On 2/13/2011 6:00 AM, rst wrote: > Thank you for your prompt reply. I'll try to answer both Kern and > Randy in this message.
One more point I wanted to throw out there - while Kern and the rest of the Bacula developers do an excellent job of making sure Bacula works on a wide range of configurations, you don't have to take their word for it. Instead, you can set up and run the regression suite: http://bacula.org/5.0.x-manuals/en/developers/developers/Bacula_Regression_Testing.html This way you can put Bacula through its paces on your own exact configuration and verify its functionality before trying to go live. In addition, if you do encounter any problems, the results will be visible to on the regression upload site, helping troubleshooting. -- Frank Sweetser fs at wpi.edu | For every problem, there is a solution that WPI Senior Network Engineer | is simple, elegant, and wrong. - HL Mencken GPG fingerprint = 6174 1257 129E 0D21 D8D4 E8A3 8E39 29E3 E2E8 8CEC ------------------------------------------------------------------------------ The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE: Pinpoint memory and threading errors before they happen. Find and fix more than 250 security defects in the development cycle. Locate bottlenecks in serial and parallel code that limit performance. http://p.sf.net/sfu/intel-dev2devfeb _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
