> Yes I am using a tape but should not be the tape > 07-Apr 00:36 angel-sd JobId 1443: Despooling elapsed time = 00:02:34, > Transfer rate = 75.16 M bytes/second > > > this is with a full backup > > FD Files Written: 2,878,988 > SD Files Written: 2,878,988 > FD Bytes Written: 248,635,057,283 (248.6 GB) > SD Bytes Written: 249,102,272,590 (249.1 GB) > Rate: 18745.1 KB/s > > On my mind I was hoping something around 30KB/s > You mean 30MB/s.
I get 20 to 35MB/s for full backups with LTO2 from a raid5 array to a LTO2 autochanger that is not on the same machine as the raid. It looks like you have an LTO3 changer by the 75MB/s since that is a little low for LTO4 however you named the drive LTO4Driver so I assume its LTO4. I would expect despools of 100MB/s to 120MB/s for LTO4. I would first look to optimize your filesystem performance as this appears to be where the problem is. Is your spooling drive the same as your source data drive? That would kill performance. John ------------------------------------------------------------------------------ Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
