Hi,
Many Thanks! for replying as i am new in bacula server.
after typed this command lsscsi -g i got below o/p
[root@smhpmblb00 ~]# lsscsi -g
[0:2:0:0] disk IBM ServeRAID M5014 2.12 /dev/sda /dev/sg0
[1:0:0:0] cd/dvd HL-DT-ST DVDRAM GT30N IS09 /dev/sr0 /dev/sg1
[5:0:0:0] disk IBM 2145 0000 /dev/sdb /dev/sg2
[5:0:0:1] disk IBM 2145 0000 /dev/sdc /dev/sg3
[5:0:1:0] disk IBM 2145 0000 /dev/sdd /dev/sg4
[5:0:1:1] disk IBM 2145 0000 /dev/sde /dev/sg5
[5:0:2:0] tape IBM ULT3580-TD5 B170 /dev/st0 /dev/sg6
[5:0:2:1] mediumx IBM 3573-TL A.40 /dev/sch0 /dev/sg7
[6:0:0:0] disk IBM 2145 0000 /dev/sdf /dev/sg8
[6:0:0:1] disk IBM 2145 0000 /dev/sdg /dev/sg9
[6:0:1:0] disk IBM 2145 0000 /dev/sdh /dev/sg10
[6:0:1:1] disk IBM 2145 0000 /dev/sdi /dev/sg11
[6:0:2:0] tape IBM ULT3580-TD5 B170 /dev/st1 /dev/sg12
[6:0:2:1] mediumx IBM 3573-TL A.40 /dev/sch1 /dev/sg13
################################################## /VAR/LOG/MESSAGE/
################################
Below i got error message on 5th april after that all backup failed, please
advise how to fix this issue
Apr 5 01:09:46 smhpmblb00 udevd-work[3045]:
rename(/dev/disk/by-id/scsi-360050768028081cedc00000000000026.udev-tmp,
/dev/disk/by-id/scsi-360050768028081cedc00000000000026) failed: No such
file or directory
Apr 5 02:21:25 smhpmblb00 udevd-work[9089]: symlink(../../sdd,
/dev/disk/by-id/scsi-360050768028081cedc00000000000026.udev-tmp) failed:
File exists
Apr 5 03:38:19 smhpmblb00 udevd-work[15005]: symlink(../../sdc,
/dev/disk/by-id/scsi-360050768028081cedc00000000000026.udev-tmp) failed:
File exists
Apr 5 03:48:30 smhpmblb00 udevd-work[16423]:
rename(/dev/disk/by-id/scsi-360050768028081cedc00000000000027.udev-tmp,
/dev/disk/by-id/scsi-360050768028081cedc00000000000027) failed: No such
file or directory
Apr 5 03:48:30 smhpmblb00 udevd-work[16434]:
rename(/dev/disk/by-id/scsi-360050768028081cedc00000000000027.udev-tmp,
/dev/disk/by-id/scsi-360050768028081cedc00000000000027) failed: No such
file or directory
Apr 5 03:48:30 smhpmblb00 udevd-work[16044]:
rename(/dev/disk/by-id/wwn-0x60050768028081cedc00000000000026.udev-tmp,
/dev/disk/by-id/wwn-0x60050768028081cedc00000000000026) failed: No such
file or directory
Apr 5 04:24:21 smhpmblb00 udevd-work[19252]: symlink(../../sde,
/dev/disk/by-id/scsi-360050768028081cedc00000000000026.udev-tmp) failed:
File exists
Apr 5 04:44:53 smhpmblb00 udevd-work[20472]:
rename(/dev/disk/by-id/wwn-0x60050768028081cedc00000000000026.udev-tmp,
/dev/disk/by-id/wwn-0x60050768028081cedc00000000000026) failed: No such
file or directory
Apr 5 05:36:06 smhpmblb00 udevd-work[25031]: symlink(../../sde,
/dev/disk/by-id/scsi-360050768028081cedc00000000000026.udev-tmp) failed:
File exists
Apr 5 05:41:16 smhpmblb00 udevd-work[25450]: symlink(../../sde,
/dev/disk/by-id/scsi-360050768028081cedc00000000000026.udev-tmp) failed:
File exists
