Hi comport3, first of all, your posting is somewhat hard to read with all the interspersed HTML entities. I will therefore exceptionally not answer in line. Perhaps you could avoid that in the future.
If I haven't overlooked anything, all the failures do indeed concern the changer, not the drives, and all the changer commands reported failure. I would therefore suspect a systematic error. Have you verified the changer configuration? IIRC the IBM 3573-TL had such configuration options as "sequential mode" which would substantially change the behaviour of the changer. Have you tried changing tapes via the web interface? Does that work correctly? Do the status pages of the web interface report any problems? Also, you write that the library has been tested successfully with mtx/mt. Was it connected to the same system then? Do you have access to the test results to check whether the same commands which are failing for you now have been performed successfully during those tests? HTH Tilman -- Tilman Schmidt Phoenix Software GmbH Bonn, Germany ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
