On Thu, May 13, 2010 at 7:33 PM, Frandin, Dave <dave.fran...@nv.doe.gov> wrote: > Hello List! > > I'm new to Bacula, we have set up a system to serve as an > evaluation/test Bacula server (director, storage, file daemons, Bacula > 5.0.1, on CentOS5.4, with a spare SCSI DLT drive). I built the server > from source using the "Traditional Redhat Linux install" specs shown in > the user manual. The director talks to the local file/storage daemons > fine, btape was happy with my tape drive, several test jobs were run > using the FD on the test machine ok. Now my boss wants me to test on one > of our production machines with just the FD installed there. I've done > this, and the director connects to the FD on the production machine fine > when I do a "status" from bconsole, I can do an "estimate" of the small > test job I've set up, and bconsole's "estimate" shows the amount of data > I would expect to see, however... when I try to run the job that I just > did the estimate on, the job hangs for 30 min and 1 sec, showing 0 FD > files written, 0 SD files written, no SD errors, but shows an FD > termination status of "Error" and SD termination status "Waiting on FD", > and Termination "*** Backup Error ***". We are evaluating Bacula to > replace the current Symantec BackupExec/RALUS that we currently use.. > > > Any assistance would be greatly appreciated.. >
If you have localhost or 127.0.0.1 in any address for any of the bacula configuration files remove that. Also is there a firewall that prevents the FD from initiating a connection to the SD? John ------------------------------------------------------------------------------ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
