Am Samstag 16 März 2013, 13:05:24 schrieb John Drescher:
> On Sat, Mar 16, 2013 at 1:46 AM, Jean-Gabriel Duquesnoy
>
> <d...@jgduke.dnsalias.com> wrote:
> > Hi,
> >
> > I have installed Bacula 5.0.2 on Debian 6.0.3 using the packages,
I
> > did not compile and install Bacula from source code.
> > When going through the tutorial in the documentation, I keep
getting
> > an error upon run, this is the message I get:
> > 15-Mär 21:33 mail-dir JobId 8: No prior Full backup Job record
found.
> > 15-Mär 21:33 mail-dir JobId 8: No prior or suitable Full backup
found in
> > catalog. Doing FULL backup.
> > 15-Mär 21:33 mail-dir JobId 8: Start Backup JobId 8,
> > Job=Backupmail.2013-03-15_21.33.23_09
> > 15-Mär 21:33 mail-sd JobId 8: Fatal error: Device reservation failed
for
> > JobId=8:
> >
> > 15-Mär 21:33 mail-dir JobId 8: Fatal error:
> > Storage daemon didn't accept Device "/tmp" because:
> > 3924 Device "/tmp" not in SD Device resources.
> >
> > 15-Mär 21:33 mail-dir JobId 8: Error: Bacula mail-dir 5.0.2
(28Apr10):
> > 15-Mär-2013 21:33:25
> >
> > Build OS: i486-pc-linux-gnu debian 6.0.3
> > JobId: 8
> > Job: Backupmail.2013-03-15_21.33.23_09
> > Backup Level: Full (upgraded from Incremental)
> > Client: "mail-fd"
> > FileSet: "Full Set" 2013-03-12 23:05:00
> > Pool: "File" (From Job resource)
> > Catalog: "MyCatalog" (From Client resource)
> > Storage: "File" (From Job resource)
> > Scheduled time: 15-Mär-2013 21:33:21
> > Start time: 15-Mär-2013 21:33:25
> > End time: 15-Mär-2013 21:33:25
> > Elapsed time: 0 secs
> > Priority: 10
> > FD Files Written: 0
> > SD Files Written: 0
> > FD Bytes Written: 0 (0 B)
> > SD Bytes Written: 0 (0 B)
> > Rate: 0.0 KB/s
> > Software Compression: None
> > VSS: no
> > Encryption: no
> > Accurate: no
> > Volume name(s):
> > Volume Session Id: 2
> > Volume Session Time: 1363379424
> > Last Volume Bytes: 0 (0 B)
> > Non-fatal FD errors: 0
> > SD Errors: 0
> > FD termination status:
> > SD termination status:
> > Termination: *** Backup Error ***
> >
> > Unfortunately, as I am in the process of learning how bacula
works, It
> > is quite difficult to understand what is causing this error.
> > Would be great if someone could give me a hint.
>
> Please post your bacula-dir.conf and bacula-sd.conf. Remember to
blank
> out all passwords for security purposes.
>
> John
Please find attached both files with passwords removed.
Hope this will help find the root cause of my problem.
