I've just bacula is working state where it can connect to clients and the the
required daemons. I'm now trying to prepare a volume to write too via bconsole.
Is manual load usually required for bacula or is this a configuration issue?
Thanks.
JJ
*label
Automatically selected Catalog: MyCatalog
Using Catalog "MyCatalog"
The defined Storage resources are:
1: File
2: Tape
Select Storage resource (1-2): 2
Enter autochanger drive[0]:
Enter new Volume name: Offsite-Vol1-6-8-10
Enter slot (0 or Enter for none):
Defined Pools:
1: Catalog
2: Offsite
3: Onsite
4: Scratch
Select the Pool (1-4): 2
Connecting to Storage daemon Tape at bacula.microslu.washington.edu:9103 ...
Sending label command for Volume "Offsite-Vol1-6-8-10" Slot 0 ...
Invalid slot=0 defined in catalog for Volume "" on "Drive1" (/dev/st0). Manual
load may be required.
3301 Issuing autochanger "loaded? drive 0" command.
3302 Autochanger "loaded? drive 0", result: nothing loaded.
3910 Unable to open device "Drive1" (/dev/st0): ERR=dev.c:491 Unable to open
device "Drive1" (/dev/st0): ERR=No medium found
Label command failed for Volume Offsite-Vol1-6-8-10.
Do not forget to mount the drive!!!
You have messages.
*
Jeremiah Jester
Senior Informatics Specialist
Microbiology, Katze Lab
Box 357242
P: 206-732-6185
------------------------------------------------------------------------------
ThinkGeek and WIRED's GeekDad team up for the Ultimate
GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the
lucky parental unit. See the prize list and enter to win:
http://p.sf.net/sfu/thinkgeek-promo
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
