Hello List! I'm new to Bacula, we have set up a system to serve as an evaluation/test Bacula server (director, storage, file daemons, Bacula 5.0.1, on CentOS5.4, with a spare SCSI DLT drive). I built the server from source using the "Traditional Redhat Linux install" specs shown in the user manual. The director talks to the local file/storage daemons fine, btape was happy with my tape drive, several test jobs were run using the FD on the test machine ok. Now my boss wants me to test on one of our production machines with just the FD installed there. I've done this, and the director connects to the FD on the production machine fine when I do a "status" from bconsole, I can do an "estimate" of the small test job I've set up, and bconsole's "estimate" shows the amount of data I would expect to see, however... when I try to run the job that I just did the estimate on, the job hangs for 30 min and 1 sec, showing 0 FD files written, 0 SD files written, no SD errors, but shows an FD termination status of "Error" and SD termination status "Waiting on FD", and Termination "*** Backup Error ***". We are evaluating Bacula to replace the current Symantec BackupExec/RALUS that we currently use..
Any assistance would be greatly appreciated.. Dave Compile Configuration CFLAGS="-g -Wall" ./configure \ --sbindir=/usr/sbin \ --sysconfdir=/etc/bacula \ --with-scriptdir=/etc/bacula \ --enable-smartalloc \ --enable-bat \ --with-mysql \ --with-working-dir=/var/bacula \ --with-pid-dir=/var/run \ --enable-conio ------------------------------------------------------------------------------ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