Best regard,
Jean-Gabriel
#
# Default Bacula Director Configuration file
#
# The only thing that MUST be changed is to add one or more
# file or directory names in the Include directive of the
# FileSet resource.
#
# For Bacula release 5.0.2 (28 April 2010) -- debian 6.0.3
#
# You might also want to change the default email address
# from root to your address. See the "mail" and "operator"
# directives in the Messages resource.
#
Director { # define myself
Name = mail-dir
DIRport = 9101 # where we listen for UA connections
QueryFile = "/etc/bacula/scripts/query.sql"
WorkingDirectory = "/var/lib/bacula"
PidDirectory = "/var/run/bacula"
Maximum Concurrent Jobs = 1
Password = "" # Console password
Messages = Daemon
DirAddress = 127.0.0.1
}
JobDefs {
Name = "DefaultJob"
Type = Backup
Level = Incremental
Client = mail-fd
FileSet = "Full Set"
Schedule = "WeeklyCycle"
Storage = File
Messages = Standard
Pool = File
Priority = 10
Write Bootstrap = "/var/lib/bacula/%c.bsr"
}
#
# Define the main nightly save backup job
# By default, this job will back up to disk in
/nonexistant/path/to/file/archive/dir
Job {
Name = "Backupmail"
JobDefs = "DefaultJob"
}
#Job {
# Name = "Backupduke40"
# Client = duke40-fd
# JobDefs = "DefaultJob"
#}
# Backup the catalog database (after the nightly save)
Job {
Name = "BackupCatalog"
JobDefs = "DefaultJob"
Level = Full
FileSet="Catalog"
Schedule = "WeeklyCycleAfterBackup"
# This creates an ASCII copy of the catalog
# Arguments to make_catalog_backup.pl are:
# make_catalog_backup.pl <catalog-name>
RunBeforeJob = "/etc/bacula/scripts/make_catalog_backup.pl MyCatalog"
# This deletes the copy of the catalog
RunAfterJob = "/etc/bacula/scripts/delete_catalog_backup"
Write Bootstrap = "/var/lib/bacula/%n.bsr"
Priority = 11 # run after main backup
}
#
# Standard Restore template, to be changed by Console program
# Only one such job is needed for all Jobs/Clients/Storage ...
#
Job {
Name = "RestoreFiles"
Type = Restore
Client=mail-fd
FileSet="Full Set"
Storage = File
Pool = Default
Messages = Standard
Where = /nonexistant/path/to/file/archive/dir/bacula-restores
}
# List of files to be backed up
FileSet {
Name = "Full Set"
Include {
Options {
signature = MD5
}
#
# Put your list of files here, preceded by 'File =', one per line
# or include an external list with:
#
# File = <file-name
#
# Note: / backs up everything on the root partition.
# if you have other partitions such as /usr or /home
# you will probably want to add them too.
#
# By default this is defined to point to the Bacula binary
# directory to give a reasonable FileSet to backup to
# disk storage during initial testing.
#
File = /usr/sbin
}
#
# If you backup the root directory, the following two excluded
# files can be useful
#
Exclude {
File = /var/lib/bacula
File = /nonexistant/path/to/file/archive/dir
File = /proc
File = /tmp
File = /.journal
File = /.fsck
}
}
#
# When to do the backups, full backup on first sunday of the month,
# differential (i.e. incremental since full) every other sunday,
# and incremental backups other days
Schedule {
Name = "WeeklyCycle"
Run = Full 1st sun at 23:05
Run = Differential 2nd-5th sun at 23:05
Run = Incremental mon-sat at 23:05
}
# This schedule does the catalog. It starts after the WeeklyCycle
Schedule {
Name = "WeeklyCycleAfterBackup"
Run = Full sun-sat at 23:10
}
# This is the backup of the catalog
FileSet {
Name = "Catalog"
Include {
Options {
signature = MD5
}
File = "/var/lib/bacula/bacula.sql"
}
}
# Client (File Services) to backup
Client {
Name = mail-fd
Address = localhost
FDPort = 9102
Catalog = MyCatalog
Password = "" # password for FileDaemon
File Retention = 30 days # 30 days
Job Retention = 6 months # six months
AutoPrune = yes # Prune expired Jobs/Files
}
#
# Second Client (File Services) to backup
# You should change Name, Address, and Password before using
#
#Client {
# Name = duke40-fd
# Address = localhost2
# FDPort = 9102
# Catalog = MyCatalog
# Password = "" # password for FileDaemon 2
# File Retention = 30 days # 30 days
# Job Retention = 6 months # six months
# AutoPrune = yes # Prune expired Jobs/Files
#}
# Definition of file storage device
Storage {
Name = File
# Do not use "localhost" here
Address = localhost # N.B. Use a fully qualified name here
SDPort = 9103
Password = ""
Device = /tmp
Media Type = File
}
# Definition of DDS tape storage device
#Storage {
# Name = DDS-4
# Do not use "localhost" here
# Address = localhost # N.B. Use a fully qualified name here
# SDPort = 9103
# Password = "" # password for Storage daemon
# Device = DDS-4 # must be same as Device in Storage
daemon
# Media Type = DDS-4 # must be same as MediaType in Storage
daemon
# Autochanger = yes # enable for autochanger device
#}
# Definition of 8mm tape storage device
#Storage {
# Name = "8mmDrive"
# Do not use "localhost" here
# Address = localhost # N.B. Use a fully qualified name here
# SDPort = 9103
# Password = ""
# Device = "Exabyte 8mm"
# MediaType = "8mm"
#}
# Definition of DVD storage device
#Storage {
# Name = "DVD"
# Do not use "localhost" here
# Address = localhost # N.B. Use a fully qualified name here
# SDPort = 9103
# Password = ""
# Device = "DVD Writer"
# MediaType = "DVD"
#}
# Generic catalog service
Catalog {
Name = MyCatalog
# Uncomment the following line if you want the dbi driver
# dbdriver = "dbi:sqlite3"; dbaddress = 127.0.0.1; dbport =
dbname = "bacula"; dbuser = ""; dbpassword = ""
