Please find attached bacula-sd.conf file with this mail. let me know where i have to change according to ouput of lsscsi -g command
Regards Rashid Ahmed On Tue, Apr 9, 2013 at 8:19 AM, rashid ahmed <rashidkah...@gmail.com> wrote: > Hi, > > Many Thanks! for replying as i am new in bacula server. > after typed this command lsscsi -g i got below o/p > [root@smhpmblb00 ~]# lsscsi -g > [0:2:0:0] disk IBM ServeRAID M5014 2.12 /dev/sda /dev/sg0 > [1:0:0:0] cd/dvd HL-DT-ST DVDRAM GT30N IS09 /dev/sr0 /dev/sg1 > [5:0:0:0] disk IBM 2145 0000 /dev/sdb /dev/sg2 > [5:0:0:1] disk IBM 2145 0000 /dev/sdc /dev/sg3 > [5:0:1:0] disk IBM 2145 0000 /dev/sdd /dev/sg4 > [5:0:1:1] disk IBM 2145 0000 /dev/sde /dev/sg5 > [5:0:2:0] tape IBM ULT3580-TD5 B170 /dev/st0 /dev/sg6 > [5:0:2:1] mediumx IBM 3573-TL A.40 /dev/sch0 /dev/sg7 > [6:0:0:0] disk IBM 2145 0000 /dev/sdf /dev/sg8 > [6:0:0:1] disk IBM 2145 0000 /dev/sdg /dev/sg9 > [6:0:1:0] disk IBM 2145 0000 /dev/sdh /dev/sg10 > [6:0:1:1] disk IBM 2145 0000 /dev/sdi /dev/sg11 > [6:0:2:0] tape IBM ULT3580-TD5 B170 /dev/st1 /dev/sg12 > [6:0:2:1] mediumx IBM 3573-TL A.40 /dev/sch1 /dev/sg13 > > > ################################################## /VAR/LOG/MESSAGE/ > ################################ > Below i got error message on 5th april after that all backup failed, > please advise how to fix this issue > > > > Apr 5 01:09:46 smhpmblb00 udevd-work[3045]: > rename(/dev/disk/by-id/scsi-360050768028081cedc00000000000026.udev-tmp, > /dev/disk/by-id/scsi-360050768028081cedc00000000000026) failed: No such > file or directory > > Apr 5 02:21:25 smhpmblb00 udevd-work[9089]: symlink(../../sdd, > /dev/disk/by-id/scsi-360050768028081cedc00000000000026.udev-tmp) failed: > File exists > > Apr 5 03:38:19 smhpmblb00 udevd-work[15005]: symlink(../../sdc, > /dev/disk/by-id/scsi-360050768028081cedc00000000000026.udev-tmp) failed: > File exists > > Apr 5 03:48:30 smhpmblb00 udevd-work[16423]: > rename(/dev/disk/by-id/scsi-360050768028081cedc00000000000027.udev-tmp, > /dev/disk/by-id/scsi-360050768028081cedc00000000000027) failed: No such > file or directory > > Apr 5 03:48:30 smhpmblb00 udevd-work[16434]: > rename(/dev/disk/by-id/scsi-360050768028081cedc00000000000027.udev-tmp, > /dev/disk/by-id/scsi-360050768028081cedc00000000000027) failed: No such > file or directory > > Apr 5 03:48:30 smhpmblb00 udevd-work[16044]: > rename(/dev/disk/by-id/wwn-0x60050768028081cedc00000000000026.udev-tmp, > /dev/disk/by-id/wwn-0x60050768028081cedc00000000000026) failed: No such > file or directory > > Apr 5 04:24:21 smhpmblb00 udevd-work[19252]: symlink(../../sde, > /dev/disk/by-id/scsi-360050768028081cedc00000000000026.udev-tmp) failed: > File exists > > Apr 5 04:44:53 smhpmblb00 udevd-work[20472]: > rename(/dev/disk/by-id/wwn-0x60050768028081cedc00000000000026.udev-tmp, > /dev/disk/by-id/wwn-0x60050768028081cedc00000000000026) failed: No such > file or directory > > Apr 5 05:36:06 smhpmblb00 udevd-work[25031]: symlink(../../sde, > /dev/disk/by-id/scsi-360050768028081cedc00000000000026.udev-tmp) failed: > File exists > > Apr 5 05:41:16 smhpmblb00 udevd-work[25450]: symlink(../../sde, > /dev/disk/by-id/scsi-360050768028081cedc00000000000026.udev-tmp) failed: > File exists > > Apr 5 06:06:47 smhpmblb00 udevd-work[27339]: symlink(../../sdb, > /dev/disk/by-id/scsi-360050768028081cedc00000000000026.udev-tmp) failed: > File exists > > Apr 5 06:53:00 smhpmblb00 udevd-work[31473]: symlink(../../sdd, > /dev/disk/by-id/wwn-0x60050768028081cedc00000000000026.udev-tmp) failed: > File exists > > Apr 5 07:03:21 smhpmblb00 udevd-work[31893]: > rename(/dev/disk/by-id/scsi-360050768028081cedc00000000000026.udev-tmp, > /dev/disk/by-id/scsi-360050768028081cedc00000000000026) failed: No such > file or directory > > Apr 5 07:23:53 smhpmblb00 udevd-work[1161]: symlink(../../sdc, > /dev/disk/by-id/scsi-360050768028081cedc00000000000026.udev-tmp) failed: > File exists > > Apr 5 07:39:19 smhpmblb00 udevd-work[3122]: > rename(/dev/disk/by-id/scsi-360050768028081cedc00000000000026.udev-tmp, > /dev/disk/by-id/scsi-360050768028081cedc00000000000026) failed: No such > file or directory > > Apr 5 07:54:38 smhpmblb00 udevd-work[4104]: > rename(/dev/disk/by-id/scsi-360050768028081cedc00000000000026.udev-tmp, > /dev/disk/by-id/scsi-360050768028081cedc00000000000026) failed: No such > file or directory > > Apr 5 08:04:49 smhpmblb00 udevd-work[5324]: > rename(/dev/disk/by-id/scsi-360050768028081cedc00000000000026.udev-tmp, > /dev/disk/by-id/scsi-360050768028081cedc00000000000026) failed: No such > file or directory > > Apr 5 08:15:09 smhpmblb00 udevd-work[6167]: symlink(../../sdd, > /dev/disk/by-id/scsi-360050768028081cedc00000000000026.udev-tmp) failed: > File exists > > Apr 5 08:30:30 smhpmblb00 udevd-work[7371]: > rename(/dev/disk/by-id/wwn-0x60050768028081cedc00000000000026.udev-tmp, > /dev/disk/by-id/wwn-0x60050768028081cedc00000000000026) failed: No such > file or directory > > Apr 5 08:35:31 smhpmblb00 udevd-work[7768]: symlink(../../sdd, > /dev/disk/by-id/scsi-360050768028081cedc00000000000026.udev-tmp) failed: > File exists > > Apr 5 08:51:45 smhpmblb00 kernel: st0: Error 70000 (driver bt 0x0, host > bt 0x7). > > ... > > Apr 5 10:05:08 smhpmblb00 kernel: lpfc 0000:1f:00.1: 1:(0):0713 SCSI > layer issued Device Reset (2, 0) return x2002 > > Apr 5 10:06:16 smhpmblb00 kernel: INFO: task multipathd:14739 blocked for > more than 120 seconds. > > Apr 5 10:06:16 smhpmblb00 kernel: "echo 0 > > /proc/sys/kernel/hung_task_timeout_secs" disables this message. > > Apr 5 10:06:16 smhpmblb00 kernel: multipathd D 0000000000000006 0 > 14739 1 0x00000080 > > > > > On Mon, Apr 8, 2013 at 6:51 PM, Marcin Haba <ganius...@gmail.com> wrote: > >> 2013/4/8 rashid ahmed <rashidkah...@gmail.com>: >> > Hi, >> > >> > Below is error message we are facing in bacula server. >> > smhpmblb00-dir shell command: run BeforeJob >> > "/etc/bacula/make_catalog_backup.pl MyCatalog" >> > >> > smhpmblb00-dir Using Device "Drive-1" >> > >> > Start Backup JobId 1379, Job=BackupCatalog.2013-04-08_08.36.42_14 >> > >> > smhpmblb00-sd 3304 Issuing autochanger "load slot 1, drive 0" command. >> > >> > 3991 Bad autochanger "loaded? drive 1" command: ERR=Child exited with >> code >> > 1. >> > >> > Results=cannot open SCSI device '/dev/sg8' - No such file or directory >> > >> > 3991 Bad autochanger "loaded? drive 0" command: ERR=Child exited with >> code >> > 1. >> > >> > Results=cannot open SCSI device '/dev/sg8' - No such file or directory >> > >> > 3991 Bad autochanger "loaded? drive 0" command: ERR=Child exited with >> code >> > 1. >> > >> > Results=cannot open SCSI device '/dev/sg8' - No such