Hello, I suspect that you need to read up on the "update slots" command in bconsole, or if you autochangers have barcodes, I believe it is "update slots barcodes". If you are not using the update slots command after every time you change the Volumes in the autochanger, Bacula will not know what Volumes are in the autochanger. Also, you *must* use a unique (different) MediaType = xxx for each autochanger or you will ultimately have Bacula asking for Volumes in an autochanger that are not there or are not to be loaded.
Best regards, Kern On 20.01.2015 20:44, Edward Appel wrote: > Hi List... > > > I have been having a rough time over the last year with this bacula > installation, hopefully someone can show me the noob failures I've made > thus far... > > > My setup is rather basic, a single director which mounts remote > filesystems and backs up ~40TB/week with a single file/storage daemon. > > I recently added an additional autochanger to the mix, to speed up write > times and prevent deadlocks on writers when running quarterly restores. > > My problem... > > bacula confuses the tape slots between the changers, in changer A tape > is in expected pool, but bacula will request the tape be mounted from > the same numbered slot in changer B, where the tape is not. > > I use two Quantum devices, a SuperLoader3/LTO5 and a Scalari40/LTO5. The > relevant config sections can be found at: > > http://pastebin.com/QVSwbrN0 > > > > Thanks in advance. > > ------------------------------------------------------------------------------ > New Year. New Location. New Benefits. New Data Center in Ashburn, VA. > GigeNET is offering a free month of service with a new server in Ashburn. > Choose from 2 high performing configs, both with 100TB of bandwidth. > Higher redundancy.Lower latency.Increased capacity.Completely compliant. > http://p.sf.net/sfu/gigenet > _______________________________________________ > Bacula-users mailing list > Bacula-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bacula-users > ------------------------------------------------------------------------------ New Year. New Location. New Benefits. New Data Center in Ashburn, VA. GigeNET is offering a free month of service with a new server in Ashburn. Choose from 2 high performing configs, both with 100TB of bandwidth. Higher redundancy.Lower latency.Increased capacity.Completely compliant. http://p.sf.net/sfu/gigenet _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