}
# Reasonable message delivery -- send most everything to email address
# and to the console
Messages {
Name = Standard
#
# NOTE! If you send to two email or more email addresses, you will need
# to replace the %r in the from field (-f part) with a single valid
# email address in both the mailcommand and the operatorcommand.
# What this does is, it sets the email address that emails would display
# in the FROM field, which is by default the same email as they're being
# sent to. However, if you send email to more than one address, then
# you'll have to set the FROM address manually, to a single address.
# for example, a 'no-re...@mydomain.com', is better since that tends to
# tell (most) people that its coming from an automated source.
#
mailcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s
\"Bacula: %t %e of %c %l\" %r"
operatorcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\)
\<%r\>\" -s \"Bacula: Intervention needed for %j\" %r"
mail = root@localhost = all, !skipped
operator = root@localhost = mount
console = all, !skipped, !saved
#
# WARNING! the following will create a file that you must cycle from
# time to time as it will grow indefinitely. However, it will
# also keep all your messages if they scroll off the console.
#
append = "/var/lib/bacula/log" = all, !skipped
catalog = all
}
#
# Message delivery for daemon messages (no job).
Messages {
Name = Daemon
mailcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s
\"Bacula daemon message\" %r"
mail = root@localhost = all, !skipped
console = all, !skipped, !saved
append = "/var/lib/bacula/log" = all, !skipped
}
# Default pool definition
Pool {
Name = Default
Pool Type = Backup
Recycle = yes # Bacula can automatically recycle Volumes
AutoPrune = yes # Prune expired volumes
Volume Retention = 365 days # one year
}
# File Pool definition
Pool {
Name = File
Pool Type = Backup
Recycle = yes # Bacula can automatically recycle Volumes
AutoPrune = yes # Prune expired volumes
Volume Retention = 365 days # one year
Maximum Volume Bytes = 50G # Limit Volume size to something
reasonable
Maximum Volumes = 100 # Limit number of Volumes in Pool
}
# Scratch pool definition
Pool {
Name = Scratch
Pool Type = Backup
}
#
# Restricted console used by tray-monitor to get the status of the director
#
Console {
Name = mail-mon
Password = ""
CommandACL = status, .status
}
#
# Default Bacula Storage Daemon Configuration file
#
# For Bacula release 5.0.2 (28 April 2010) -- debian 6.0.3
#
# You may need to change the name of your tape drive
# on the "Archive Device" directive in the Device
# resource. If you change the Name and/or the
# "Media Type" in the Device resource, please ensure
# that dird.conf has corresponding changes.
#
Storage { # definition of myself
Name = mail-sd
SDPort = 9103 # Director's port
WorkingDirectory = "/var/lib/bacula"
Pid Directory = "/var/run/bacula"
Maximum Concurrent Jobs = 20
SDAddress = 127.0.0.1
}
#
# List Directors who are permitted to contact Storage daemon
#
Director {
Name = mail-dir
Password = ""
}
#
# Restricted Director, used by tray-monitor to get the
# status of the storage daemon
#
Director {
Name = mail-mon
Password = ""
