2010/6/8 Jeremiah D. Jester <jj...@u.washington.edu>: > > > I’ve just bacula is working state where it can connect to clients and the > the required daemons. I’m now trying to prepare a volume to write too via > bconsole. Is manual load usually required for bacula or is this a > configuration issue? > > > > Thanks. > > JJ > > > > *label > > Automatically selected Catalog: MyCatalog > > Using Catalog "MyCatalog" > > The defined Storage resources are: > > 1: File > > 2: Tape > > Select Storage resource (1-2): 2 > > Enter autochanger drive[0]: > > Enter new Volume name: Offsite-Vol1-6-8-10 > > Enter slot (0 or Enter for none): > > Defined Pools: > > 1: Catalog > > 2: Offsite > > 3: Onsite > > 4: Scratch > > Select the Pool (1-4): 2 > > Connecting to Storage daemon Tape at bacula.microslu.washington.edu:9103 ... > > Sending label command for Volume "Offsite-Vol1-6-8-10" Slot 0 ... > > Invalid slot=0 defined in catalog for Volume "" on "Drive1" (/dev/st0). > Manual load may be required. > > 3301 Issuing autochanger "loaded? drive 0" command. > > 3302 Autochanger "loaded? drive 0", result: nothing loaded. > > 3910 Unable to open device "Drive1" (/dev/st0): ERR=dev.c:491 Unable to open > device "Drive1" (/dev/st0): ERR=No medium found > > > > Label command failed for Volume Offsite-Vol1-6-8-10. > > Do not forget to mount the drive!!! > > You have messages. >
BTW, Does your changer have a barcode reader? John ------------------------------------------------------------------------------ ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
