Hey folks,
something strange is happening within my bacula configuration. Every help is
much appreciated!
1. This is, what bconsole--> status tells me about my tape drive. No pool?
Device "Drive-1" (/dev/nst0) is mounted with:
Volume: sonntag
Pool: *unknown*
Media type: LTO-4
Drive 0 status unknown.
Total Bytes Read=0 Blocks Read=0 Bytes/block=0
Positioned at File=0 Block=0
====
Used Volume status:
sonntag on device "Drive-1" (/dev/nst0)
Reader=0 writers=0 devres=0 volinuse=0
So, I can't update via update, right? How can I add a pool afterwards?
Best,
Steffen
------------------------------------------------------------------------------
Forrester Wave Report - Recovery time is now measured in hours and minutes
not days. Key insights are discussed in the 2010 Forrester Wave Report as
part of an in-depth evaluation of disaster recovery service providers.
Forrester found the best-in-class provider in terms of services and vision.
Read this report now! http://p.sf.net/sfu/ibm-webcastpromo
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
