate: 11.6 KB/s >>>> Volume name(s): >>>> Volume Session Id: 98 >>>> Volume Session Time: 1486562541 >>>> Last Volume Bytes: 0 (0 B) >>>> SD Errors: 3 >>>> SD termination status: Error >>>> Termination: *** Copying Error *** >>>> ### >>>> >>>> Second email, which corresponds to the above copy job: >>>> ### >>>> 10-Feb 15:17 bacula-dir JobId 256314: Using Device "LTO_0" to write. >>>> 10-Feb 15:17 tape01-sd JobId 256314: 3991 Bad autochanger "loaded? drive >>>> 0" command: ERR=Child exited with code 1. >>>> Results=cannot open SCSI device '/dev/pass3' - Permission denied >>>> >>>> 10-Feb 15:17 tape01-sd JobId 256314: 3991 Bad autochanger "loaded? drive >>>> 0" command: ERR=Child exited with code 1. >>>> Results=cannot open SCSI device '/dev/pass3' - Permission denied >>>> >>>> 10-Feb 15:18 tape01-sd JobId 256314: 3991 Bad autochanger "loaded? drive >>>> 0" command: ERR=Child exited with code 1. >>>> Results=cannot open SCSI device '/dev/pass3' - Permission denied >>>> >>>> 10-Feb 15:18 tape01-sd JobId 256314: 3991 Bad autochanger "loaded? drive >>>> 0" command: ERR=Child exited with code 1. >>>> Results=cannot open SCSI device '/dev/pass3' - Permission denied >>>> >>>> 10-Feb 15:18 tape01-sd JobId 256314: 3991 Bad autochanger "loaded? drive >>>> 0" command: ERR=Child exited with code 1. >>>> Results=cannot open SCSI device '/dev/pass3' - Permission denied >>>> >>>> 10-Feb 15:18 tape01-sd JobId 256314: 3991 Bad autochanger "loaded? drive >>>> 0" command: ERR=Child exited with code 1. >>>> Results=cannot open SCSI device '/dev/pass3' - Permission denied >>>> >>>> 10-Feb 15:18 tape01-sd JobId 256314: 3304 Issuing autochanger "load slot >>>> 10, drive 0" command for vol 000013L4. >>>> 10-Feb 15:18 tape01-sd JobId 256314: Fatal error: 3992 Bad autochanger >>>> "load slot 10, drive 0": ERR=Child exited with code 1. >>>> Results=cannot open SCSI device '/dev/pass3' - Permission denied >>>> ### >>>> >>>> -- >>>> Dan Langille - BSDCan / PGCon >>>> d...@langille.org <mailto:d...@langille.org> <mailto:d...@langille.org>
> On 02/10/2017 06:14 PM, Dan Langille wrote: >>> On Feb 10, 2017, at 11:24 AM, Mike Fröhner <mikefroeh...@gmx.de >>> <mailto:mikefroeh...@gmx.de>> wrote: >>> >>> How do you client config look like for crey-fd? It must be something like: >>> >>> Client { >>> Name = crey-fd >>> Address = <hostname> >>> ... >>> } >>> >>> If you specify a hostname for Address this hostname must be resolvable. >> >> Yes: >> >> Client { >> Name = crey-fd >> Address = crey.int.unixathome.org <http://crey.int.unixathome.org> >> >> >>> Did you check this? >> >> Yes, that works: >> >> $ dig +short crey.int.unixathome.org <http://crey.int.unixathome.org> >> 10.55.0.10 >> $ dig +short -x 10.55.0.10 >> crey.int.unixathome.org <http://crey.int.unixathome.org>. >> $ > On Feb 10, 2017, at 12:18 PM, Mike Fröhner <mikefroeh...@gmx.de> wrote: > > If bacula-dir and -sd run on different hosts: Did you also verify this > works on the bacula-sd host and not just on the bacula-dir host. They are on different host. The checks were run on four hosts: - bacula-dir host - bacula-sd hosts (both read and write) - a fourth host unrelated to the backup -- Dan Langille - BSDCan / PGCon d...@langille.org ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
