Hi Michael, Against my statement in [1] I have seen several timeouts with failed jobs. I have changed my tape library configuration to only notify me, if a cleaning requests raised by a tape drive. All jobs will still run (hopefully with correct data on tape, because the drive is still able to write correct data, but will have problems in the near future. Can someone confirm this?). Then I will manually start the cleaning.
As mention by Arno Lehmann in [2], you could increase the timeout Bacula will wait for the storage. Best Regards, Patrick [1] http://adsm.org/lists/html/Bacula-users/2013-01/msg00228.html [2] http://adsm.org/lists/html/Bacula-users/2008-12/msg00451.html On Fri, 28 Jun 2013, Michael Stauffer wrote: > Hi everyone, > > I'm setting up auto-clean on my autochanger (Quantum Scalar i500). The > docs say it will clean drives as needed when the host software > requests a drive unload, and then tell the host the drive is ready > only after the cleaning is complete. Seems reasonable. > > My question is whether bacula (I'm using 3.0.1) may timeout during > this operation, which takes about 3 minutes. Is there a place to set > the timeout on drive operations? > > Thanks, > Michael > > ------------------------------------------------------------------------------ > This SF.net email is sponsored by Windows: > > Build for Windows Store. > > http://p.sf.net/sfu/windows-dev2dev > _______________________________________________ > Bacula-users mailing list > Bacula-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bacula-users > ------------------------------------------------------------------------------ This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
