Hello, is there a way to configure bacula that it will select the best currently available media type for a job?
I have a tape library with both LTO-3 and LTO-4 drives. Assume I add both LTO-3 and LTO-4 tapes to the same pool. I would like to configure bacula such that it will make optimal use of the available tape drives, i. e. it should run jobs referring to this specific pool both on the LTO-3 drive(s) [using LTO-3 media] and on the LTO-4 drive(s) [using LTO-4 media]. Can this be done? Would it be even possible to use the LTO-4 drive with LTO-3 media in the case there are no more LTO-4 media available for the needed pool? Thanks in advance. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de The flow chart is a most thoroughly oversold piece of program docu- mentation. -- Frederick Brooks, "The Mythical Man Month" ------------------------------------------------------------------------------ "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
