Delete the volume files from the USB drive and try again without issuing the update slots command before the label barcodes.
T. Plancon wrote: > Hello, > > I'm working on setting up Bacula 2.4.2 with the current version of > vchanger 0.8.2 from Sourceforge, using USB drives on CentOS 5.2. > Everything is going pretty much as described in the vchanger HowTo, > however "label barcodes" fails. the following is from console in BAT, > after attaching USB drive: > > update slots > Select Storage resource (1-2): Connecting to Storage daemon usbbcla1 at > p-plover:9103 ... > 3306 Issuing autochanger "slots" command. > Device "usbchanger" has 9 slots. > Connecting to Storage daemon usbbcla1 at p-plover:9103 ... > 3306 Issuing autochanger "list" command. > Volume "usbbcla1_0001_0001" not found in catalog. Slot=1 InChanger set > to zero. > Volume "usbbcla1_0001_0002" not found in catalog. Slot=2 InChanger set > to zero. > ................... > Volume "usbbcla1_0001_0008" not found in catalog. Slot=8 InChanger set > to zero. > Volume "usbbcla1_0001_0009" not found in catalog. Slot=9 InChanger set > to zero. > > label barcodes > Connecting to Storage daemon usbbcla1 at p-plover:9103 ... > Sending label command for Volume "usbbcla1_0001_0001" Slot 1 ... > 3301 Issuing autochanger "loaded? drive 0" command. > 3302 Autochanger "loaded? drive 0", result: nothing loaded. > 3304 Issuing autochanger "load slot 1, drive 0" command. > 3305 Autochanger "load slot 1, drive 0", status is OK. > 3000 OK label. VolBytes=221 DVD=0 Volume="usbbcla1_0001_0001" > Device="usbchanger-drive-0" (/var/lib/bacula/usbbcla1/drive0) > Catalog record for Volume "usbbcla1_0001_0001", Slot 1 successfully > created. > Sending label command for Volume "usbbcla1_0001_0002" Slot 2 ... > 3307 Issuing autochanger "unload slot 1, drive 0" command. > 3304 Issuing autochanger "load slot 2, drive 0" command. > 3305 Autochanger "load slot 2, drive 0", status is OK. > 3920 Cannot label Volume because it is already labeled: "usbbcla1_0001_0001" > Label command failed for Volume usbbcla1_0001_0002. > Sending label command for Volume "usbbcla1_0001_0003" Slot 3 ... > .......... > 3920 Cannot label Volume because it is already labeled: "usbbcla1_0001_0001" > Label command failed for Volume usbbcla1_0001_0008. > Sending label command for Volume "usbbcla1_0001_0009" Slot 9 ... > 3307 Issuing autochanger "unload slot 8, drive 0" command. > 3304 Issuing autochanger "load slot 9, drive 0" command. > 3305 Autochanger "load slot 9, drive 0", status is OK. > 3920 Cannot label Volume because it is already labeled: "usbbcla1_0001_0001" > Label command failed for Volume usbbcla1_0001_0009. > > I tried running a job just to see what would happen. usbbcla1_0001_0001 > filled successfully and then bacula asked for a new volume but said no > volumes could be found. Bacula seems to have labeled the first volume in > "slot 1" of the "magazine" successfully. But every attempt to label the > next volume in the next "slot" failed saying the first volume is already > labeled. > > Any thoughts as to what could be going wrong here are greatly > appreciated! Thanks! > ------------------------------------------------------------------------------ Stay on top of everything new and different, both inside and around Java (TM) technology - register by April 22, and save $200 on the JavaOne (SM) conference, June 2-5, 2009, San Francisco. 300 plus technical and hands-on sessions. Register today. Use priority code J9JMT32. http://p.sf.net/sfu/p _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