Apr 5 06:06:47 smhpmblb00 udevd-work[27339]: symlink(../../sdb,
/dev/disk/by-id/scsi-360050768028081cedc00000000000026.udev-tmp) failed:
File exists
Apr 5 06:53:00 smhpmblb00 udevd-work[31473]: symlink(../../sdd,
/dev/disk/by-id/wwn-0x60050768028081cedc00000000000026.udev-tmp) failed:
File exists
Apr 5 07:03:21 smhpmblb00 udevd-work[31893]:
rename(/dev/disk/by-id/scsi-360050768028081cedc00000000000026.udev-tmp,
/dev/disk/by-id/scsi-360050768028081cedc00000000000026) failed: No such
file or directory
Apr 5 07:23:53 smhpmblb00 udevd-work[1161]: symlink(../../sdc,
/dev/disk/by-id/scsi-360050768028081cedc00000000000026.udev-tmp) failed:
File exists
Apr 5 07:39:19 smhpmblb00 udevd-work[3122]:
rename(/dev/disk/by-id/scsi-360050768028081cedc00000000000026.udev-tmp,
/dev/disk/by-id/scsi-360050768028081cedc00000000000026) failed: No such
file or directory
Apr 5 07:54:38 smhpmblb00 udevd-work[4104]:
rename(/dev/disk/by-id/scsi-360050768028081cedc00000000000026.udev-tmp,
/dev/disk/by-id/scsi-360050768028081cedc00000000000026) failed: No such
file or directory
Apr 5 08:04:49 smhpmblb00 udevd-work[5324]:
rename(/dev/disk/by-id/scsi-360050768028081cedc00000000000026.udev-tmp,
/dev/disk/by-id/scsi-360050768028081cedc00000000000026) failed: No such
file or directory
Apr 5 08:15:09 smhpmblb00 udevd-work[6167]: symlink(../../sdd,
/dev/disk/by-id/scsi-360050768028081cedc00000000000026.udev-tmp) failed:
File exists
Apr 5 08:30:30 smhpmblb00 udevd-work[7371]:
rename(/dev/disk/by-id/wwn-0x60050768028081cedc00000000000026.udev-tmp,
/dev/disk/by-id/wwn-0x60050768028081cedc00000000000026) failed: No such
file or directory
Apr 5 08:35:31 smhpmblb00 udevd-work[7768]: symlink(../../sdd,
/dev/disk/by-id/scsi-360050768028081cedc00000000000026.udev-tmp) failed:
File exists
Apr 5 08:51:45 smhpmblb00 kernel: st0: Error 70000 (driver bt 0x0, host bt
0x7).
...
Apr 5 10:05:08 smhpmblb00 kernel: lpfc 0000:1f:00.1: 1:(0):0713 SCSI layer
issued Device Reset (2, 0) return x2002
Apr 5 10:06:16 smhpmblb00 kernel: INFO: task multipathd:14739 blocked for
more than 120 seconds.
Apr 5 10:06:16 smhpmblb00 kernel: "echo 0 >
/proc/sys/kernel/hung_task_timeout_secs" disables this message.
Apr 5 10:06:16 smhpmblb00 kernel: multipathd D 0000000000000006 0
14739 1 0x00000080
On Mon, Apr 8, 2013 at 6:51 PM, Marcin Haba <ganius...@gmail.com> wrote:
> 2013/4/8 rashid ahmed <rashidkah...@gmail.com>:
> > Hi,
> >
> > Below is error message we are facing in bacula server.
> > smhpmblb00-dir shell command: run BeforeJob
> > "/etc/bacula/make_catalog_backup.pl MyCatalog"
> >
> > smhpmblb00-dir Using Device "Drive-1"
> >
> > Start Backup JobId 1379, Job=BackupCatalog.2013-04-08_08.36.42_14
> >
> > smhpmblb00-sd 3304 Issuing autochanger "load slot 1, drive 0" command.
> >
> > 3991 Bad autochanger "loaded? drive 1" command: ERR=Child exited with
> code
> > 1.
