NOTE: this message is not about resolving the permissions error. It is about
[what appears to be] a DNS issue.
Please help me understand which hostname is not being resolved in these
messages. My checks with dig to verify DNS have found no errors.
I have checked:
Client: crey-fd
Read Storage: "bacula-sd-01-file"
Write Storage: "tape01" (From Job resource)
I've checked the bacula configuration files, looked for the Address, and run
'dig +short' on the hostname
Then, with the IP address from the previous dig, I do 'dig +short -x'. I get
the original hostname.
Ideas please?
First email:
###
10-Feb 15:17 bacula-dir JobId 256313: Warning: FileSet MD5 digest not found.
10-Feb 15:17 bacula-dir JobId 256313: The following 1 JobId was chosen to be
copied: 255998
10-Feb 15:17 bacula-dir JobId 256313: Copying using JobId=255998
Job=slocum_jail_snapshots.2017-02-05_03.04.00_46
10-Feb 15:17 bacula-dir JobId 256313: Bootstrap records written to
/usr/local/bacula/working/bacula-dir.restore.27.bsr
10-Feb 15:17 bacula-dir JobId 256313: Start Copying JobId 256313,
Job=CopyToTape-Full-LTO4.2017-02-10_15.17.52_17
10-Feb 15:17 bacula-dir JobId 256313: Using Device "vDrive-0" to read.
10-Feb 15:17 bacula-sd-01-sd JobId 256313: Ready to read from volume
"FullAuto-1369" on file device "vDrive-0" (/usr/local/bacula/volumes).
10-Feb 15:17 bacula-sd-01-sd JobId 256313: Forward spacing Volume
"FullAuto-1369" to file:block 0:214.
10-Feb 15:18 bacula-sd-01-sd JobId 256313: Error: bsock.c:453 Wrote 3814 bytes
to client:Hostname not found:9103, but only 0 accepted.
10-Feb 15:18 bacula-sd-01-sd JobId 256313: Fatal error: read.c:284 Error
sending to File daemon. ERR=Broken pipe
10-Feb 15:18 bacula-sd-01-sd JobId 256313: Elapsed time=00:00:08, Transfer
rate=14.46 K Bytes/second
10-Feb 15:18 bacula-sd-01-sd JobId 256313: Error: bsock.c:375 Socket has
errors=1 on call to client:Hostname not found:9103
10-Feb 15:18 bacula-sd-01-sd JobId 256313: Fatal error: fd_cmds.c:142 Read data
not accepted
10-Feb 15:18 bacula-sd-01-sd JobId 256313: Error: bsock.c:375 Socket has
errors=1 on call to client:Hostname not found:9103
10-Feb 15:18 bacula-dir JobId 256313: Error: Bacula bacula-dir 7.4.4 (28Sep16):
Build OS: amd64-portbld-freebsd11.0 freebsd 11.0-RELEASE-p6
Prev Backup JobId: 255998
Prev Backup Job: slocum_jail_snapshots.2017-02-05_03.04.00_46
New Backup JobId: 256314
Current JobId: 256313
Current Job: CopyToTape-Full-LTO4.2017-02-10_15.17.52_17
Backup Level: Full
Client: crey-fd
FileSet: "EmptyCopyToTape" 2011-02-20 20:53:31
Read Pool: "FullFile" (From Job resource)
Read Storage: "bacula-sd-01-file" (From Pool resource)
Write Pool: "FullsLTO4" (From Job resource)
Write Storage: "tape01" (From Job resource)
Catalog: "MyCatalog" (From Client resource)
Start time: 10-Feb-2017 15:17:55
End time: 10-Feb-2017 15:18:05
Elapsed time: 10 secs
Priority: 430
SD Files Written: 9
SD Bytes Written: 115,699 (115.6 KB)
Rate: 11.6 KB/s
Volume name(s):
Volume Session Id: 98
Volume Session Time: 1486562541
Last Volume Bytes: 0 (0 B)
SD Errors: 3
SD termination status: Error
Termination: *** Copying Error ***
###
Second email, which corresponds to the above copy job:
###
10-Feb 15:17 bacula-dir JobId 256314: Using Device "LTO_0" to write.
10-Feb 15:17 tape01-sd JobId 256314: 3991 Bad autochanger "loaded? drive 0"
command: ERR=Child exited with code 1.
Results=cannot open SCSI device '/dev/pass3' - Permission denied
10-Feb 15:17 tape01-sd JobId 256314: 3991 Bad autochanger "loaded? drive 0"
command: ERR=Child exited with code 1.
Results=cannot open SCSI device '/dev/pass3' - Permission denied
10-Feb 15:18 tape01-sd JobId 256314: 3991 Bad autochanger "loaded? drive 0"
command: ERR=Child exited with code 1.
Results=cannot open SCSI device '/dev/pass3' - Permission denied
10-Feb 15:18 tape01-sd JobId 256314: 3991 Bad autochanger "loaded? drive 0"
command: ERR=Child exited with code 1.
Results=cannot open SCSI device '/dev/pass3' - Permission denied
10-Feb 15:18 tape01-sd JobId 256314: 3991 Bad autochanger "loaded? drive 0"
command: ERR=Child exited with code 1.
Results=cannot open SCSI device '/dev/pass3' - Permission denied
10-Feb 15:18 tape01-sd JobId 256314: 3991 Bad autochanger "loaded? drive 0"
command: ERR=Child exited with code 1.
Results=cannot open SCSI device '/dev/pass3' - Permission denied
10-Feb 15:18 tape01-sd JobId 256314: 3304 Issuing autochanger "load slot 10,
drive 0" command for vol 000013L4.
10-Feb 15:18 tape01-sd JobId 256314: Fatal error: 3992 Bad autochanger "load
slot 10, drive 0": ERR=Child exited with code 1.
Results=cannot open SCSI device '/dev/pass3' - Permission denied
###
--
Dan Langille - BSDCan / PGCon
d...@langille.org
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
