Hello Carlo,
Don´t worry!
About to copying only the confs and db, I was supposing that on site2 there
would be an identical installation as it is on site1. Since clustering is
not a builtin Bacula functionality (I´m affraid there is one that I´m not
aware), I didn´t realize that it could be done between the two linux hosts.
Without the bacula-dir clustering solution, it would be a manual process
start bacula-dir on site2 when site1 becomes unavailable.
Thank you!
Best regards,
Ana
I'll put the two director in cluster, mysql in replication, and conf in
sync.
If you move only the conf and the db you can't do backup from site2,
because the machine check the IP address, with cluster I want to sckip this
problem.
On Mon, May 18, 2015 at 12:13 PM, Carlo Filippetto <
carlo.filippe...@gmail.com> wrote:
> Sorry for the delay!
>
>>
>>
>> On Fri, May 15, 2015 at 11:23 AM, Carlo Filippetto <
>> carlo.filippe...@gmail.com> wrote:
>>
>>> Thank you.
>>> I will use the sd2sd solution.
>>>
>>>
>>> 2015-05-15 15:54 GMT+02:00 Davide Giunchi <davide.giun...@soasi.com>:
>>>
>>>> problem: you need a lot of bandiwidth ( = € )! then you must keep
>>>> always sync the servers, periodically check that everithing is working
>>>> good, and then periodically to dr tests.
>>>> benefit: fast dr
>>>>
>>>
>>>
>>> I read about Virtual Full, I can use it to create a full on remote site
>>> instead off move the whole VM?
>>>
>>
>> Are you talking about Virtual Backup (Vbackup)? It is intended to
>> "consolidate" a full backup, the most recent differential and the following
>> incremental into one new full backup. This new full backup can be placed in
>> your site2.
>>
>
> Fantasctic, I read in the new features that I can consolidate not only the
> last, but the backup that I want.
>
>
>
>> I´m not sure if this is what you´re wondering. If you want to keep site2
>> with the same volume data as site1, you will need daily copy jobs for this
>> or some other kind of data replication.
>>
>
> Yes, I want to have the same data on site1 and site2, but I can't migrate
> 500Gb of Backup every night
>
> So I will do a first full migration, and after I'll go on only with the
> daily and I will use the consololitate backup (Vbackup) to have a full.
>
>
>
>>
>> The director master stay on site 1, the site 2 is offline since the firts
>>> goes down.
>>>
>>> The master on site 1 know the volumes on site 2 with SD to SD copy? (I
>>> think yes, it is an SD that he manage)
>>>
>>
>> Yes, if you use copy or migrate jobs. Are you also going to copy your
>> volumes data from site1 to site2?
>>
>> I´m not sure about your needs, but if you´re going to replicate your
>> volumes data from site1 to site2, I would prefer to replicate bacula´s
>> configuration files and a catalog backup from site1 to site2. And when you
>> need to use bacula on site2, you could just start it.
>>
>
>
>
> I'll put the two director in cluster, mysql in replication, and conf in
> sync.
> If you move only the conf and the db you can't do backup from site2,
> because the machine check the IP address, with cluster I want to sckip this
> problem.
>
> Thank you
>
>
>
>
------------------------------------------------------------------------------
One dashboard for servers and applications across Physical-Virtual-Cloud
Widest out-of-the-box monitoring support with 50+ applications
Performance metrics, stats and reports that give you Actionable Insights
Deep dive visibility with transaction tracing using APM Insight.
http://ad.doubleclick.net/ddm/clk/290420510;117567292;y
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
