Bacula Version: 5.2.6 Operating System: Ubuntu 14.04.1 LTS Problem: I didn't have a backup of my database and I had to restore everything using bscan. All went well. I've re-attached my tape drive and verified it worked, but, when I try and restore a client, bacula hangs on "ready to read from volume" This is the output on my BAT job. I've checked my library config and tape 000006 is loaded into the drive. Why do you think it won't read the data? The client I'm restoring to can connect just fine. If there's any info i'm missing please let me know and I'd gladly provide it.
chronos-dir Start Restore Job RestoreFiles.2016-08-01_15.27.31_04 Using Device "SASDrive1" chronos-sd 3301 Issuing autochanger "loaded? drive 0" command. chronos-sd 3302 Autochanger "loaded? drive 0", result: nothing loaded. 3304 Issuing autochanger "load slot 6, drive 0" command. chronos-sd 3305 Autochanger "load slot 6, drive 0", status is OK. chronos-sd Ready to read from volume "000006" on device "SASDrive1" (/dev/st0). Thanks so much, Tyler
------------------------------------------------------------------------------
_______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
