> Someone mentioned that changing "Always open" to "no" could help, but that > kind of scares me. I'd like the protection of preventing removal, as long a > Bacula can re-enable it when it needs to change tapes. > I've had multiple drives changed out, and have updated the firmware on the > drives and library a number of times in the last couple of years to try and > fix this problem, but non of the fixes it, so I think it's either something > Bacula or the kernel/mtx is doing. >
What happens to me is that it is possible to get in a state where the robot will not remove tapes from one or both drived. I can eject the tape from the drive but when mtx or the move commands on the changer itself both fail. I have been able to reset this situation by stopping bacula-sd then unload the st and scsi card module then reenabling both and restarting bacula-sd. John ------------------------------------------------------------------------------ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