file or directory >> > >> > 3991 Bad autochanger "loaded? drive 0" command: ERR=Child exited with >> code >> > 1. >> > >> > Results=cannot open SCSI device '/dev/sg8' - No such file or directory >> > >> > smhpmblb00-dir >> > >> > Error: Bacula smhpmblb00-dir 5.2.12 (12Sep12): >> > >> > Build OS: x86_64-unknown-linux-gnu redhat Enterprise >> release >> > >> > JobId: 1379 >> > >> > Job: BackupCatalog.2013-04-08_08.36.42_14 >> > >> > Backup Level: Full >> > >> > Client: "SMC-BACKUP-Machine-fd" 5.2.12 (12Sep12) >> > x86_64-unknown-linux-gnu,redhat,Enterprise release >> > >> > FileSet: "Catalog" 2012-12-12 07:00:00 >> > >> > Pool: "Daily" (From Job resource) >> > >> > Catalog: "MyCatalog" (From Pool resource) >> > >> > Storage: "TS3200" (From command line) >> > >> > Scheduled time: 08-Apr-2013 08:35:43 >> > >> > Start time: 08-Apr-2013 08:37:39 >> > >> > End time: 08-Apr-2013 08:42:39 >> > >> > Elapsed time: 5 mins >> > >> > Priority: 10 >> > >> > FD Files Written: 0 >> > >> > SD Files Written: 0 >> > >> > FD Bytes Written: 0 (0 B) >> > >> > SD Bytes Written: 0 (0 B) >> > >> > Rate: 0.0 KB/s >> > >> > Software Compression: None >> > >> > VSS: no >> > >> > Encryption: no >> > >> > Accurate: no >> > >> > Volume name(s): >> > >> > Volume Session Id: 96 >> > >> > Volume Session Time: 1364803824 >> > >> > Last Volume Bytes: 4,615,028,296,704 (4.615 TB) >> > >> > Non-fatal FD errors: 1 >> > >> > SD Errors: 1 >> > >> > FD termination status: Error >> > >> > SD termination status: Error >> > >> > Termination: *** Backup Error *** >> > >> > smhpmblb00-fd Fatal error: job.c:2395 Bad response to Append Data >> command. >> > Wanted 3000 OK data >> > >> > , got 3903 Error append data >> > >> > smhpmblb00-sd Fatal error: 3992 Bad autochanger "load slot 1, dr >> > ive 0": ERR=Child died from signal 15: Termination. >> > >> > Results=Program killed by Bacula (timeout) >> > >> > If anyone knows the solution please let me know as soon as possible. >> >> Hi, >> >> It seems that your autochanger has another a SCSI generic special file >> (/dev/sg8) than is expected by Bacula Storage Daemon. It may be caused >> through: >> 1. Changes on SCSI bus (eg. connected new additional device) >> 2. Wrong configuration of the Bacula Storage Daemon. >> >> You should correct your bacula-sd.conf to current state of your >> system. I mean your /dev/sg8 definition. You can check special SCSI >> generic file for your autochanger eg. by next command: >> >> lsscsi -g >> >> Better solution is creating UDEV rules for your autochanger. In this >> case your autochanger and tape drives will be always fixed names >> defined by you. >> >> Regards. >> Marcin Haba (gani) >> >> >> -- >> "Większej miłości nikt nie ma nad tę, jak gdy kto życie swoje kładzie >> za przyjaciół swoich." Jezus Chrystus >> > >
bacula-sd.conf
Description: Binary data
------------------------------------------------------------------------------ Precog is a next-generation analytics platform capable of advanced analytics on semi-structured data. The platform includes APIs for building apps and a phenomenal toolset for data science. Developers can use our toolset for easy data analysis & visualization. Get a free account! http://www2.precog.com/precogplatform/slashdotnewsletter
_______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