> >
> > Results=cannot open SCSI device '/dev/sg8' - No such file or directory
> >
> > 3991 Bad autochanger "loaded? drive 0" command: ERR=Child exited with
> code
> > 1.
> >
> > Results=cannot open SCSI device '/dev/sg8' - No such file or directory
> >
> > 3991 Bad autochanger "loaded? drive 0" command: ERR=Child exited with
> code
> > 1.
> >
> > Results=cannot open SCSI device '/dev/sg8' - No such file or directory
> >
> > 3991 Bad autochanger "loaded? drive 0" command: ERR=Child exited with
> code
> > 1.
> >
> > Results=cannot open SCSI device '/dev/sg8' - No such file or directory
> >
> > smhpmblb00-dir
> >
> > Error: Bacula smhpmblb00-dir 5.2.12 (12Sep12):
> >
> > Build OS: x86_64-unknown-linux-gnu redhat Enterprise
> release
> >
> > JobId: 1379
> >
> > Job: BackupCatalog.2013-04-08_08.36.42_14
> >
> > Backup Level: Full
> >
> > Client: "SMC-BACKUP-Machine-fd" 5.2.12 (12Sep12)
> > x86_64-unknown-linux-gnu,redhat,Enterprise release
> >
> > FileSet: "Catalog" 2012-12-12 07:00:00
> >
> > Pool: "Daily" (From Job resource)
> >
> > Catalog: "MyCatalog" (From Pool resource)
> >
> > Storage: "TS3200" (From command line)
> >
> > Scheduled time: 08-Apr-2013 08:35:43
> >
> > Start time: 08-Apr-2013 08:37:39
> >
> > End time: 08-Apr-2013 08:42:39
> >
> > Elapsed time: 5 mins
> >
> > Priority: 10
> >
> > FD Files Written: 0
> >
> > SD Files Written: 0
> >
> > FD Bytes Written: 0 (0 B)
> >
> > SD Bytes Written: 0 (0 B)
> >
> > Rate: 0.0 KB/s
> >
> > Software Compression: None
> >
> > VSS: no
> >
> > Encryption: no
> >
> > Accurate: no
> >
> > Volume name(s):
> >
> > Volume Session Id: 96
> >
> > Volume Session Time: 1364803824
> >
> > Last Volume Bytes: 4,615,028,296,704 (4.615 TB)
> >
> > Non-fatal FD errors: 1
> >
> > SD Errors: 1
> >
> > FD termination status: Error
> >
> > SD termination status: Error
> >
> > Termination: *** Backup Error ***
> >
> > smhpmblb00-fd Fatal error: job.c:2395 Bad response to Append Data
> command.
> > Wanted 3000 OK data
> >
> > , got 3903 Error append data
> >
> > smhpmblb00-sd Fatal error: 3992 Bad autochanger "load slot 1, dr
> > ive 0": ERR=Child died from signal 15: Termination.
> >
> > Results=Program killed by Bacula (timeout)
> >
> > If anyone knows the solution please let me know as soon as possible.
>
> Hi,
>
> It seems that your autochanger has another a SCSI generic special file
> (/dev/sg8) than is expected by Bacula Storage Daemon. It may be caused
> through:
> 1. Changes on SCSI bus (eg. connected new additional device)
> 2. Wrong configuration of the Bacula Storage Daemon.
>
> You should correct your bacula-sd.conf to current state of your
> system. I mean your /dev/sg8 definition. You can check special SCSI
> generic file for your autochanger eg. by next command:
>
> lsscsi -g
>
> Better solution is creating UDEV rules for your autochanger. In this
> case your autochanger and tape drives will be always fixed names
> defined by you.
>
> Regards.
> Marcin Haba (gani)
>
>
> --
> "Większej miłości nikt nie ma nad tę, jak gdy kto życie swoje kładzie
> za przyjaciół swoich." Jezus Chrystus
>
------------------------------------------------------------------------------
Precog is a next-generation analytics platform capable of advanced
analytics on semi-structured data. The platform includes APIs for building
apps and a phenomenal toolset for data science. Developers can use
our toolset for easy data analysis & visualization. Get a free account!
http://www2.precog.com/precogplatform/slashdotnewsletter
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
