On 12 March 2010 13:04, John Drescher <dresche...@gmail.com> wrote:
> > yeah, maybe it is a timing issue , (the changer isn't the newest) the
> msgs
> > didnt seem to be related to the job that was waiting, but i could be
> wrong.
> > The issue is that , say, slot 1 is labelled correctly, 2 and 3 not, 4
> > through 7 Ok. Sometimes it's one failed, sometimes 2, not the same all
> the
> > time. Not earth shattering, but non-automatic.
> >
>
> If it is a timing issue then you need to fix your mtx-changer script
> (to work with your changer) because your backups will have the same
> problem as label barcodes.
>
> Did you run the autochanger tests that are described in the manual?
>
> John
>
thanks for the pointer, I'll look into that. I haven't seen any errors from
the backups, so it may all be in my imagination.
thanks again,
_________________________
{Beto|Norberto|Numard} Meijome
"The only people that never change are the stupid and the dead"
Jorge Luis Borges.
I speak for myself, not my employer. Contents may be hot. Slippery when wet.
Reading disclaimers makes you go blind. Writing them is worse. You have been
Warned.
------------------------------------------------------------------------------
Download Intel® Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune applications for parallel performance.
See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
