On 3/7/2012 5:28 PM, Phil Stracchino wrote: > On 03/07/2012 03:36 PM, Kern Sibbald wrote: >> Hello, >> >> In looking at the output below, I have a similar comment to Martin >> about bat and bconsole. First, you should understand that currently >> the Director only has a concept of a *single* console. When you >> run with bat, it puts the console in gui mode, and so if you are running >> any bconsoles at the same time and you just happen to get some output, >> you will probably get stuff destined for bat, which will completely confuse >> bconsole. > The only reason I had multiple consoles open in the first place is > trying to troubleshoot the problem. Normally I *only* have BAT running, > but it is in that case - only BAT open, no bconsoles running, two or > more manual jobs started or scheduled using BAT - that the problem > occurs, and both BAT and bconsole stop being able to connect to the > Director. Even if I kill BAT, I cannot start a bconsole until at least > one or two of the manually started jobs have completed.
Are you sure it is related to job completion and not just time? Does your firewall limit the number of new TCP connections to port 9101, as for example with the iptables -m limit module? ------------------------------------------------------------------------------ Virtualization & Cloud Management Using Capacity Planning Cloud computing makes use of virtualization - but cloud computing also focuses on allowing computing to be delivered as a service. http://www.accelacomm.com/jaw/sfnl/114/51521223/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
