How did you determine it is corrupt? This? "Could not unserialize Volume"
Here is the output for just KL0339. | 102 | KL0339 | Append | 1 | 64,512 | 0 | 15,552,000 | 1 | 2 | 1 | LTO2 | 0000-00-00 00:00:00 | Not sure how to verify if /dev/nst0 is valid. This is how I originally determined to use /dev/st0. [r...@monk bacula]# dmesg | grep -B 2 -A 2 "tape" e1000: 0000:06:07.0: e1000_probe: (PCI:66MHz:32-bit) 00:11:43:e1:0f:a1 st: Version 20070203, fixed bufsize 32768, s/g segs 256 st 1:0:1:0: Attached scsi tape st0 st0: try direct i/o: yes (alignment 512 B) st 1:0:2:0: Attached scsi tape st1 st1: try direct i/o: yes (alignment 512 B) e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection Although, nst0 file does exist. [r...@monk bacula]# ls /dev/nst0 0 /dev/nst0 JJ -----Original Message----- From: John Drescher [mailto:dresche...@gmail.com] Sent: Friday, July 16, 2010 3:10 PM To: Jeremiah D. Jester Cc: bacula-users Subject: Re: [Bacula-users] Please mount volume... > I keep on getting this error after manually mount KL0339 into Drive1 > (/dev/st0) > > JJ > > [r...@monk bacula]# ./bin/bls -c /etc/bacula/bacula-sd.conf -V* -L /dev/st0 > bls: butil.c:281 Using device: "/dev/st0" for reading. > 16-Jul 14:58 bls JobId 0: Invalid slot=0 defined in catalog for Volume "*" on > "Drive1" (/dev/st0). Manual load may be required. > 16-Jul 14:58 bls JobId 0: 3301 Issuing autochanger "loaded? drive 0" command. > 16-Jul 14:58 bls JobId 0: 3302 Autochanger "loaded? drive 0", result is Slot > 2. > 16-Jul 14:58 bls JobId 0: Warning: acquire.c:265 Read acquire: Could not > unserialize Volume label: ERR=label.c:782 Expecting Volume Label, got > FI=352085 Stream=DATA len=46064 > > 16-Jul 14:58 bls JobId 0: Invalid slot=0 defined in catalog for Volume "*" on > "Drive1" (/dev/st0). Manual load may be required. > Mount Volume "*" on device "Drive1" (/dev/st0) and press return when ready: > 16-Jul 14:58 bls JobId 0: Invalid slot=0 defined in catalog for Volume "*" on > "Drive1" (/dev/st0). Manual load may be required. > 16-Jul 14:58 bls JobId 0: Warning: acquire.c:265 Read acquire: Could not > unserialize Volume label: ERR=label.c:782 Expecting Volume Label, got > FI=352085 Stream=DATA len=46064 > > 16-Jul 14:58 bls JobId 0: Invalid slot=0 defined in catalog for Volume "*" on > "Drive1" (/dev/st0). Manual load may be required. > Mount Volume "*" on device "Drive1" (/dev/st0) and press return when ready: > That volume is corrupted. This is why it could not load. Does your system have /dev/nst0? can you give me the bconsole output of list media pool=Offsite only for KL0339 if you have too many.. John ------------------------------------------------------------------------------ This SF.net email is sponsored by Sprint What will you do first with EVO, the first 4G phone? Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