Monitor = yes
}
#
# Note, for a list of additional Device templates please
# see the directory <bacula-source>/examples/devices
# Or follow the following link:
#
http://bacula.svn.sourceforge.net/viewvc/bacula/trunk/bacula/examples/devices/
#
#
# Devices supported by this Storage daemon
# To connect, the Director's bacula-dir.conf must have the
# same Name and MediaType.
#
Device {
Name = FileStorage
Device Type = File
Media Type = File
Archive Device = /tmp
LabelMedia = yes; # lets Bacula label unlabeled media
Random Access = Yes;
Requires Mount = no
AutomaticMount = no; # when device opened, read it
RemovableMedia = no;
AlwaysOpen = no;
}
#
# An autochanger device with two drives
#
#Autochanger {
# Name = Autochanger
# Device = Drive-1
# Device = Drive-2
# Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d"
# Changer Device = /dev/sg0
#}
#Device {
# Name = Drive-1 #
# Drive Index = 0
# Media Type = DLT-8000
# Archive Device = /dev/nst0
# AutomaticMount = yes; # when device opened, read it
# AlwaysOpen = yes;
# RemovableMedia = yes;
# RandomAccess = no;
# AutoChanger = yes
# #
# # Enable the Alert command only if you have the mtx package loaded
# # Note, apparently on some systems, tapeinfo resets the SCSI controller
# # thus if you turn this on, make sure it does not reset your SCSI
# # controller. I have never had any problems, and smartctl does
# # not seem to cause such problems.
# #
# Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
# If you have smartctl, enable this, it has more info than tapeinfo
# Alert Command = "sh -c 'smartctl -H -l error %c'"
#}
#Device {
# Name = Drive-2 #
# Drive Index = 1
# Media Type = DLT-8000
# Archive Device = /dev/nst1
# AutomaticMount = yes; # when device opened, read it
# AlwaysOpen = yes;
# RemovableMedia = yes;
# RandomAccess = no;
# AutoChanger = yes
# # Enable the Alert command only if you have the mtx package loaded
# Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
# If you have smartctl, enable this, it has more info than tapeinfo
# Alert Command = "sh -c 'smartctl -H -l error %c'"
#}
#
# A Linux or Solaris LTO-2 tape drive
#
#Device {
# Name = LTO-2
# Media Type = LTO-2
# Archive Device = /dev/nst0
# AutomaticMount = yes; # when device opened, read it
# AlwaysOpen = yes;
# RemovableMedia = yes;
# RandomAccess = no;
# Maximum File Size = 3GB
## Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d"
## Changer Device = /dev/sg0
## AutoChanger = yes
# # Enable the Alert command only if you have the mtx package loaded
## Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
## If you have smartctl, enable this, it has more info than tapeinfo
## Alert Command = "sh -c 'smartctl -H -l error %c'"
#}
#
# A Linux or Solaris LTO-3 tape drive
#
#Device {
# Name = LTO-3
# Media Type = LTO-3
# Archive Device = /dev/nst0
# AutomaticMount = yes; # when device opened, read it
# AlwaysOpen = yes;
# RemovableMedia = yes;
# RandomAccess = no;
# Maximum File Size = 4GB
## Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d"
## Changer Device = /dev/sg0
## AutoChanger = yes
# # Enable the Alert command only if you have the mtx package loaded
## Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
## If you have smartctl, enable this, it has more info than tapeinfo
## Alert Command = "sh -c 'smartctl -H -l error %c'"
#}
#
# A Linux or Solaris LTO-4 tape drive
#
#Device {
# Name = LTO-4
# Media Type = LTO-4
# Archive Device = /dev/nst0
# AutomaticMount = yes; # when device opened, read it
# AlwaysOpen = yes;
# RemovableMedia = yes;
# RandomAccess = no;
# Maximum File Size = 5GB
## Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d"
## Changer Device = /dev/sg0
## AutoChanger = yes
# # Enable the Alert command only if you have the mtx package loaded
## Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
## If you have smartctl, enable this, it has more info than tapeinfo
## Alert Command = "sh -c 'smartctl -H -l error %c'"
#}
#
# A FreeBSD tape drive
#
#Device {
# Name = DDS-4
# Description = "DDS-4 for FreeBSD"
# Media Type = DDS-4
# Archive Device = /dev/nsa1
# AutomaticMount = yes; # when device opened, read it
# AlwaysOpen = yes
# Offline On Unmount = no
# Hardware End of Medium = no
# BSF at EOM = yes
# Backward Space Record = no
# Fast Forward Space File = no
# TWO EOF = yes
# If you have smartctl, enable this, it has more info than tapeinfo
# Alert Command = "sh -c 'smartctl -H -l error %c'"
#}
#
# Send all messages to the Director,
# mount messages also are sent to the email address
#
Messages {
Name = Standard
director = mail-dir = all
}
------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_d2d_mar
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
